VBSA awarded ECOVADIS label
Banner
There are various types of windshield bonding, including polyurethane-based adhesives that offer high resistance and a good seal. Reactive adhesives and specific glazing adhesives are also commonly used. The adhesive is applied when replacing or repairing a windscreen. It is important to follow the manufacturer's instructions on drying time and application conditions. Correct bonding is crucial to the safety of the vehicle, as a poorly bonded windshield can compromise the structural integrity of the vehicle in the event of an accident. Windscreen adhesives must comply with safety and performance standards to ensure the safety of passengers, particularly in the event of an accident. Our windscreen adhesives have been tested and validated by TUV (Crash test) + OEM (Used by manufacturers in 1st assembly) FMVSS208/212 standards. Product on the market for over 20 years
There are 65 products.
Reference: 501K-310
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. FAST-drying, one-component polyurethane bonding agent that reacts with humidity in the air to form a strong and elastic seal. The adhesive is used...
Reference: 501FC-310
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. FAST-drying, one-component polyurethane bonding agent that reacts with humidity in the air to form a strong and elastic seal. The adhesive is...
Reference: 530-30
Our glass/metal primer is a black, the curing of which is both physical and chemical.content solvent to prepare the windshield and the pinchweld befor the bonding. Primer 530 promotes polyurethane adhesion and protects against UV rays. It also has preventive anti-corrosion properties. If there are traces of rust on the bodywork, it is imperative to use...
Reference: 520-30
Solvent-based cleaner with adhesion-activating properties for pre-treating direct bonded pro windshields, Single-application wipe-off. Various packaging options: 30ml bottle - Ref.530-30 - Sold individually or in boxes of 25 250 ml bottle - Ref.530-250 - Sold individually or in boxes of 12 1L bottle - Ref.530-1 - Sold individually or in boxes of 12...
Reference: KIT501FC-HM-LC-HV-400
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. SAVETY DRIVE-AWAY TIME 501FC-HM-LC-HV: Curing time (23°-50%) Airbags: 30 minutes Our 501FC windshield bonding kit contains : - 1x 310 ml cartridge...
Reference: KIT501K-310
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. SAVETY DRIVE-AWAY TIME 501K: Curing time (23°-50%) - Airbag: 1 hour - Airbags: 2 hours Our 501K windshield bonding kit contains : - 1x 310 ml...
Reference: BIGKIT501FC-400
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. SAVETY DRIVE-AWAY TIME 501FC-HM-LC-HV: Curing time (23°-50%) Airbags: 30 minutes If you regularly change windshield bonding, choose our BIG KIT for...
Reference: BIGKIT501K-400
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. SAVETY DRIVE-AWAY TIME 501K: Curing time (23°-50%) - Airbag: 1 hour - Airbags: 2 hours If you regularly change windshield bonding, choose our BIG...
Reference: 505HM-290
MS-POLYMER is a high modulus, low conductivity, whithout isocyanate, multi-supports windshield bonding. FMVSS212 certified MS polymer bonding is normally used for bonding glass / textile or canvas (e.g. cabriolet, etc.). Drying time: 1 hour with 2 airbags Packaging : 290 ml cartridge: Sold individually or in box of 12. Select your packaging below:
Reference: 535
Clear activating cleaner for 505 HM MS-POLYMER windshield bonding. Only for use with 505 HM - MS POLYMER bonding. Sold in 30ml bottles or box of 12.
Reference: F1FC-310
PRIMERLESS windshield bonding. ULTRA FAST PRIMERLESS application is different from the traditional application, it consists of using our F1 activating cleaner followed by the "F1fc" polyurethane bonding agent compared to the traditional application composed of 3 products (degreaser, primer and bonding). VEHICLE CURING TIME Curing time (23°-50%) Airbag: 30...
Reference: F1K
PRIMERLESS windshield bonding. FAST PRIMERLESS application is different from the traditional application, it consists of using our F1 activating cleaner followed by the "F1K" polyurethane bonding agent compared to the traditional application composed of 3 products (degreaser, primer and bonding). VEHICLE CURING TIME Curing time (23°-50%) Airbag: 1 hour -...
Reference: F1-250
F1 cleaner activator can only be used with our F1FC and F1K Windshield Bonding. Apply a single coat with a felt applicator, then wipe clean with a dry lint-free cloth or cleaning towel (BOB-FIBRE or BOB-CHAM). Sold individually or in box of 12
Reference: AP-100
Felt Applicators must be used to apply the primer or activating cleaner correctly to the Windshield or Bodyshop. Box of 100. Length 105 mm
Reference: AP100SPECIAL
Felt Applicators must be used to apply the primer or activating cleaner correctly to the Windshield or Bodyshop. Box of 100. Length 130 mm
Reference: APC-150
A WOOL APPLICATORS FOR FRAME: length : 150 mm Small wool applicator with small head, wood handle. Pack of 150
Reference: DEG-ADA
Universal cleaner for alcohol-free surface treatment. For use in the decontamination process when applying windshield or other bonding. Can also be used as a solvent for applications of sound deadening products. Sold individually in 1L bottle or in box of 12.
Reference: DEC-50
This decontamination process is imperative if the windshield bonding is to last. The thermoformed packaging produces a chemical reaction on your windscreen, making it difficult to bond without a decontamination step before bonding. Thermoforming is carried out under a source of heat, which causes an excess of silicone on the surface, preventing the...
Reference: 550-250
Specially developed for use on galvanized sheet metal, aluminium, steel, reinforced fibreglass, polyester, etc... (ex. cars without a driving licence, etc.) Facilitates adherence of the polyurethane to the substrate, prevents damage to the seal caused by UV rays, prevents rust, and has low conductivity. sold in 250 ml bottles or box of 12
Reference: 460
A polyvalent product, it can be used to waterproof both spot-welded and demountable elements (e.g. sliding roofs). Butyl mastic sealing used for camper van roof window. The product is permanently elastic and resistant to UV rays. High solids content. Colour: black Packaging : Sold individually in 310 ml cartridges or in box of 12.
Reference: S-120
Butyl mastic sealant is a flexible, non-polymerisable synthetic elastomer-based butyl mastic with a wide range of applications, providing a watertight seal between manhole covers. For bonding glass, motorhome skylights, louvres, doors, etc. Diameter: 9.5 mm Length: 4.5 m Colour: black Packaging: Rn roll
Reference: 769
Brand: REPARBRISE
Eliminates traces of oil, insects and dust. Used in industry, cars and construction. For cleaning windshields, windows and outside mirrors. Sold in 5L drums Also available - 750ml aerosol - Ref.768 and 20L drum - Ref.770
Reference: 770
Brand: REPARBRISE
Eliminates traces of oil, insects and dust. Used in industry, cars and construction. For cleaning windshields, windows and outside mirrors. Sold in 20L drums Also available - 750ml aerosol - Ref.768 and 5L drum - Ref.769
Reference: 1336
Adhesive pads used by equipment manufacturers for interior rear-view mirrors. For interior mirrors Pack of 100 stickers.
Reference: 3300
Easy to bond glass and metal together and on top of each other. Temperature resistant from -20°C to + 80°C, with a short access to 120°C.. Drying time: 3min Thixotropic Possibility to fill holes until 6mm. Vertical application possible, good chemical resistance, transparent bonding.
Reference: 3317
Glass and mirror bonding adhesive (26 ml) with primer activator (150ml). Bodywork repair - Bonding glass - Glass-to-metal bonding For fixing mirror bases, deflector locks and any glass/metal or metal/metal assembly. Advantages : Suitable for bonding rigid, close-fitting metal or ceramic assemblies The product polymerises in the presence of the activator,...
Reference: 3320
Glass and mirror bonding adhesive (15 ml) with brush application of activator primer (15 ml). Bodywork repair - Bonding glass - Glass-to-metal bonding For fixing mirror bases, deflector locks and any glass/metal or metal/metal assembly. Advantages : Suitable for bonding rigid, close-fitting metal or ceramic assemblies The product polymerises in the...
Reference: 601M
Special glass-breakage film Adhesive window film to protect the interior of your vehicle from water and dust before replacing broken or damaged windows. Lightly adhesive, supplied with 2 rolls of 60 cm x 50M = 100M
Reference: B12
Not cut nozzles x12 to size for 400 or 600ml saussage windshield bonding Set of 12 nozzles
Reference: BD12
Pre-cut nozzles for 400 or 600ml windshield bonding saussages. Pack of 12 pre-cut nozzles
Reference: C12
No pre-cut nozzles x12 for windshield bonding cartridges 501K, 501FC, F1K, F1FC in 310ml Pack of 12 no pre-cut cartridge nozzles
Reference: CD12
Pre-cut nozzles x12 for windshield bonding cartridges 501K, 501FC, F1K, F1FC in 310ml Pack of 12 pre-cut cartridge nozzles
Reference: MBS
Our MBS cartridge preservative will enable you to store and preserve your opened windscreen glue, sealant or silicone cartridges in a hermetically sealed, dry environment that avoids any chemical fumes. How do I use it? Nothing could be simpler: - Insert the cartridge - Then place a filter containing moisture-absorbing silica gel beads on top. - Close...
Reference: GL-1153
TEMPERATURE CONTROL DEVICE FOR PB glue cartridges and cans in 12 or 24 V DC and 230 V AC keeps cartridges at the right temperature, cigarette lighter connection. Input voltage (AC), [V]: 220-240 Input voltage (DC), [V]: 12/24 - Cools down to 27 ºC below ambient temperature and heats up to +65 ºC - Active battery protection prevents deep discharge of the...
Reference: KB-1228
Pack of 50 rubber blocks for perfect positioning when bonding the windshield. Position the blocks before bonding your windshield once you've finished preparing the bay. L:2.5 cm x W:1.5cm x E:0.9cm
Reference: KZS-163
Cutting nozzle tool for windshield bonding and other applications. The nozzle clamp makes it quick and easy to make an exact V-shaped cut in the nozzle tip of the polyurethane cartridge. This is important for good work! Because a bonding line must be applied with precision. Simply cut the tip of the nozzle to the required opening width.
Reference: PLA0331-DESTOCK
Applicator cap for application of cleaner and primer
Reference: PLA0334-DESTOCK
Plastic bottle for primer, cleaner, etc…
Reference: POSTER-CPB
Windshield bonding process poster ( including technical different steps ) for a proper use Available for export only with a product order. No delivery possible on its own
Reference: POSTER-PRIMERLESS
Primerless windshield bonding poster (PRIMERLESS) detailing the various stages in the bonding process for automotive glass. Available for export only with a product order. No delivery possible on its own
Reference: SU1423
Wall-attached towel holders. For wall fixing or installation on our wooden racks. Adapted for REF-PB-1349 wipes (box not included).
Reference: VB4000103
Self-adhesive rubber blocks - Pack of 10 L:3cm x W:0.5cm x E:0.5cm for perfect positioning when bonding the windshield.
Reference: VB4000409
Self-adhesive rubber blocks - Pack of 10 L:3cm x W:0.6cm x E:0.6cm for perfect positioning when bonding the windshield.
Reference: VNT-306
Equalizer® VNT306 nozzle clamp The nozzle clamp makes it fast- curing and easy to make an exact V-notch in the nozzle tip of the polyurethane cartridge. This is important for efficient work! Because a bonding bead has to be applied with care. Simply cut the nozzle tip to the required opening width, insert the pliers into the opening as far as they will go...
Reference: 2130
Glue remover removes glue residues from bodywork. Warning: Do not use as an activator or windshield cleaner. CKW-free silicone remover - free from chlorine derivatives. Fast-drying surface cleaner that completely removes silicone, grease and oil before painting vehicles. Before painting, it easily removes sanding dust, mastics, undercoats and films of oil...
Reference: L3090
Two-component fast-curing adhesive. Universal use. High gap-filling capacity (5 mm). For professional repairs. LOCTITE 3090 is a fast- curing, two-component adhesive with excellent bonding performance, making it suitable for a wide range of substrates, including plastics, rubber and metals. Its gel consistency prevents the adhesive from running, even on...
Reference: L480
LOCTITE 480 is a reinforced, fast- curing instant adhesive ideal for bonding metal to metal, rubber or magnets, particularly in humid environments. LOCTITE® 480 is an instant adhesive designed for bonding difficult-to-bond materials requiring uniform stress distribution and high tensile and/or shear strength. It is a rubber-reinforced adhesive offering...
Reference: LA-200
Steel wool specially designed to remove difficult marks from all types of glass (e.g. paint mist, whitish solvents, glue residues, etc.). DO NOT USE ON VEHICLE MIRRORS (rear-view mirrors) Can be used to improve adhesion to screen printing. Use dry. Blow well after use to remove metal dust. FOR WINDOWS : - removes light scratches - cleans dirt without...
Reference: JPM-MBS
Small seal for SADURR® half-used cartridge preservative Sold individually
Reference: JGM-MBS
Large seal for SADURR® half-cartridge preservative Sold individually
Reference: Q-BOND-PRO
Adhesive, filling and reiforcing powders for repairingQ-BOND professionnal kit Q-BOND is one of the finest products for repairing various types of breaks, cracks and other damages to wide range of items. It has received various awards for outstanding quality and superior performance. For more serious repairs there is the two-part system with unique...
Reference: Q-BOND-S
Adhesive, filling and reiforcing powders for repairingQ-BOND Standard kit Q-BOND is one of the finest products for repairing various types of breaks, cracks and other damages to wide range of items. It has received various awards for outstanding quality and superior performance. For more serious repairs there is the two-part system with unique reinforcing...
Reference: KIT-PLV
Our POS kit is free, so don't hesitate to ask for it. POS kit containing: - A VBSA general range desk mat - A mouse pad - A special windshield gluing poster (methodology) - A windshield repair poster (methodology) - A special windshield tools poster - A special windshield decontamination poster - Samples of windshield seals
Reference: 2105
Glue remover removes glue residues from bodywork. Warning: Do not use as an activator or windshield cleaner. CKW-free silicone remover - free from chlorine derivatives. Fast-drying surface cleaner that completely removes silicone, grease and oil before painting vehicles. Before painting, it easily removes sanding dust, mastics, undercoats and films of oil...
Reference: BOB-CHAM
Wadding cleaning paper PEFC certification, PEFC Label. Suitable for food contact Controlled consumption thanks to sheet-by-sheet distribution. Sheet dimensions: 340 x 257 mm - perforated. Roll length: 350 m Diameter of the roll: 30 cm Grammage: 2 x 19g/m². Pack of two rolls of 1000 sheets = 2000 sheets Sold in sets of 2...
Reference: BOB-FIBRE
Ecological wiping spool 100% recycled product Milk carton ECOLOGICAL WIPING SPOOL MADE OF CELLULOSE FIBRES PACK OF 2 ROLLS OF 1000 SHEETS Advantages: No discoloration No delamination or linting More absorbent than chamois rolls Raw material: cellulose fibre Sheet size: 220x300mm Roll length: 300m Diameter: 28cm Grammage: 18.5 ±1g Sold in sets...
Reference: DEV-BOB-CHAM
Dispenser for BOB-CHAM or BOB-FIBRE cleaning paper, supplied without reel
Reference: CHAMB
Ideal for cleaning applications, high-tech and virtually indestructible. Replaces chamois and polishing cloths, machine-washable without softener. Use for car windows, car polishing, polish and polish remover.
Reference: MICRO-CARBON
Discover our carbon fiber microfiber, specially designed for impeccable window cleaning without leaving streaks or residues. Thanks to advanced carbon fiber technology, this ultra-soft microfiber easily picks up dust, dirt and fingerprints, while eliminating traces of water and cleaning products. Washable and reusable, it offers long-lasting performance...
Reference: ATP5
Transparent adhesive tape for repositioning your Toll PASS or Navigation device after replacement of the windshield. Cut to the required length. Roll size. Width: 12.7 mm - Length 5M Supplied without fixing and without PASS
Reference: LING-80
LING-80 is ideal for bodywork, carpentry and public works on all surfaces.LING-80 is a wipe specially developed for professionals to remove traces and deposits of :- windshield bonding putty- aluminum or PVC joinery assembly glue- bitumen stainsLING-80 is gentle on hands. It is impregnated with a plant-based product.
Reference: 3300-BUSE
Nozzle for bonding 3300 and LOCTITE L3090 Pack of 10
