Adaptateur gros impacts pare-brise

Reference: 272

Spreader bar for windshield crack repairs

This tension bar is specially designed to hold the crack in place during repair and provides optimal adhesion throughout the process. Ideal for professionals and specialized workshops, this product allows for careful and safe work on cracks or chips in the windshield.

Reference: HOS-2001

Nylon cleaning brush for HOS-2000 hose

Nylon cleaning brush specially designed for the HOS-2000 connection hose. It effectively removes excess resin used during windscreen repairs, ensuring optimal maintenance of your equipment and increased longevity of your connection hoses.

Reference: RS-2030

Set of 5 special syringes for resin injection

The RS-2030 pack consists of 5 syringes and 3 needles, ideal for windshield repair professionals. Each syringe allows you to draw the injection resin directly from a bottle or pipette and then inject it precisely into the injector. You can also use them to plug drill holes or fill cracks in your automotive glass. A practical and economical set, designed...

Reference: 3200

Brand: REPARBRISE

Cylinder + piston for injection of windshield repair resin

Composed of 5 lips, it allows for greater vacuum and therefore faster repair of impacts on windshields. This cylinder + piston is compatible with injection bridges ref. 51 and 9620, as well as with tube ref. 996. To ensure optimal sealing and prevent any leaks due to wear on the seal, it is strongly recommended to order the interchangeable end caps ref....

Reference: 539-N39

Round UV screen Ø 9cm for deck 9620 - Impact protection - 2nd life

In average condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: FLEXI-BLADE

Flexible silicone wiper blade for windows and bodywork

Flexible wiper blade made in silicone. Allow to ease the removal of the water from surface to be dried. Appliable on the glass and metal.

Reference: 818

Windshield heater for impact repair

The WINDSHIELD HEATER warms the repair area, usb powered, supplied with adapter + 5 thermometers Ref. 961 12v cigarette lighter and 220v mains, 2.5m cable, ideal for impact repairs, red or black depending on availability.

Reference: 945

Brand: REPARBRISE

Plexiglas mirror

The REPARBRISE 945 mirror, made of high-quality plexiglass, is designed to monitor the progress of windshield impact repairs in real time. Placed inside the vehicle, it provides a clear and continuous view of the impact throughout the repair process, ensuring precise and careful work.

Reference: FIX-2044

Brand: REPAR'VIT

Metal resin injector for FIX-2001 injection bridge

Metal injector specially designed for injecting windshield repair resin with the FIX-2001 injection bridge. Robust and precise, this injector allows for efficient distribution of the resin to ensure reliable and durable repairs to your automotive glass.

Reference: 983

Brand: REPARBRISE

Seals (X2) for large impact adapter 946

These 2 seals are specially designed for the 946 heavy-duty impact adapter. It is essential to replace them regularly to ensure optimal sealing when injecting windshield repair resin. A seal in good condition ensures effective repair and reduces the risk of leakage.

Reference: 969

Long probe for impact repair

The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for efficient and controlled repairs.

Reference: 1110

Brand: REPAR'VIT

Vacuum-pressure pump for REPAR'VIT 1330 kit

The 1110 vacuum-pressure pump is specially designed to facilitate the repair of impacts on your windshield. It creates a vacuum, which helps to remove air and impurities from the impact area before the resin is injected. Alternating vacuum and pressure with your pump ensures uniform and effective injection of the resin into the impact, guaranteeing a...

Reference: 5BX-02010

Rubber seals Ø 1.5 cm for large impact injector 5096 and FIX-2005

Pack of 5 seals, Ø 1.5 cm, compatible with 5096 and FIX-2005 heavy-duty impact injectors, specially designed for repairing windshield impacts. It is essential to replace the seals regularly to ensure a perfect seal when injecting the resin, thus guaranteeing a reliable and durable repair.

Reference: 995

Brand: REPARBRISE

Seal for Injector 994 - windshield impact repair

Injector seal 994 provides a homogeneous seal for resin injection into the impact during windshield repair. 1. Homogeneous seal for precise injection Optimised sealing quality: This injector seal 994 provides a perfect seal, guaranteeing uniform and precise injection of the resin into the impact. This results in more effective and higher-quality...

Reference: HOS-2000

1M connector hose for 1110 pump and PMP-ADVANTAGE

Discover our specially designed connection hose for the 1110 vacuum pump and the PMP-ADVANTAGE, as well as for the 5095 or 5096 injectors used for windscreen repairs. With a length of 1 meter, it provides a reliable and convenient connection between your pump and the injector, making your work easier and ensuring optimal use of your equipment.

Reference: 3202

Brand: REPARBRISE

Exchangeable nozzles for REPARBRISE 3200 injector (pack of 5)

This set of 5 interchangeable tips is specially designed for the REPARBRISE 3200 injector. When repairing windshields, uniform sealing is essential to ensure effective injection of the resin without leakage. That is why it is recommended to replace the nozzle tip of the 3200 injector as soon as it shows signs of wear. These nozzle tips ensure optimal...

Reference: 539

Round UV screen Ø 9cm for deck 9620 - Impact protection

Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: ADAPT-PBV

Adapter for vertical or reverse glazing

ADAPTER FOR VERTICAL OR INVERTED GLAZING Truck, bus, tractor, public works, combine harvester type.... The adaptor enables repairs to be carried out on vertical windscreens with a negative tilt of up to 20°. For use with injector 994, our 9620 bridge for TERMINATOR 1 and 2 cases, and 1320. Not compatible with FIX-2001, 2000, 367 and 51 bridges, cannot be...

Reference: PMP-ADVANTAGE

Brand: REPAR'VIT

Vacuum-pressure pump for kit 1330SPECIAL and 1300

The vacuum-pressure pump is specially designed to facilitate the repair of impacts on your windshield. It creates a vacuum to suck out air and impurities from the impact area before the resin is injected. Thanks to alternating vacuum and pressure, this pump ensures uniform and controlled injection of the resin into the impact area, guaranteeing a...

Reference: 538

Large format U.V. screen 30 x 40 cm - Protects windshield impact

Large-format 30 x 40 cm UV screen to protect against ultra-violet light during repairs. Used by the bus and truck industry.

Reference: LP10

Magnifying glass (15x zoom) for viewing windshield impact damage

Plastic magnifying glass (15x zoom) with transparent base. Excellent tool for identifying the type of impact, but also for viewing the impurities contained within it.

Reference: PEZ-120

Anti-skid roof/hood liner

Protect the paintwork on your vehicle's roof or hood when you're working on it, with our non-slip protective canvas. Ideal for bodybuilders and garages, it offers a practical and safe solution for fitting tools, screws and small assembly equipment without the risk of damaging the vehicle's surface. Dimensions and weight : Dimensions: 1720 x 700 x 2 mm....

Reference: 931

Brand: REPARBRISE

Single 135 mm UV neon for 1046 and UVB-150 lamp

Single U.V. neon 135 mm - 931- for 1046 and UVB-150 lamp 

Reference: 969-N369

Large probe for impact repair - 2nd LIFE - N369

Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: 768

Foam window / windshield cleaner 768 - Mosquito repellent

Effectively remove traces of oil, insects and dust with the foam-based 768 glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...

Reference: 996

Brand: REPARBRISE

1M hydraulic connection hose for 993 pump

Connection hose with female quick connector (on one side only), specially designed to fit only on the 993 vacuum pump and the 994 injector. This 1-meter hose ensures a secure and efficient connection for your windshield repair operations, facilitating resin suction and injection with perfect compatibility between your equipment.

Reference: 959

Brand: REPARBRISE

Carbide tip pen for removal of impurities from windshield impact

The carbide-tipped pen is the ideal tool for effectively preparing an impact area prior to repair. It allows you to precisely remove surface impurities, ensuring optimal resin adhesion and a long-lasting repair. Essential for guaranteeing a clean, professional finish on damaged windshields.

Reference: 994

Brand: REPARBRISE

Injector for windshield repair resin for KIT-1320 - TERMINATOR 1 AND 2

Injector nozzle for applying windscreen repair resin using a vacuum/pressure pump. 1. Injection performance and precision Efficient resin injection: This nozzle is specially designed for applying repair resin to windscreen impacts using a vacuum/pressure pump. This technology allows for precise and even injection, guaranteeing a high-quality repair....

Reference: 961

Brand: REPARBRISE

Thermometer strip for windshield

Discover our thermometer specially designed for taking the temperature of the windshield before intervention, with a measuring range of 8 to 34°C. This tool allows you to accurately measure the temperature of the glass before any operation, ensuring ideal conditions for efficient and safe repairs.

Reference: 993-N414

Brand: REPARBRISE

Pressure vacuum pump for REPAR'VIT Senior 1320 kit - -2nd LIFE - N414

Pump in good condition. Only a few cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Vacuum pump delivered with hose ref.996 (quick connector on injector side and direct connection on pump) The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air...