Pompe à dépression-pression pour kit 1330SPECIAL et 1300

Reference: TER-CHARGEUR

Brand: TERMINATOR

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits. Connect the charger to your TERMINATOR or ULTRAPOSE EVOLUTION to recharge the battery.

Reference: HOS-2010

Rubber Seals (x2) for HOS-2000, HOS-2000-L, HOS-1000-T vacuum pump hoses

Set of 2 replacement seals compatible with HOS-2000, HOS-2000-L, and HOS-1000-T hoses, used with a vacuum pump for windshield repair. It is essential to replace the seals regularly to ensure optimal injection of the resin and prevent any leaks during the repair. The gasket is located inside the hose fittings. In the event of a leak, simply unscrew the...

Reference: 161

Brand: REPAREGLASS

Cigar lighter extension cable for battery

Extension cable for batteries. To put on the cigar lighter.

Reference: 5096

Brand: REPARBRISE

Large impact packer 5096 for 1330 and 1330SPECIAL kits

High-impact injector specially designed for kit ref. 1330 and kit ref. 1330SPECIAL. Ideal for repairing large impacts on windshields, this injector comes with a seal to ensure a perfect seal when injecting the resin. Not compatible with our old kit 1310.

Reference: FIX-2044

Brand: REPAR'VIT

Metal resin injector for FIX-2001 injection bridge

Metal injector specially designed for injecting windshield repair resin with the FIX-2001 injection bridge. Robust and precise, this injector allows for efficient distribution of the resin to ensure reliable and durable repairs to your automotive glass.

Reference: HOS-1000-T

2.50M vacuum pump connector hose for TERMINATOR 1 and 2 kits

Connection hose for vacuum pump, specially designed for the TERMINATOR 1 and 2 kits. This hose allows you to repair impacts on windscreens of commercial vehicles, trucks, buses, trams, and other vehicles requiring a long reach. Its length of 2.50 m offers optimal flexibility to easily reach repair areas, even on large windows.

Reference: DPG

Vacuum pump calibration tester for windshield repair

It's imperative to test the calibration of your vacuum pump at minimum once a year, to ensure quality repairs for your customers. French Standard regulation NF R61-980... Frequency of use: once a year. This new regulation allows to ensure that the pressure and vaccum cycles made from the pump are correct ( Pressure tolerance is 0,1 Bar) in order to avoid...

Reference: 994-N412

Brand: REPARBRISE

Injector for windshield repair resin injection for KIT-1320 - TER1 AND 2 - 2nd life - N412

In very good condition Only a few minor cosmetic defects - 1 Only one available 2nd LIFE warranty: 6 months Allows resin to be injected into impacts using a vacuum/pressure pump, ensuring precise and even application for high-quality repairs. Compatible with professional kits KIT-1320 and TERMINATOR 1 & 2, as well as with the vertical or inverted...

Reference: 538

Large format U.V. screen 30 x 40 cm - Protects windshield impact

Large-format 30 x 40 cm UV screen to protect against ultra-violet light during repairs. Used by the bus and truck industry.

Reference: 539-N39

Round UV screen Ø 9cm for deck 9620 - Impact protection - 2nd life

In average condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: FIX-2006

Brand: REPAR'VIT

Standard resin filler injector for REF -2000 bridge

Standard resin filling chamber specially designed for the REF-2000 injection bridge. It allows for efficient and controlled injection of resin during windshield repairs. Compatible with hose 996 Diameter: 0.9 cm.

Reference: 226

Ball for making impacts

The impact ball is an essential tool for training in windshield repair. Specially designed to create realistic impacts on a test windshield, it is ideal for: Training new technicians Practical exercises in training centers Your own training sessions A simple and effective tool for reproducing real-life situations and perfecting repair techniques before...

Reference: FIX-2005

Brand: REPAR'VIT

Large impact resin filler injector for REF -2000 bridge

High-impact resin filling injector specially designed for the REF-2000 injection bridge. Allows resin to be injected optimally into major impacts on windshields, ensuring high-quality repairs and good coverage of the damaged area. Compatible with the 996 hose Ø 1.5 cm.

Reference: 539

Round UV screen Ø 9cm for deck 9620 - Impact protection

Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: 977

Brand: REPARBRISE

Large format UV screen 30 x 20 cm - windshield impact protection

Large-format 30 x 20 cm UV screen to protect against ultra-violet light during repairs.

Reference: 993-N414

Brand: REPARBRISE

Pressure vacuum pump for REPAR'VIT Senior 1320 kit - -2nd LIFE - N414

Pump in good condition. Only a few cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Vacuum pump delivered with hose ref.996 (quick connector on injector side and direct connection on pump) The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air...

Reference: 5095-N377

Brand: REPARBRISE

Standard Injector 5095 for kit 1330 and 1330SPECIAL - 2nd life

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Standard injector designed for windshield repair kits ref. 1330 and 1330SPECIAL. This injector ensures precise resin injection for common impacts. It comes with a seal to guarantee a perfect seal during repair. Not compatible with the old kit...

Reference: PEZ-120

Anti-skid roof/hood liner

Protect the paintwork on your vehicle's roof or hood when you're working on it, with our non-slip protective canvas. Ideal for bodybuilders and garages, it offers a practical and safe solution for fitting tools, screws and small assembly equipment without the risk of damaging the vehicle's surface. Dimensions and weight : Dimensions: 1720 x 700 x 2 mm....

Reference: 945

Brand: REPARBRISE

Plexiglas mirror

The REPARBRISE 945 mirror, made of high-quality plexiglass, is designed to monitor the progress of windshield impact repairs in real time. Placed inside the vehicle, it provides a clear and continuous view of the impact throughout the repair process, ensuring precise and careful work.

Reference: 994JOINT

Brand: REPAREGLASS

Seal for 994CLAP plunger for 994 injector

Valve seal 994CLAP for injector 994 1. Effective solution for repairing leaks Quick repair of leaks: This 994CLAP valve seal is designed to solve leak problems on the upper end of the 994 injector. By replacing this small black seal, you can eliminate leaks and ensure optimal operation of your injector. Increased reliability: By replacing the worn...

Reference: 10357

Rechargeable battery-powered 7.2V carbide drill for impact drilling

Rechargeable 7.2V carbide drill, supplied with battery and charger, specially designed for drilling the impact point on your windscreen before injecting the resin. It is used with our 934, 4509w and 701 drill bits, ensuring precision and efficiency. This drill is also compatible with the polishing felt (ref. 971) for a perfect finish after repair....

Reference: 969

Long probe for impact repair

The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for efficient and controlled repairs.

Reference: 969-N374

Large probe for impact repair - 2nd LIFE - N374

In average condition Cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: 969-N368

Large probe for impact repair - 2nd LIFE - N368

Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: IFA-300

Infrared thermometer for glass temperature control

Discover our infrared thermometer, a quick and accurate tool for monitoring temperatures on your windscreen. Ideal for checking conditions before and after repairs, it ensures optimal and safe working conditions.

Reference: 959

Brand: REPARBRISE

Carbide tip pen for removal of impurities from windshield impact

The carbide-tipped pen is the ideal tool for effectively preparing an impact area prior to repair. It allows you to precisely remove surface impurities, ensuring optimal resin adhesion and a long-lasting repair. Essential for guaranteeing a clean, professional finish on damaged windshields.

Reference: 996

Brand: REPARBRISE

1M hydraulic connection hose for 993 pump

Connection hose with female quick connector (on one side only), specially designed to fit only on the 993 vacuum pump and the 994 injector. This 1-meter hose ensures a secure and efficient connection for your windshield repair operations, facilitating resin suction and injection with perfect compatibility between your equipment.

Reference: 5095

Brand: REPARBRISE

Standard injector 5095 for kit 1330 and 1330SPECIAL

Standard injector designed for windshield repair kits ref. 1330 and 1330SPECIAL. This injector ensures precise resin injection for common impacts. It comes with a seal to guarantee a perfect seal during repair. Not compatible with the old kit ref. 1310.

Reference: 272

Spreader bar for windshield crack repairs

This tension bar is specially designed to hold the crack in place during repair and provides optimal adhesion throughout the process. Ideal for professionals and specialized workshops, this product allows for careful and safe work on cracks or chips in the windshield.

Reference: FLEXI-BLADE

Flexible silicone wiper blade for windows and bodywork

Flexible wiper blade made in silicone. Allow to ease the removal of the water from surface to be dried. Appliable on the glass and metal.