Miroir éclairant à LED (verre)

Reference: DPG

Vacuum pump calibration tester for windshield repair

It's imperative to test the calibration of your vacuum pump at minimum once a year, to ensure quality repairs for your customers. French Standard regulation NF R61-980... Frequency of use: once a year. This new regulation allows to ensure that the pressure and vaccum cycles made from the pump are correct ( Pressure tolerance is 0,1 Bar) in order to avoid...

Reference: 969-N367

Large probe for impact repair - 2nd LIFE - N367

Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: 969-N369

Large probe for impact repair - 2nd LIFE - N369

Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: HOS-2010

Rubber Seals (x2) for HOS-2000, HOS-2000-L, HOS-1000-T vacuum pump hoses

Set of 2 replacement seals compatible with HOS-2000, HOS-2000-L, and HOS-1000-T hoses, used with a vacuum pump for windshield repair. It is essential to replace the seals regularly to ensure optimal injection of the resin and prevent any leaks during the repair. The gasket is located inside the hose fittings. In the event of a leak, simply unscrew the...

Reference: LP10

Magnifying glass (15x zoom) for viewing windshield impact damage

Plastic magnifying glass (15x zoom) with transparent base. Excellent tool for identifying the type of impact, but also for viewing the impurities contained within it.

Reference: 645-N33

Brand: REPARBRISE

12V carbide drill for impact drilling - 2nd life

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months 12V carbide drill supplied with built-in chuck lock, specially designed for drilling the impact point on your windscreen before injecting the resin. It is used with our 934, 4509w and 701 drill bits to ensure precise and efficient drilling....

Reference: 983

Brand: REPARBRISE

Seals (X2) for large impact adapter 946

These 2 seals are specially designed for the 946 heavy-duty impact adapter. It is essential to replace them regularly to ensure optimal sealing when injecting windshield repair resin. A seal in good condition ensures effective repair and reduces the risk of leakage.

Reference: 161

Brand: REPAREGLASS

Cigar lighter extension cable for battery

Extension cable for batteries. To put on the cigar lighter.

Reference: 969-N374

Large probe for impact repair - 2nd LIFE - N374

In average condition Cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: 3200

Brand: REPARBRISE

Cylinder + piston for injection of windshield repair resin

Composed of 5 lips, it allows for greater vacuum and therefore faster repair of impacts on windshields. This cylinder + piston is compatible with injection bridges ref. 51 and 9620, as well as with tube ref. 996. To ensure optimal sealing and prevent any leaks due to wear on the seal, it is strongly recommended to order the interchangeable end caps ref....

Reference: 969-N366

Large probe for impact repair - 2nd LIFE - N366

Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: 10357

Rechargeable battery-powered 7.2V carbide drill for impact drilling

Rechargeable 7.2V carbide drill, supplied with battery and charger, specially designed for drilling the impact point on your windscreen before injecting the resin. It is used with our 934, 4509w and 701 drill bits, ensuring precision and efficiency. This drill is also compatible with the polishing felt (ref. 971) for a perfect finish after repair....

Reference: 539

Round UV screen Ø 9cm for deck 9620 - Impact protection

Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: FLEXI-BLADE

Flexible silicone wiper blade for windows and bodywork

Flexible wiper blade made in silicone. Allow to ease the removal of the water from surface to be dried. Appliable on the glass and metal.

Reference: 945-N409

Brand: REPARBRISE

Square mirror REPARBRISE (Plexiglass) - Second Life -N409

Mirror in transition state Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Reparbrise 945 Plexiglas square mirror for repairing windscreen impacts. This mirror allows you to view the impact throughout the repair process. Dimensions: 9.5cm x 9.5cm

Reference: ISHP-BIG

Seals for ADAPT-PBV windshield adapter - Set of 10

Set of 10 seals specially designed for the ADAPT-PBV windshield adapter. Not compatible with the 994 injector (TERMINATOR kit and REPARVIT Senior kit). These seals ensure a perfect seal during resin injection, which is essential for guaranteeing a clean and effective repair of windshield impacts. It is recommended to replace worn seals regularly to...

Reference: 3202

Brand: REPARBRISE

Exchangeable nozzles for REPARBRISE 3200 injector (pack of 5)

This set of 5 interchangeable tips is specially designed for the REPARBRISE 3200 injector. When repairing windshields, uniform sealing is essential to ensure effective injection of the resin without leakage. That is why it is recommended to replace the nozzle tip of the 3200 injector as soon as it shows signs of wear. These nozzle tips ensure optimal...

Reference: 995

Brand: REPARBRISE

Seal for Injector 994 - windshield impact repair

Injector seal 994 provides a homogeneous seal for resin injection into the impact during windshield repair. 1. Homogeneous seal for precise injection Optimised sealing quality: This injector seal 994 provides a perfect seal, guaranteeing uniform and precise injection of the resin into the impact. This results in more effective and higher-quality...

Reference: TER-BATTERIE

Brand: TERMINATOR

Battery for Kit TERMINATOR 1 and 2 and ULTRAPOSE EVOLUTION

Battery for TERMINATOR 1 and 2 Kit and ULTRAPOSE EVOLUTION. You can recharge this battery directly on the TERMINATOR or ULTRAPOSE EVOLUTION, using our TER-CHARGEUR charger.

Reference: 945

Brand: REPARBRISE

Plexiglas mirror

The REPARBRISE 945 mirror, made of high-quality plexiglass, is designed to monitor the progress of windshield impact repairs in real time. Placed inside the vehicle, it provides a clear and continuous view of the impact throughout the repair process, ensuring precise and careful work.

Reference: LUNETTE1048

UV protection glasses

When repairing windscreens, it is essential to wear UV protection goggles, especially when using UV LED lamps, such as our UV lamp 1048. These goggles provide optimal protection against ultraviolet rays, thus reducing the risks to the eyes and guaranteeing maximum safety. Characteristics: - Anti-UV filtration: Effective protection against UV exposure -...

Reference: FIX-2025

Brand: REPAR'VIT

Replacement plunger piston for injection bridge and suction cup

The replacement piston is specially designed to replace the original piston in your windscreen repair equipment. It is compatible with our REF-2000, REF-367, and REF-9620 injection bridges, as well as our REF-GEZ-543-1 suction cup. This replacement piston ensures that your tools continue to perform at their best, guaranteeing precise and reliable resin...

Reference: 1110

Brand: REPAR'VIT

Vacuum-pressure pump for REPAR'VIT 1330 kit

The 1110 vacuum-pressure pump is specially designed to facilitate the repair of impacts on your windshield. It creates a vacuum, which helps to remove air and impurities from the impact area before the resin is injected. Alternating vacuum and pressure with your pump ensures uniform and effective injection of the resin into the impact, guaranteeing a...

Reference: 959

Brand: REPARBRISE

Carbide tip pen for removal of impurities from windshield impact

The carbide-tipped pen is the ideal tool for effectively preparing an impact area prior to repair. It allows you to precisely remove surface impurities, ensuring optimal resin adhesion and a long-lasting repair. Essential for guaranteeing a clean, professional finish on damaged windshields.

Reference: 993

Brand: REPARBRISE

Pressure vacuum pump for REPAR'VIT Senior 1320 kit

The vacuum/pressure pump is an essential tool for optimizing windshield impact repairs. Supplied with its hose ref. 996, it provides a quick and efficient connection between the injector and the pump, making it easy to use. It creates a vacuum to suck out air and impurities from the impact area before the resin is injected. By alternating between vacuum...

Reference: 969

Long probe for impact repair

The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for efficient and controlled repairs.

Reference: 226

Ball for making impacts

The impact ball is an essential tool for training in windshield repair. Specially designed to create realistic impacts on a test windshield, it is ideal for: Training new technicians Practical exercises in training centers Your own training sessions A simple and effective tool for reproducing real-life situations and perfecting repair techniques before...

Reference: FIX-2044

Brand: REPAR'VIT

Metal resin injector for FIX-2001 injection bridge

Metal injector specially designed for injecting windshield repair resin with the FIX-2001 injection bridge. Robust and precise, this injector allows for efficient distribution of the resin to ensure reliable and durable repairs to your automotive glass.

Reference: 977

Brand: REPARBRISE

Large format UV screen 30 x 20 cm - windshield impact protection

Large-format 30 x 20 cm UV screen to protect against ultra-violet light during repairs.

Reference: HOS-2001

Nylon cleaning brush for HOS-2000 hose

Nylon cleaning brush specially designed for the HOS-2000 connection hose. It effectively removes excess resin used during windscreen repairs, ensuring optimal maintenance of your equipment and increased longevity of your connection hoses.