Big Drawer F1 - KIT 1320

Reference: ZLN-914

Nylon wire - Ø 1.05 mm, Longueur : 100 ML - 2000 Newton

- Multi-purpose with 1 length (approx. 2 to 4 uses) - Does not scratch surfaces - No snags on the windscreen bay or windscreen seal - Can be used with all ratchet systems - Very fine Ø 1.05 mm, Length: 100 M 2000 Newton

Reference: 8PZ010624-121

Cible CSC TOOL MOBILE - MAZDA 1-12

Reference: VNT-306

Cutting pliers for windshield adhesive application nozzle

This cutter is specially designed to precisely cut the nozzle of polyurethane cartridges used for installing windshields. It quickly creates a perfectly even V-shaped notch, which is essential for applying a clean and uniform bead of adhesive. It is easy to use: first cut the end of the nozzle to the desired width, then insert the pliers into the opening...

Reference: AIG-789

Straight wire threader

Many technicians remove windshields by starting the wire through the top and bottom center of the windshield, then cutting towards each side. So as to push the cutting wire into the urethane, especially where there is a wide surface of urethane, we recommend using the wire threader. The slot (1,2 mm only) and the cutting wire are pushed together into the...

Reference: 1040-137

Piston - powerpush battery-operated pistol

This replacement piston is specially designed for POWERPUSH 18V battery-powered piston guns, ensuring optimal pushing power and smooth operation during extrusion. Made with robust materials for maximum durability, this piston guarantees consistent performance even with intensive use. Easily replace your worn piston to extend the life of your gun and...

Reference: RTD-499

Pair of ratcheting tie downs - length: 5m

Pair of ratcheting tie downsRatcheting tie downs are used by glaziers to secure freshly bonded-in glasses.Use these ratcheting tie downs together with our suction cups so as to hold vertical-glazed glasses in place while the urethane cures. The ratcheting tie downs are simply passed through the handles of the vacuum cups and tight-ened.- 165 x 165 x 10 mm...

Reference: MS-180

Installation stick

Reference: 8PZ010611-471

Cible CSC TOOL - TOYOTA 1-11

Reference: BOB-FIBRE

Ecological cleaning paper made of cellulose biber - 100% recycled Milk carton ( 2 rolls of 1000 sheets)

  Ecological wiping spool 100% recycled product Milk carton ECOLOGICAL WIPING SPOOL MADE OF CELLULOSE FIBRES PACK OF 2 ROLLS OF 1000 SHEETS Advantages: No discoloration No delamination or linting More absorbent than chamois rolls Raw material: cellulose fibre Sheet size: 220x300mm Roll length: 300m Diameter: 28cm Grammage: 18.5 ±1g Sold in sets...

Reference: BOB-1.5-ROLL-OUT

Round wire in a spool REPAREGLASS - ø 0,80 mm, 1500 ml

Round wire in a spool The round profile and the small diameter make this wire a real problem solver for todays cars with narrow gaps between glass and body. It has the same high tensile strength than the VKD-44but offers at the same time as much lower risk to damage interior linings and dashboards.679 Newtonø 0,80 mm, 1500 ml

Reference: NSE-KITTUBEB

Set of 6 wooden tubes for large wooden rack

Reference: VB3105003

Black side clip

Sold in packs of 10 Weight: 0.0016 kg

Reference: Z8RV

New Paint Protection Reverse Bend Blade 25mm « ULTRAWIZ »

Nylon coating protects exposed paint from accidental blade contactIdeal for exposed glass with underside molding or encapsulationOffers the control a technician needs to cut awayfrom the glass or moldingAvailable in 3 lengths : 19 mm – 25 mm – 38 mm

Reference: TUBE-MILWAUKEE

Tube - Milwaukee battery gun

Replacement tubes compatible with Milwaukee 12V and 18V battery guns. Available in 310-400 ml and 600 ml versions, they allow you to use cartridges or cans according to your needs. Ideal for bonding or sealing applications, these tubes guarantee smooth, even distribution. Robust and reliable for intensive professional use.

Reference: VB3104009

Side trim clip for windshield

Sold in packs of 10

Reference: AB10

9 mm snap-off blades for ol30 knives

9 mm Snap-off blades forOL30 knives (Package of 10 pieces) Olfa®knife Standard knives with a wide 18mm blade are generally too wide to accomplish fine jobs. With its retractable blade of 9mm wide, this knife allows a fine cutting with one hand. - 85 x 9 x 0,4 mm - 38 g (Package of 10 pieces)

Reference: WK24Z

Deep offset, BTB blade, 150mm

Deep offset, BTB blade, 150mm

Reference: SERV-FAT

Modular mobile workshop trolley made from two materials - bare

Designed for demanding professionals, this modular dual-material mobile workshop trolley combines robustness, modularity, and ample storage capacity. Its intelligent design allows easy access to all your tools while ensuring smooth and safe transport on all types of construction sites. Main features: Removable 50 cm tool box with integrated tool holder...

Reference: FBS129

Scraper blade set

Jeu de 2 lames à racler. l'une large de 12 mm, l'autre de 25 mm

Reference: 8PZ010611-451

Cible CSC TOOL - HONDA 1-09

Reference: 5026-400-14V-EU-N247

Powerpush Battery Gun Berlingots 400ml – 14V – Second life – N247

Brand new, still in its original box Only a few cosmetic defects shown in the photos – Only 1 unit available Second Life Warranty: 6 months Powerpush 14V Battery Gun The PowerPush gun is designed to deliver unmatched power and optimal efficiency, ensuring smooth and effortless application of PU in any situation. Powerclutch Transmission: Improves...

Reference: FSC1.7BAT

FEIN battery knife - without blade, without battery

Discover an innovative, high-performance solution for automotive work, combining power, precision and practicality. Technical specifications: Battery voltage: 18 V Battery capacity: 5 Ah Oscillations: 10,000 - 19,500 rpm Weight with battery: 1.8 kg Amplitude: 2 x 1.7 Tool holder: hexagonal Please note: Supplied without blade, battery or charger. -...

Reference: VB4000714

Canopy sheet metal staples

Sold in packs of 10

Reference: VB4000410

White side clip

Sold in packs of 10

Reference: BLACKNIT

Black protective nitrile gloves (powder-free), thick, special for various repairs

Give your hands optimum protection with our powder-free black nitrile gloves, designed for professional, all-purpose use. Recommendations for use : Store in a cool, dry place, away from excessive heat (maximum temperature: 40°C). Open tin to be protected from UV rays and direct exposure to sunlight. Packaging: Sold in boxes of 100 pieces, ideal for...

Reference: PSH-120

Pair of suction cups - Load capacity: around 80kg

Pairof suction cups (Ø 120 mm)Vacuum cups allow you to hold safely a window that is ready to install. The edge of the window must not be touched once the window is ready for the installation. Each vacuum swivels up and down approximately 30° to fit radically contoured glass. Simply set the vacuum cups in place and push the thumb latches down to engage the...

Reference: PWR-5076

Plastic nozzle holder for MILWAUKEE

Plastic washer for holding nozzles, compatible with MILWAUKEE extruder guns. Ensures reliable, stable nozzle attachment during extrusion, preventing loosening during application.

Reference: DST-734

T-handle wire threader with hole

REF-DST-734 T-handle wire threader with hole Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.120 x 26 x 10 mm • 20 g

Reference: Z1022

Cold knife blade

This special blade reaches the urethane between the wheel cover and the side of the windshield.Its unique shape allows you to unbond the windshield with a cold knife, without having removed the wheel cover (also bond) before. Once the windshield is removed, you can unbond the wheel cover, wihtout risking to damage the remaining material.- Sold...

Reference: DESTOCK-VB54

3.0 Ah Li-ion battery for V54 pistol

Specially designed for the V54 gun, this 14.4V lithium-ion battery offers optimal autonomy and power for all your windshield bonding applications. With a capacity of 3.0 Ah, it guarantees continuous, high-performance work, even during intensive use. Features: High-performance 3.0 Ah Li-Ion battery Voltage: 14.4V Compatible exclusively with the V54 gun...