Lame pour coupe à froid, emboutie à froid 19 mm À l'unité

Reference: ZAW-120

Windshield wiper arm removal tool

Extremely loadable. Made of massive metal. Can be used on virtually any passenger and commercial vehicle. Specially recommended for the BMW 5 and BMW 7 series.- 104 x 38 x 140 mm- 518 g

Reference: KFS-300

Scraper kit in plastic case

Reference: CM-536

Magnetic bowl

Magnetic bowlThe bowl can be placed almost everywhere on a vehicule because the bottom has a rubber cover to avoid scratches. The strong magnet surely holds thebowl itself and all magnetic content.Diameter:140 mm

Reference: JCS452

Compact C-clip remover

Compact C-clip removerC-clip removers are an item that every technician has inhis toolbox, but those C-clips removers will not alwaysfit into the tight spots and compound curves on somevehicles. The Compact C-clips remover has a flat designthat will let you use it from all sides. This handy tool isdefinitely one that no technician should be without.REF....

Reference: DSS-175

One-man wire cut-out tool

One-man wire cut-out toolREPAREGLASSOne-man wire cut-out toolThis tool acts like another person sitting inside the vehicle pulling the wire back after you havemade your cutting stroke.Attached to the swivel is a spring that acts as a second person; you pull the wire out to make your cut and the springs pulls the wire back in. The spring is attached to a...

Reference: FB073

FEIN cutting blade, straight 35 mm

FEIN cutting blade, straight 35 mm (56 mm 12 g)

Reference: CHARG-FSC1.7

FEIN battery knife charger

Ensure fast, efficient recharging of your FEIN 18V batteries with this charger specially designed to meet the needs of professionals. Key features: Optimum compatibility: Compatible with FEIN 18V batteries RÉF. BAT18-FSC1.7 Fast charging: Reduces waiting time for continuous work without prolonged interruptions. Advanced charging technology: Protects your...

Reference: PSD12

Parer blades diam.12mm

Parer blades (scraper not include) REF-PSD-12 Blade diameter 12 mThese parer blades are especially good for cleaning the pinchweldfrom excessively applied polyurethane in curves and corners.Thereby the special shape reduces the risk of damaging the paintcompared to standard scraper blades. The blades are suitable for ourscraper tools FSC-300SPECIAL and...

Reference: Z3

Cold knife blade 38 mm

Cold knife blade, extra fine- Sold individually- Cutting length: 38 mm- 20 gCARTON OF 10

Reference: BOB-1.5-ROLL-OUT

Spool of 1.5km for roll-out 2000

Spool  of 1.5km - Round wire: 0.8 mm

Reference: AIG-789

Straight wire threader

Many technicians remove windshields by starting the wire through the top and bottom center of the windshield, then cutting towards each side. So as to push the cutting wire into the urethane, especially where there is a wide surface of urethane, we recommend using the wire threader. The slot (1,2 mm only) and the cutting wire are pushed together into the...

Reference: WK4ZRS

Serrated inverted deep offset BTB blade, 140mm

Serrated inverted deep offset BTB blade, 140mm

Reference: XKD-44A

Square piano wire for windshield cutting - 0.7 x 0.7 mm - 44ML

Discover our new REF-XKD-44 square piano wire, designed to offer exceptional strength and meet the most demanding needs. Applications: Used for precise cutting of windscreens and automotive glazing, this rope is a must-have for bodybuilders and garages. Its sturdy, square design ensures a firm grip and greater efficiency when removing glass and similar...

Reference: WK1S

Serrated, long, flat BTB blade, 300mm

Serrated, long, flat BTB blade, 300mm

Reference: CS-696

Clipsaver door upholstery remover

EQUALIZER® ClipSaver door upholstery remover The front of the tool is tapered so it will fit easily under a clip. Spread the jaws slightly so they will go under and around the clip. Then, close the jaws and it removes the clip without damaging it. Great for the removal of door panels. - 230 x 76 x 51 mm - 205 g

Reference: H1

Long Olfa®

Olfa® knifeKnife with a snap-off blade, 25 mm and 0,7 mm wide.The blade can be outside its housing up to a length of 10 cm and a thumb locking screw allows you to lock the blade in any position.Back of the knife features a rubber grip that lets the knife rest comfortably in your hand and keeps it from slipping.- 172 x 34 x 25 mm - 155 g

Reference: LFA-402

Flexlight bulb

flexlight mini torch with flexible shaftA screw has been lost? There is a leak in the engine compartment? A connector is hidden under the dash? This mini torch with flexible shaft will give you the needed light-in dark or hidden places. It can even become one of the most useful tools to you. Needs two LR6/AM3/AA batteries (delivered without batteries ).-...

Reference: MTS-068

Hook and pick set

Hook and pick setThis set of mini hooks is very helpful to remove joints and coverings while avoiding any possible damage.This practical set contains hooks in different shapes and a pick. The length of these tools is only 13mm! - 127 x 25 x 25 mm - 280 g

Reference: VKD-44A

Brand: REPAREGLASS

SQUARED CUTTING WIRE in a spool- Size: 0.6mm - 44 ML

SQUARED CUTTING WIRE in a spool REPAREGLASS Surprising but true! The cutting resistance of the squared wire is far higher than the one of the common round wire. Try it, you will see!Squared wire - 0,6 x 0,6 mm,- length: 44m, on plastic spool.- 100 x 22 mm - 110 g

Reference: SK120

Replacement blade for fsl 240 pinchweld scraper l:13mm

Replacement blade for fsl 240 pinchweld scraper 13mm wide

Reference: 51857

U shape 38 mm Equalizer cutting blade

REF. 51857U shape 38 mm Equalizer cutting blade

Reference: FB154

Hook blade with U shape- 45 mm

REF-FB-154 Lame à crochet en U Profondeur de coupe 45 mmvendue à l’unité

Reference: TKS-100

Trapezoid blades

Trapezoid blades. In a pratical dispenser. Our replacement blades for utility knives are 0,6 mm thick, so they are very sturdy. These blades are in a safety dispenser with a suspension hook so as to avoid any risk of injury. You take new blades by sliding them out from the above side of the dispenser while youdispose of the worn out blades by sliding them...

Reference: DESTOCK-WK7L

Double manual handle for BTB blades

Double handle for BTB blade - Makes it easy to cut windshield and other glazing seals. Dimensions: 190 x 38 x 38 mm

Reference: OL30

Olfa®knife, with one snap-off blade of 9mm

Olfa® knife, with one snap-off blade of 9 mm.Standard knives with a wide 18 mm blade are generally too wide to accomplish fine jobs. With its retractable blade of 9 mm wide, this knife allows a fine cutting with one hand.- 130 x 16 x 10 mm - 36 g

Reference: DST-734BUS

T-handle wire threader special bus and trucks

Special wire threader for bus and trucks with 2 holes ( for square or braided wire and nylon wire.) The end of the needle has a special designed in order to introduce easy the wire through the urethane. Push it in the urethane, insert the wire inside the tube, remove the wire threader and lead the wire throughout the urethane, in order to be able to pic...

Reference: WK2

Average, universal, flat BTB blade, 240mm

Average, universal, flat BTB blade, 240mm

Reference: CZ-444

Clip removal tool

Reference: TE-125

Torx t80 for arms of windshield pullers

This very wide piece is recommended for windshield removal on the BMW 5 and BMW 7 series.- 35 x 18 x 18 mm - 38 g

Reference: RMI-309

Rearview Mirror Installer

Rearview Mirror Installer Use to install spring-loaded rearview mirrors with easy Spring-loaded rearview mirrors are designed to detach from the windshield when hit by the air bag.  The Rearview Mirror Mounting Tool makes the job easy and reducing the risk of breaking the windshield.  To use: Set the upper jaw against the rearview mirror, put the nylon...