Injecteur Standard 5095 pour kit 1330 et 1330SPECIAL - 2nd vie- N377

Reference: 993

Brand: REPARBRISE

Pressure vacuum pump for REPAR'VIT Senior 1320 kit

The vacuum/pressure pump is an essential tool for optimizing windshield impact repairs. Supplied with its hose ref. 996, it provides a quick and efficient connection between the injector and the pump, making it easy to use. It creates a vacuum to suck out air and impurities from the impact area before the resin is injected. By alternating between vacuum...

Reference: ADAPT-PBV

Adapter for vertical or reverse glazing

ADAPTER FOR VERTICAL OR INVERTED GLAZING Truck, bus, tractor, public works, combine harvester type.... The adaptor enables repairs to be carried out on vertical windscreens with a negative tilt of up to 20°. For use with injector 994, our 9620 bridge for TERMINATOR 1 and 2 cases, and 1320. Not compatible with FIX-2001, 2000, 367 and 51 bridges, cannot be...

Reference: 5BX-2016

Ø 0.9 cm Rubber seals for standard impact injector 5095 and FIX-2006

Ø 0.9 cm rubber seals for large impact injector 5095 and FIX-2006. It is important to change the seals regularly to ensure a good seal when injecting windshield repair resin. 1 bag of 5 pieces

Reference: LUNETTE1048

UV protection glasses

When repairing windscreens, it is essential to wear UV protection goggles, especially when using UV LED lamps, such as our UV lamp 1048. These goggles provide optimal protection against ultraviolet rays, thus reducing the risks to the eyes and guaranteeing maximum safety. Characteristics: - Anti-UV filtration: Effective protection against UV exposure -...

Reference: 617

Cylinder vacuum nozzle

The cylinder vacuum nozzle is specially designed to remove air trapped in the impact on your windshield before injecting the resin. It comes with a specific hose without a connector and with a smaller diameter, suitable for precise and efficient work. This nozzle is for exclusive use with the 3200 cylinder and the 993 vacuum pump, ensuring optimal suction...

Reference: 993-N414

Brand: REPARBRISE

Pressure vacuum pump for REPAR'VIT Senior 1320 kit - -2nd LIFE - N414

Pump in good condition. Only a few cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Vacuum pump delivered with hose ref.996 (quick connector on injector side and direct connection on pump) The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air...

Reference: 969-N367

Large probe for impact repair - 2nd LIFE - N367

Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: HOS-2010

Rubber Seals (x2) for HOS-2000, HOS-2000-L, HOS-1000-T vacuum pump hoses

Set of 2 replacement seals compatible with HOS-2000, HOS-2000-L, and HOS-1000-T hoses, used with a vacuum pump for windshield repair. It is essential to replace the seals regularly to ensure optimal injection of the resin and prevent any leaks during the repair. The gasket is located inside the hose fittings. In the event of a leak, simply unscrew the...

Reference: 499

Cigar-lighter multi-socket box

Cigar-lighter power strip. Allows you to recharge appliances such as UV lamps, drills, hoovers, etc. Ideal for buses and trucks.

Reference: HOS-2000

1M connector hose for 1110 pump and PMP-ADVANTAGE

Discover our specially designed connection hose for the 1110 vacuum pump and the PMP-ADVANTAGE, as well as for the 5095 or 5096 injectors used for windscreen repairs. With a length of 1 meter, it provides a reliable and convenient connection between your pump and the injector, making your work easier and ensuring optimal use of your equipment.

Reference: 995

Brand: REPARBRISE

Seal for Injector 994 - windshield impact repair

Injector seal 994 provides a homogeneous seal for resin injection into the impact during windshield repair. 1. Homogeneous seal for precise injection Optimised sealing quality: This injector seal 994 provides a perfect seal, guaranteeing uniform and precise injection of the resin into the impact. This results in more effective and higher-quality...

Reference: 539-N40

Round UV screen Ø 9cm for deck 9620 - Impact protection - 2nd life

In average condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: FIX-2006

Brand: REPAR'VIT

Standard resin filler injector for REF -2000 bridge

Standard resin filling chamber specially designed for the REF-2000 injection bridge. It allows for efficient and controlled injection of resin during windshield repairs. Compatible with hose 996 Diameter: 0.9 cm.

Reference: 969-N372

Large probe for impact repair - 2nd LIFE - N372

Very Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: 983

Brand: REPARBRISE

Seals (X2) for large impact adapter 946

These 2 seals are specially designed for the 946 heavy-duty impact adapter. It is essential to replace them regularly to ensure optimal sealing when injecting windshield repair resin. A seal in good condition ensures effective repair and reduces the risk of leakage.

Reference: 994JOINT

Brand: REPAREGLASS

Seal for 994CLAP plunger for 994 injector

Valve seal 994CLAP for injector 994 1. Effective solution for repairing leaks Quick repair of leaks: This 994CLAP valve seal is designed to solve leak problems on the upper end of the 994 injector. By replacing this small black seal, you can eliminate leaks and ensure optimal operation of your injector. Increased reliability: By replacing the worn...

Reference: 1110-N357

Brand: REPAR'VIT

Vacuum-pressure pump for REPAR'VIT 1330 kit - 2nd life

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months The 1110 vacuum-pressure pump is specially designed to facilitate the repair of impacts on your windshield. It creates a vacuum, which helps to remove air and impurities from the impact area before the resin is injected. Alternating vacuum and...

Reference: 3200

Brand: REPARBRISE

Cylinder + piston for injection of windshield repair resin

Composed of 5 lips, it allows for greater vacuum and therefore faster repair of impacts on windshields. This cylinder + piston is compatible with injection bridges ref. 51 and 9620, as well as with tube ref. 996. To ensure optimal sealing and prevent any leaks due to wear on the seal, it is strongly recommended to order the interchangeable end caps ref....

Reference: 979

Brand: REPARBRISE

Special windshield repair light pen

The Penlight 979 is designed to improve visibility during windshield impact repairs. Thanks to its precise lighting, it allows you to follow the resin injection in detail, ensuring optimal control at every stage of the process. An essential tool for meticulous and professional repairs.

Reference: 969-N370

Large probe for impact repair - 2nd LIFE - N370

Very Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: 994CLAP

Brand: REPAREGLASS

Plunger for Injector Inox 994

Valve for Stainless Steel 994 injector, specially designed for windscreen impact repairs. This replacement part ensures that your injector works properly by guaranteeing that the resin is injected into the impact area with precision and without leaks for an optimal repair.

Reference: SATELLITEDEPONT

Satellite for KIT-FENTES-RPB

The 3200 injector satellite is an essential accessory for the KIT-FENTES-RPB, designed to enable manual injection of crack resin when repairing cracks or splits in windshields. It attaches directly to the 3200 injector and ensures precise and controlled diffusion of the resin into the crack. This satellite is supplied with an O-ring to ensure...

Reference: 969-N375

Large probe for impact repair - 2nd LIFE - N375

Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: 994-N412

Brand: REPARBRISE

Injector for windshield repair resin injection for KIT-1320 - TER1 AND 2 - 2nd life - N412

In very good condition Only a few minor cosmetic defects - 1 Only one available 2nd LIFE warranty: 6 months Allows resin to be injected into impacts using a vacuum/pressure pump, ensuring precise and even application for high-quality repairs. Compatible with professional kits KIT-1320 and TERMINATOR 1 & 2, as well as with the vertical or inverted...

Reference: 931

Brand: REPARBRISE

Single 135 mm UV neon for 1046 and UVB-150 lamp

Single U.V. neon 135 mm - 931- for 1046 and UVB-150 lamp 

Reference: 645

Brand: REPARBRISE

12V carbide drill for drilling impact points

12V carbide drill supplied with built-in chuck lock, specially designed for drilling the impact point on your windscreen before injecting the resin. It is used with our 934, 4509w and 701 drill bits to ensure precise and efficient drilling. This drill is also ideal with a felt pad for polishing the impact after repair, giving a neat finish. It is...

Reference: TER-BATTERIE

Brand: TERMINATOR

Battery for Kit TERMINATOR 1 and 2 and ULTRAPOSE EVOLUTION

Battery for TERMINATOR 1 and 2 Kit and ULTRAPOSE EVOLUTION. You can recharge this battery directly on the TERMINATOR or ULTRAPOSE EVOLUTION, using our TER-CHARGEUR charger.

Reference: 969-N371

Large probe for impact repair - 2nd LIFE - N371

Very Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: HOS-1000-T

2.50M vacuum pump connector hose for TERMINATOR 1 and 2 kits

Connection hose for vacuum pump, specially designed for the TERMINATOR 1 and 2 kits. This hose allows you to repair impacts on windscreens of commercial vehicles, trucks, buses, trams, and other vehicles requiring a long reach. Its length of 2.50 m offers optimal flexibility to easily reach repair areas, even on large windows.

Reference: LP10

Magnifying glass (15x zoom) for viewing windshield impact damage

Plastic magnifying glass (15x zoom) with transparent base. Excellent tool for identifying the type of impact, but also for viewing the impurities contained within it.