Grand TIROIR F1 - KIT 1320

Reference: BOB-FIBRE

Ecological cleaning paper made of cellulose biber - 100% recycled Milk carton ( 2 rolls of 1000 sheets)

  Ecological wiping spool 100% recycled product Milk carton ECOLOGICAL WIPING SPOOL MADE OF CELLULOSE FIBRES PACK OF 2 ROLLS OF 1000 SHEETS Advantages: No discoloration No delamination or linting More absorbent than chamois rolls Raw material: cellulose fibre Sheet size: 220x300mm Roll length: 300m Diameter: 28cm Grammage: 18.5 ±1g Sold in sets...

Reference: RCH-163

Flexible pull handle with neoprene coating

The REPAREGLASS flexible pull handle with neoprene coating is designed for comfortable and safe use during cold cutting. It has the same features as the classic ZDK-395 handle, with the added advantage of a neoprene coating that improves grip while protecting painted surfaces on the vehicle. Perfect for use with ZDK-395 cold cutting knives, this flexible...

Reference: KPM-5054

Camera sensor adhesive pads for MERCEDES ACTROS - Set of 5

Version : MERCEDES ACTROS Quantité : 5 pièces

Reference: AEB405-N193

Pneumatic knife: Equalizer® EXCALIBUR® DELUXE - 2nd LIFE - N193

Kit in good condition. The case may be incomplete (blades). Only cosmetic defects shown in the photos are present. Only one item available. 2nd LIFE warranty: 6 months Recommended for cutting the lower parts of the windscreen, rear windows and quarter windows. Cutting the interior of the vehicle. Compact and lighter, it is even easier to handle,...

Reference: WK1S

Serrated, long, flat BTB blade, 300mm

Serrated, long, flat BTB blade, 300mm

Reference: AIG-789

Straight wire threader

Many technicians remove windshields by starting the wire through the top and bottom center of the windshield, then cutting towards each side. So as to push the cutting wire into the urethane, especially where there is a wide surface of urethane, we recommend using the wire threader. The slot (1,2 mm only) and the cutting wire are pushed together into the...

Reference: ULTRAPOSE1-DELUXE

Brand: L'ULTRAPOSE

ULTRAPOSE1 DELUXE - Windshield installation and removal tool with vacuum piston, single operator

The UltraPose1 tool - New Version with PE24 Automatic Vacuum Pistons VBSA pushes the boundaries of performance and simplicity even further with the UltraPose1 Deluxe, an advanced version of the windshield installation tool equipped with two PE24 automatic vacuum pistons. Designed for demanding professionals, this tool allows the installation and removal...

Reference: SK150

Replacement blade for fsl 240 pinchweld scraper l:19mm

Replacement blade for fsl 240 pinchweld scraper l:19mm

Reference: RR23-CLIQUETRAPTOR

Ratchet for RAPTOR kit

Please note that this ratchet is not compatible with the RAPTOR Kit. 1 Ratchet For ROLL-N-CUT kit

Reference: TSP-292

Protective foam for bodywork (set of 2)

Effectively protect your vehicle in tight spaces with our bodywork protection foam. Ideal for parking garages or workshops where cars are parked very close together and are difficult to move. Characteristics: Dense rubberized foam: One side is made of dense rubberized foam that provides optimal protection against impacts and scratches. Flexible suction...

Reference: NSE-B

Professional extendable lashing bars for light commercial vehicles.

Professional extendable lashing bars for light commercial vehicles. Allows you to modulate the spaces on a daily basis according to your load. High resistance skids, anti-slip, adjustable up to 180º. Non-slip handles Tightened by a threaded rod at both ends. Our bars are covered with foam to protect your equipment. Available in 2 sizes: - REF....

Reference: VB11988

Windshield molding

Sold in packs of 10 Type: Windshield molding Color: Black

Reference: 8PZ010607-981-DESTOCKAGE

CSC TOOL Target - HONDA 1-06 - Clearance Sale

Please note: Only 2 targets available CSC TOOL - HONDA 1-06

Reference: VB1102004

Interior windshield clips

Sold in packs of 10

Reference: VB1102002

White clips

Sold in packs of 10

Reference: VP-230-N320

Piston Suction Cup Ø 230 mm – Lifting Capacity 380 kg - Second Life - N320

In very good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting...

Reference: VB4000707

Canopy sheet metal staples

Sold in packs of 10

Reference: FB211

Serrated hook blade with U shape - 24 mm

Lame à crochet crantéeprofondeur de coupe : 24 mmvendue à l'unité

Reference: 3307

Handle: EQUALIZER® Ninja pneumatic knives

The EQUALIZER® Ninja pneumatic knife handle is a replacement part designed specifically to restore or improve the grip of your tool. Robust and ergonomic, it allows you to maintain optimal control of the knife during cold cutting, even in the most complex areas. Features: Exclusive compatibility: designed exclusively for the EQUALIZER® Ninja model...

Reference: 8PD015265-841

MEGA MACS X: La solution de diagnostic innovante - toujours individuelle, toujours flexible

Faisant totalement table rase des vieilles habitudes, le mega macs X révolutionne la façon de travailler et la communication avec le véhicule. Découvrez la solution de diagnostic la plus flexible de Hella Gutmann Solutions : plus maniable que jamais et à la pointe de la technologie, le mega macs  s’adapte à tous les besoins.

Reference: LAC-405-N503

Suction Cup Anchor for Holding a Cutting Rope - Second Life - N503

In fair condition Overall condition: No issues Cosmetic defects shown in the photos are present — Only one item available 2nde VIE Warranty: 6 months Suction cup for holding the windscreen gasket cutting cord

Reference: LAME-STANDARD-EXC

Standard blades for Excalibur - 100 mm, 200 mm, and 300 mm

Designed for glass and windshield replacement professionals, Equalizer® standard blades are made of unbreakable mild steel, ensuring flexibility of use without risk of breakage. If they become bent, they can be easily straightened with pliers, extending their service life. They are easy and efficient to sharpen using a grinder, belt sander, file, or...

Reference: 240

Empty RAPTOR case

Dimensions: 41 x 30 x 10 cm Sold without foam

Reference: CS-696

Clipsaver door upholstery remover

EQUALIZER® ClipSaver door upholstery remover The front of the tool is tapered so it will fit easily under a clip. Spread the jaws slightly so they will go under and around the clip. Then, close the jaws and it removes the clip without damaging it. Great for the removal of door panels. - 230 x 76 x 51 mm - 205 g

Reference: SD-21

Braided wire - ø 0,80 mm - 22.5M

Braided wire21 ml REPAREGLASSBraided wire The braided wire is made of three stainless steel resistant wires that are braided to one strand. The wire is anodized (with a traditional gold colour). It has a 0.80mm diameter.

Reference: VB3407004

Black side metal clip

Sold in packs of 10

Reference: Z30

Special cold knife blade 30 mm

This blade series enables you to use a cold knife where you could never use it before ! The 60 mm long blade isintended to cut all those hard to reach PU bondings that are far away from the glasses edge and where a normalcold knife blade could never reach. But also all lowerglass edges with surmounting wings and bonnets are aperfect field of application...

Reference: TRI-176

Triangular wire - 0.85mm - 50ML

REF. TRI-176Triangular wire.0,85 x 0,85 mm,Length : 50 metersTensile strength : 691 Newton

Reference: 8PD015269-101

CSC tool (VW )

Not available

Reference: SHM-108

High protection knitted gloves - Size M

Our high-protection knit gloves are designed to combine comfort, durability and safety. Made of cotton and nylon, they are sturdy and comfortable to wear, while ensuring an excellent grip. Thanks to their special coating and internal traction points, they offer enhanced protection against cuts while maintaining good tactile sensitivity. Characteristics: -...