Paire de ventouses VERIBOR - diam.120cm

Reference: 9005B

Dent suction cup

Dent suction cup. Grips very well on any surface (car body, glass, hood–).- Diameter: 115mm- Load capacity: 40kg- Sold individually

More

Reference: RL-1382

SUCTION CUP OF MAINTENANCE OF windshield

Windshields adjustment suction cupStops the windshield in the correct place. ere is a simple solution to one ofthe most annoying problems a technician faces today.When a vehicle does not have stops it is difficult for one person to set thewindshield because he does not have anything to set it on.Here is the solution, before removing the old windshield put...

More

Reference: PSL-150-1

Suction cup deluxe sold individualy (Ø 150 mm)

Suction cup deluxe sold individualy (Ø 150 mm)Easier and safer to attach that common suction lifters with clamp lever technology.The bell shaped rubber pads already adhere onto the glass surface with slight pressing even before pressing the lever.Possibility to pass a belt through. Load capacity for each lifter is 80 kg.

More

Reference: VP-205-N347

Piston Suction Cup – Diameter 205 mm – Lifting Capacity 260 kg - Second Life - N347

Suction cup in good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months SOLD INDIVIDUALLY – DELIVERED IN A CARRYING CASE This piston suction cup, with a 205 mm diameter, is specifically designed for heavy-duty lifting and handling. Its piston mechanism...

More

Reference: VP-230-N326

Piston Suction Cup Ø 230 mm – Lifting Capacity 380 kg - Second Life - N326

In very good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting...

More

Reference: VP-230SPECIALE-N337

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N337

In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...

More

Reference: VP-230-N320

Piston Suction Cup Ø 230 mm – Lifting Capacity 380 kg - Second Life - N320

In very good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting...

More

Reference: VP-230SPECIALE-N338

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N338

In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...

More

Reference: GEZ-543-1-N343

Piston Suction Cups – Diameter 150 mm -load capacity 62kg – 2nd VIE – N343

Suction cup in good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months This piston suction cup is specially designed for installing and removing automotive glass. Its ergonomic handle ensures a secure and comfortable grip, even when handling large glass...

More

Reference: GEZ-543-1-N344

Piston Suction Cups – Diameter 150 mm -load capacity 62kg – 2nd VIE – N344

Suction cup in good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months This piston suction cup is specially designed for installing and removing automotive glass. Its ergonomic handle ensures a secure and comfortable grip, even when handling large glass...

More

Reference: KIT-VP-230-E

Electric suction cup kit - Diameter 200mm

KIT consisting of a suction cup (REF.VP-230), 2 lithium batteries 3W- 3.7V (REF.VP-230-E-BAT) and a charger (REF.VP-230-E-CHARG). Diameter: 200mm, Flat suction cup, cannot be used on curved glass. Ideal for flat windscreens such as lorries, buses, etc. Standard suction= 160kg Maximum vertical suction = 180 kg Maximum horizontal suction= 200 kg Charger and...

More

Reference: VP-230-N317

Piston Suction Cup Ø 230 mm – Lifting Capacity 380 kg - Second Life - N317

In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting power,...

More

Reference: VP-230-N318

Piston Suction Cup Ø 230 mm – Lifting Capacity 380 kg - Second Life - N318

In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting power,...

More

Reference: VP-230

Piston Suction Cup Ø 230 mm – Lifting Capacity 380 kg

Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting power, grip, and durability. Whether you're transporting bus windshields, curved glazing panels, or large flat glass, this suction cup...

More

Reference: GEZ-543-1-N342

Piston Suction Cups – Diameter 150 mm -load capacity 62kg – 2nd VIE – N342

Suction cup in good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months This piston suction cup is specially designed for installing and removing automotive glass. Its ergonomic handle ensures a secure and comfortable grip, even when handling large glass...

More

Reference: RL-170

Suction cup with handle diameter 70 mm

Suction cup with handle diameter 70 mmDurable quality suction cup. Adaptable on glass, marble, ceramic.Ideal to remove and install quarter glass.Loading capacity : 12 kgREF. RL-170Sold individually

More

Reference: PSH-120

Pair of suction cups - Load capacity: around 80kg

Pairof suction cups (Ø 120 mm)Vacuum cups allow you to hold safely a window that is ready to install. The edge of the window must not be touched once the window is ready for the installation. Each vacuum swivels up and down approximately 30° to fit radically contoured glass. Simply set the vacuum cups in place and push the thumb latches down to engage the...

More

Reference: PSH-125-DESTOCK

Pair of suction cups for flat windshields - Load capacity: 40 kg - Destock

Only 65 units in stock Pair of suction cups. The suction cups allow you to lift a flat glass pane ready for installation safely. Simply place the suction cups on the glass and press the levers down to create a vacuum. The glass pane can now be transported safely. Please note that these suction cups have been developed for a load capacity of: 40 kg...

More

Reference: VP-230SPECIALE-N329

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N329

In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...

More

Reference: GEZ-543-1-N341

Piston Suction Cups – Diameter 150 mm -load capacity 62kg – 2nd VIE – N341

Suction cup in good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months This piston suction cup is specially designed for installing and removing automotive glass. Its ergonomic handle ensures a secure and comfortable grip, even when handling large glass...

More

Reference: VP-230SPECIALE

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield

Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus windshields. Its built-in manual piston efficiently creates a vacuum, ensuring strong adhesion even on complex or curved surfaces. The...

More

Reference: PRP21-OCCASION

OCCASION Piston automatique - Equalizer Powerpump

OCCASION AUTOMATIC PISTON - Used for our customer demonstrations. Only one piston available Replaces the manual plunger, automatically sucks in the suction cup when the button is pressed, can be used manually if the battery is flat. 5-hour autonomy Supplied with USB-C charging cable Fits ULTRAPOSE1, ULTRAPOSE3, VP-230 and VP-230SPECIALE

More

Reference: GEZ-543-1-N345

Piston Suction Cups – Diameter 150 mm -load capacity 62kg – 2nd VIE – N345

Suction cup in good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months This piston suction cup is specially designed for installing and removing automotive glass. Its ergonomic handle ensures a secure and comfortable grip, even when handling large glass...

More

Reference: VSP-290

Pair of Suction Cups for Side Windows

his pair of suction cups is designed to hold the side window in the desired position during removal or adjustment operations. It allows the technician to work safely while keeping both hands free. Simply pass the tool cable over the vehicle door and attach the two suction cups to each side of the glass to ensure stable and reliable support throughout the...

More

Reference: VP-230-N325

Piston Suction Cup Ø 230 mm – Lifting Capacity 380 kg - Second Life - N325

In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting power,...

More

Reference: VP-230-N322

Piston Suction Cup Ø 230 mm – Lifting Capacity 380 kg - Second Life - N322

In very good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting...

More

Reference: PE24

Automatic plunger for suction cup

All you have to do to replace a manual piston is remove the manual piston and replace it with the PE24, then press the button to start the suction cup vacuum, which operates automatically. If your battery is discharged, the plunger can also be used manually. Power rating: 3.7v Charging time: 2h30 Battery life: 4 hours Supplied with USB-C charging cable...

More

Reference: VP-205-N353

Piston Suction Cup – Diameter 205 mm – Lifting Capacity 260 kg - Second Life - N353

Suction cup in very good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months SOLD INDIVIDUALLY – DELIVERED IN A CARRYING CASE This piston suction cup, with a 205 mm diameter, is specifically designed for heavy-duty lifting and handling. Its piston...

More

Reference: VP-230-N319

Piston Suction Cup Ø 230 mm – Lifting Capacity 380 kg - Second Life - N319

In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting power,...

More

Reference: VP-230SPECIALE-N334

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N334

Average condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...

More