Satellite pour kit de réparation de fentes / fissures pare-brise

Reference: 512

Miniature 220V/12V cigarette lighter voltage transformers

Miniature 220V/12V cigarette-lighter voltage transformers, for recharging equipment with a cigarette-lighter connector. Ex. UV lamp, drill, etc.

Reference: LP10

Magnifying glass (15x zoom) for visual impact on windscreen

Plastic magnifying glass (15x zoom) with transparent base. Excellent tool for identifying the type of impact, but also for viewing the impurities contained within it.

Reference: HOS-2010

Rubber Seals (x2) for HOS-2000, HOS-2000-L, HOS-1000-T vacuum pump hoses

Set of 2 replacement rubber seals for HOS-2000, HOS-2000-L and HOS-1000-T hose It is important to change the rubber seals frequently to ensure that the windshield repair resin is injected correctly. The rubber seal is situated inside the connector on your hose. If there is a leak in the hose, you can change the seal by using a wrench and unscrewing the...

Reference: TER-CHARGEUR

Brand: TERMINATOR

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits. Connect the charger to your TERMINATOR or ULTRAPOSE EVOLUTION to recharge the battery.

Reference: 645

Brand: REPARBRISE

12V carbide drill for impact drilling

12V carbide drill supplied with integrated chuck lock, for drilling the impact point on your windshield before injecting the resin. Use with our 934, 4509w and 701 carbide drills. This drill can also be used with a felt for polishing the impact after repair. 4M cable extension

Reference: 5BX-02010

Rubber seals Ø 1.5 cm for large impact injector 5096 and FIX-2005

Ø 1.5 cm seals for large impact injector 5096 and FIX-2005. It is important to change the seals regularly to ensure a good seal when injecting windshield repair resin. 1 bag of 5 pieces

Reference: TER-BATTERIE

Brand: TERMINATOR

Battery for Kit TERMINATOR 1 and 2 and ULTRAPOSE EVOLUTION

Battery for TERMINATOR 1 and 2 Kit and ULTRAPOSE EVOLUTION. You can recharge this battery directly on the TERMINATOR or ULTRAPOSE EVOLUTION, using our TER-CHARGEUR charger.

Reference: 994CLAP

Brand: REPAREGLASS

Plunger for Injector Inox 994

Inox 994 injector plunger for windshield impact repair

Reference: 974

Special syringe for injecting resin to repair windshields

The syringe ref.974 will allow you to take the injection resin from inside the bottle or pipette and then inject it into the injector. You can also use the syringe to fill drill holes and cracks in your Windshield.

Reference: 994

Brand: REPARBRISE

Injector for windshield repair resin for KIT-1320 - TERMINATOR 1 AND 2

Injector nozzle for applying windscreen repair resin using a vacuum/pressure pump. 1. Injection performance and precision Efficient resin injection: This nozzle is specially designed for applying repair resin to windscreen impacts using a vacuum/pressure pump. This technology allows for precise and even injection, guaranteeing a high-quality repair....

Reference: 993

Brand: REPARBRISE

Pressure vacuum pump for REPAR'VIT Senior 1320 kit

Vacuum pump delivered with hose ref.996 (quick connector on injector side and direct connection on pump) The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump...

Reference: 1110

Brand: REPAR'VIT

Pressure vacuum pump for REPAR'VIT 1330 kit

The pressure vacuum pump 1110 is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump will inject the resin uniformly into the impact.

Reference: FLEXI-BLADE

Flexible silicone wiper blade for windows and bodywork

Flexible wiper blade made in silicone. Allow to ease the removal of the water from surface to be dried. Appliable on the glass and metal.

Reference: HOS-2000

1M connector hose for 1110 pump and PMP-ADVANTAGE

Connection hose for vacuum pump 1110 and PMP-ADVANTAGE and injector 5095 or 5096 for windshield repair. Length: 1M

Reference: PMP-ADVANTAGE

Brand: REPAR'VIT

Pressure vacuum pump for REPAR'VIT kit 1330SPECIAL and 1300

The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump will inject the resin uniformly into the impact.

Reference: FIX-5035

Brand: REPAREGLASS

Plastic screw for FIX-2001 injection bridge

Plastic screw for injection bridge FIX-2001 allows the bridge to be adjusted to create a uniform sealing.

Reference: 768

Foam window / windshield cleaner 768 - Mosquito repellent

Effectively remove traces of oil, insects and dust with the foam-based 768 glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...

Reference: PEZ-120

Anti-skid roof/hood liner

Protect the paintwork on your vehicle's roof or hood when you're working on it, with our non-slip protective canvas. Ideal for bodybuilders and garages, it offers a practical and safe solution for fitting tools, screws and small assembly equipment without the risk of damaging the vehicle's surface. Dimensions and weight : Dimensions: 1720 x 700 x 2 mm....

Reference: 818

Windshield heater for impact repair

The WINDSHIELD HEATER warms the repair area, usb powered, supplied with adapter + 5 thermometers Ref. 961 12v cigarette lighter and 220v mains, 2.5m cable, ideal for impact repairs, red or black depending on availability.

Reference: FIX-2005

Brand: REPAR'VIT

Large impact resin filler injector for REF -2000 bridge

Large impact resin filler injector for REF-2000 Ø 1.5 cm bridge.

Reference: 5095

Brand: REPARBRISE

Standard injector 5095 for kit 1330 and 1330SPECIAL

Standard injector for kit ref.1330 and kit ref.1330SPECIAL. Supplied with seal, not compatible with our old 1310 kit.

Reference: IFA-300

Infrared thermometer for glass temperature control

Infrared thermometer for checking the temperature on your Windshield. 

Reference: 3200

Brand: REPARBRISE

REPARBRISE Injector: Cylinder + piston for injection of windshield repair resin

REPAIR injector composed of a high quality cylinder + piston. Composed of 5 lips which allow an additional depression and a faster repair. Adapts to our injection bridges ref.51 and 9620. To avoid any leaks due to seal wear, we recommend that you also order the interchangeable end caps ref 3202 when purchasing the injector.

Reference: ADAPT-PBV

Adapter for vertical or reverse glazing

ADAPTER FOR VERTICAL OR INVERTED GLAZING Truck, bus, tractor, public works, combine harvester type.... The adaptor enables repairs to be carried out on vertical windscreens with a negative tilt of up to 20°. For use with injector 994, our 9620 bridge for TERMINATOR 1 and 2 cases, and 1320. Not compatible with FIX-2001, 2000, 367 and 51 bridges, cannot be...

Reference: 969

Long probe for impact repair

Large probe, for perfect centring of the repair and easier resin injection.

Reference: 940

LED lighting mirror (glass)

LED lighted mirror (glass) for repairing windshield impacts, this mirror allows you to visualise the impact throughout its repair, it has LED lighting. Size. 6.5cm x 4cm

Reference: HOS-2002

Cleaning brush for injector 5069 or 5062

Nylon cleaning brush for injector 5069 or 5062 to clean excess injection resin from the windscreen

Reference: FIX-5063-DESTOCK

Brand: REPAR'VIT

Aluminium screw for injection bridge 367

Aluminium screw for injection bridge 367, holds injectors 5095 and 5096 to the windshield to ensure a seal during resin injection.

Reference: 994JOINT

Brand: REPAREGLASS

Seal for 994CLAP plunger for 994 injector

Valve seal 994CLAP for injector 994 1. Effective solution for repairing leaks Quick repair of leaks: This 994CLAP valve seal is designed to solve leak problems on the upper end of the 994 injector. By replacing this small black seal, you can eliminate leaks and ensure optimal operation of your injector. Increased reliability: By replacing the worn...

Reference: LUNETTE1048

UV protection glasses

When repairing windscreens, it is essential to wear UV protection goggles, especially when using UV LED lamps, such as our UV lamp 1048. These goggles provide optimal protection against ultraviolet rays, thus reducing the risks to the eyes and guaranteeing maximum safety. Characteristics: - Anti-UV filtration: Effective protection against UV exposure -...