Gants latex légèrement poudrés

Reference: BOB-CHAM

Cleaning paper made of cellulose wadding (2 rolls of 1000 sheets)

  Wadding cleaning paper PEFC certification, PEFC Label.     Suitable for food contact     Controlled consumption thanks to sheet-by-sheet distribution.     Sheet dimensions: 340 x 257 mm - perforated.     Roll length: 350 m     Diameter of the roll: 30 cm     Grammage: 2 x 19g/m².     Pack of two rolls of 1000 sheets = 2000 sheets Sold in sets of 2...

Reference: 6200OR

Pre-cut glazing protection tape - adhesive only on edges

Orange adhesive tape designed to protect glazing edges from damage during transport. The central part of the tape has no adhesive. This makes it easier to apply to curved glass. It is also very easy to remove.

Reference: HP564

Clear headliner protector

Reference: SHM-108

High protection knitted gloves - Size M

Knitted gloves made of cotton and nylon, very strong and comfortable to wear, for optimum grip. Hands are protected thanks to the coating and traction points inside the glove. Good sensitivity combined with high cut protection. Size M Also available in L and XL (SHL-109 and SHX-110)

Reference: CEJYB-10

10kg box of 100% cotton jersey cloths - ultra absorbent

Ultra-absorbent fabric Textile recycling, garment container Made from undershirts, T-shirts and other types of fabric white jersey 100% cotton

Reference: FZS-128

Large PVC hood protection covered with foam.

HOOD PROTECTION - 1400 x 1840 mm Several sizes available: FENDER PROTECTION: Suitable for fender protection - 1400 x 800 mm FRONT PROTECTION: Suitable for front panel protection - 1900 x 700 mm CUSTOM DESIGN: Contact us Can also be made to measure on request for glazing, lorries, buses, underground railways, public works, etc.

Reference: CEB-10

10kg box of white polyester cotton woven cloths

Polycotton cloth  Textile recycling, garment container Made from shirt- or sheet-type fabrics..... mostly white or slightly unbleached polycotton

Reference: RUBAN-ADHESIF

Double-sided adhesive tape (6-12-19-25mm x 10ml)

This high-quality double-sided adhesive tape is the ideal tool for automotive professionals, designed specifically for bonding exterior and interior vehicle components. Perfect for attaching decorative trim, emblems, monograms, bumper beads, gaskets and other accessories, it offers a powerful, long-lasting bond that stands up to the demanding conditions...

Reference: PTB-SCUT

Flexible Dashboard protection

Reference: GEAR-500

Gearshift protection (500-speed gearbox)

Protect your gearshift levers during repair work with our dedicated cover, specially designed for automotive professionals. Practical and easy to install, this cover effectively protects the gearshift from dirt, oil and scratches, ensuring a clean and tidy workspace. Made from hard-wearing, non-slip material, this cover is designed for intensive use in...

Reference: BDA-251

Footloose Rubber Gasket Release Tool

Reference: VENT-6030

Paire of suction cup for Dashboard protection PTB-6030

Reference: TSP-292

Protective foam for bodywork (set of 2)

Some places, like garage parking lots or workshops, have cars parked very close together, where it's not possible to move them. These protectors are made from dense rubberized foam on one side, and a small, flexible suction pad on the other. Neither side damages the vehicle. You can leave the door open in this direction during glazing operations.

Reference: PTB

HDPE” standard dashboard protector

Avoids snagging the dashboard with the piano wire during cutting Move everything along the path of your piano wire

Reference: PEZ-120

Anti-skid roof/hood liner

Protect the paintwork on your vehicle's roof or hood when you're working on it, with our non-slip protective canvas. Ideal for bodybuilders and garages, it offers a practical and safe solution for fitting tools, screws and small assembly equipment without the risk of damaging the vehicle's surface. Dimensions and weight : Dimensions: 1720 x 700 x 2 mm....

Reference: ISH-691

Handle for instalation stick

Reference: SB-880

Impact-resistant safety goggles

Safety glasses It is absolutely essential to wear protective eyewear when working with glass. Our impact-resistant goggles can be conveniently worn over most glasses. The avant-garde shape of our goggles protects your eyes laterally and frontally.

Reference: 6200

Reinforced black fibrous adhesive tape 50mm

For protection of all sensitive surfaces (mudguards, hood corners or headlining during windscreen cutting)! Adhesive tape is also very effective for securing windows that have just been installed, preventing them from sliding down after installation.

Reference: ATP5

Transparent adhesive tape for repositioning your Toll PASS or Navigation device

Transparent adhesive tape for repositioning your Toll PASS or Navigation device after replacement of the windshield.  Cut to the required length. Roll size. Width: 12.7 mm - Length 5M Supplied without fixing and without PASS

Reference: 433

Hand cleansing soap - cleansing gel with vegetable microbeads.

Vegetable cream cleansing soap based on natural vegetable oils. Creamy, silicone-free, solvent-free, alkali-free hand cleaner. For removal of water-based and oil-based paints, glue, lacquers, resins, grease, etc. Skin-friendly natural vegetable oil. The vegetable fillers (crushed olive stones) are totally biodegradable, respecting the environment. Its...

Reference: LUNETTE1048

UV protection glasses

UV protection glasses It is absolutely essential to wear protective glasses during windshield repairs when using our LED UV lamps, for example our UV lamp 1048.

Reference: LING-80

Cleaning wipes for putty, glue, resin...

LING-80 is ideal for bodywork, carpentry and public works on all surfaces.LING-80 is a wipe specially developed for professionals to remove traces and deposits of :- windshield bonding putty- aluminum or PVC joinery assembly glue- bitumen stainsLING-80 is gentle on hands. It is impregnated with a plant-based product.

Reference: 6200BLU

Glazing protection tape - sticks to edges only

Blue adhesive tape designed to protect glazing edges from damage during transport. The central part of the tape has no adhesive. This makes it easier to apply to curved glass. It is also very easy to remove.

Reference: TAP-C0V2

Insulating blanket for electrical work - CLASS 0

The insulating fleece protects against electrical hazards and insulates the operator against electric shocks from appliances such as electric cars... For use in dry environments only Supplied with 4 magnets to hold the cloth in place without damaging the bodywork. Advantages Lightweight Easy to clean

Reference: 770

Brand: REPARBRISE

Window / windshield cleaner 20L - Mosquito repellent -770

Eliminates traces of oil, insects and dust. Used in industry, cars and construction. For cleaning windshields, windows and outside mirrors. Sold in 20L drums Also available - 750ml aerosol - Ref.768 and 5L drum - Ref.769

Reference: MICRO-CARBON

Carbon fiber microfiber - glass cleaning - pack of 5

Discover our carbon fiber microfiber, specially designed for impeccable window cleaning without leaving streaks or residues. Thanks to advanced carbon fiber technology, this ultra-soft microfiber easily picks up dust, dirt and fingerprints, while eliminating traces of water and cleaning products. Washable and reusable, it offers long-lasting performance...

Reference: BLACKNIT

Black protective nitrile gloves (powder-free), thick, special for various repairs

Give your hands optimum protection with our powder-free black nitrile gloves, designed for professional, all-purpose use. Recommendations for use : Store in a cool, dry place, away from excessive heat (maximum temperature: 40°C). Open tin to be protected from UV rays and direct exposure to sunlight. Packaging: Sold in boxes of 100 pieces, ideal for...

Reference: CC-1058

NITRILE elastic and stretch gloves (NON-POINTED)

Raw material: Nitrile rubber. Does not contain natural rubberized latex. The components used to manufacture gloves may cause allergic reactions in some users. Good quality nitrile gloves providing an excellent biological barrier. Store in a cool, dry place, avoiding excessive heat (40°C, 104°F). Open box must be protected from direct sunlight and UV...

Reference: DIST1-SAV-DESTOCK

Soap dispenser with push extraction - 1Kg

this push-pull soap dispenser offers a hygienic and robust solution for hand care in the workshop. Thanks to its push-button mechanism, it provides precise, controlled soap dispensing, ideal for hands often exposed to grease, oil and other mechanical products. Made from a material resistant to demanding environments, it fits perfectly into wash stations...

Reference: MS-182

Installation stick with one round end shape and one flat end shape