• VBSA awarded ECOVADIS label

  • Banner

530 special glass/metal primer for windshield bonding preparation

530-30

Our glass/metal primer is a black,  the curing of which is both physical and chemical.content solvent to prepare the windshield and the pinchweld befor the bonding.

Primer 530 promotes polyurethane adhesion and protects against UV rays.

It also has preventive anti-corrosion properties.

If there are traces of rust on the bodywork, it is imperative to use our RC800 OR RC900 rust converters before applying the 530 primer.

Available in a range of pack sizes:

30ml bottle - Item: 530-30 - Sold individually or in boxes of 25

100ml bottle - Item: 530-100 - Sold individually or in boxes of 12

250 ml bottle - Item: 530-250 - Sold individually or in boxes of 12

1litre bottle - Item: 530-1 - Sold individually or in boxes of 12

Select your packaging below.

Packaging
Please log in to your account to display prices
Quantity

Product Details
530-30
You might also like

Reference: CHAMB

Microfiber for glass and polishing 40 x 40 cm

Ideal for cleaning applications, high-tech and virtually indestructible. Replaces chamois and polishing cloths, machine-washable without softener. Use for car windows, car polishing, polish and polish remover.

Reference: HDS-480NEW

Adjustable windshield trestle

Adjustable windshield trestleREPAREGLASS- width multi-adjustable for different lengths and weights so as carry all sizes of windshields.- Very sturdy version, load capacity up to 250Kg.- Made of electroplated steel, diameter: 30 mm.- Resistant foam at the base of the trestle.- 105 cm x 95 cm x 110 cm6.700 kg

Reference: 520-30

520 cleaner for windshield bonding preparation

Solvent-based cleaner with adhesion-activating properties for pre-treating direct bonded pro windshields, Single-application wipe-off. Various packaging options: 30ml bottle - Ref.530-30 - Sold individually or in boxes of 25 250 ml bottle - Ref.530-250 - Sold individually or in boxes of 12 1L bottle - Ref.530-1 - Sold individually or in boxes of 12...

Reference: 501K-310

501k polyurethane windshield bonding agent - FAST - Casual process

FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. FAST-drying, one-component polyurethane bonding agent that reacts with humidity in the air to form a strong and elastic seal. The adhesive is used...

Reference: 6200

Reinforced black fibrous adhesive tape 50mm

For protection of all sensitive surfaces (mudguards, hood corners or headlining during windscreen cutting)! Adhesive tape is also very effective for securing windows that have just been installed, preventing them from sliding down after installation.

Reference: PB-1349

Brand: REPAREGLASS

Silicone decontaminant pre-impregnated towels for windshield and hands

Our pre-impregnated towels are highly effective for cleaning and decontaminating adhesives, grease, silicone, etc.They are particularly suitable for cleaning hands of polyurethane, grease and other soiling, while giving them a pleasant citronella fragrance.Once your hands are clean, the wipe still has enough active agents to clean tools, toolboxes,...

Reference: F1K

F1K windshield bonding - FAST - Primerless (Application without primer)

PRIMERLESS windshield bonding. FAST PRIMERLESS application is different from the traditional application, it consists of using our F1 activating cleaner followed by the "F1K" polyurethane bonding agent compared to the traditional application composed of 3 products (degreaser, primer and bonding). VEHICLE CURING TIME Curing time (23°-50%) Airbag: 1 hour -...

Reference: F1FC-310

F1FC windshield bonding - ULTRA-FAST - Primerless (Application without primer)

PRIMERLESS windshield bonding. ULTRA FAST PRIMERLESS application is different from the traditional application, it consists of using our F1 activating cleaner followed by the "F1fc" polyurethane bonding agent compared to the traditional application composed of 3 products (degreaser, primer and bonding). VEHICLE CURING TIME Curing time (23°-50%) Airbag: 30...

Reference: POSTER-CPB

Windshield bonding process poster

Windshield bonding process poster ( including technical different steps ) for a proper use Available for export only with a product order. No delivery possible on its own

Reference: FZS-128

Large PVC hood protection covered with foam.

HOOD PROTECTION - 1400 x 1840 mm Several sizes available: FENDER PROTECTION: Suitable for fender protection - 1400 x 800 mm FRONT PROTECTION: Suitable for front panel protection - 1900 x 700 mm CUSTOM DESIGN: Contact us Can also be made to measure on request for glazing, lorries, buses, underground railways, public works, etc.

Reference: DEC-50

Foam sponge for decontaminating silicone before windshield bonding - Bag of 50

This decontamination process is imperative if the windshield bonding is to last. The thermoformed packaging produces a chemical reaction on your windscreen, making it difficult to bond without a decontamination step before bonding. Thermoforming is carried out under a source of heat, which causes an excess of silicone on the surface, preventing the...

Reference: PORTE-CRIT

Pack of 100 adhesive CRIT'AIR sticker holders

Unfortunately, you can't replace your CRIT'AIR sticker after changing your windshield. This is now possible thanks to the CRIT'AIR adhesive sticker holder. ADVANTAGES: -Economical (price of sticker holders). -Adhesive design adapted to Crit'Air stickers. The CRIT'AIR sticker is now required in most town centrer in France.

Reference: MICRO-CARBON

Carbon fiber microfiber - glass cleaning - pack of 5

Discover our carbon fiber microfiber, specially designed for impeccable window cleaning without leaving streaks or residues. Thanks to advanced carbon fiber technology, this ultra-soft microfiber easily picks up dust, dirt and fingerprints, while eliminating traces of water and cleaning products. Washable and reusable, it offers long-lasting performance...

Reference: LA-200

Steel wool for removes difficult marks from all types of glass and inox parts

Steel wool specially designed to remove difficult marks from all types of glass (e.g. paint mist, whitish solvents, glue residues, etc.). DO NOT USE ON VEHICLE MIRRORS (rear-view mirrors) Can be used to improve adhesion to screen printing. Use dry. Blow well after use to remove metal dust. FOR WINDOWS : - removes light scratches - cleans dirt without...

30 other products in the same category:

Reference: BIGKIT501FC-400

Windshield bonding BIG kit saussage 501FC - VERY FAST CURING ( bonding + cleaner + primer)

FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. SAVETY DRIVE-AWAY TIME 501FC-HM-LC-HV: Curing time (23°-50%) Airbags: 30 minutes If you regularly change windshield bonding, choose our BIG KIT for...

Reference: 2105

Glue remover and before painting cleaner 5L for bodywork cleaning

Glue remover removes glue residues from bodywork. Warning: Do not use as an activator or windshield cleaner. CKW-free silicone remover - free from chlorine derivatives. Fast-drying surface cleaner that completely removes silicone, grease and oil before painting vehicles. Before painting, it easily removes sanding dust, mastics, undercoats and films of oil...

Reference: MICRO-CARBON

Carbon fiber microfiber - glass cleaning - pack of 5

Discover our carbon fiber microfiber, specially designed for impeccable window cleaning without leaving streaks or residues. Thanks to advanced carbon fiber technology, this ultra-soft microfiber easily picks up dust, dirt and fingerprints, while eliminating traces of water and cleaning products. Washable and reusable, it offers long-lasting performance...

Reference: MBS

SADURR® Individual preservative for used cartridges

Our MBS cartridge preservative will enable you to store and preserve your opened windscreen glue, sealant or silicone cartridges in a hermetically sealed, dry environment that avoids any chemical fumes. How do I use it?  Nothing could be simpler:  - Insert the cartridge - Then place a filter containing moisture-absorbing silica gel beads on top.  - Close...

Reference: LA-200

Steel wool for removes difficult marks from all types of glass and inox parts

Steel wool specially designed to remove difficult marks from all types of glass (e.g. paint mist, whitish solvents, glue residues, etc.). DO NOT USE ON VEHICLE MIRRORS (rear-view mirrors) Can be used to improve adhesion to screen printing. Use dry. Blow well after use to remove metal dust. FOR WINDOWS : - removes light scratches - cleans dirt without...

Reference: LING-80

Cleaning wipes for putty, glue, resin...

LING-80 is ideal for bodywork, carpentry and public works on all surfaces.LING-80 is a wipe specially developed for professionals to remove traces and deposits of :- windshield bonding putty- aluminum or PVC joinery assembly glue- bitumen stainsLING-80 is gentle on hands. It is impregnated with a plant-based product.

Reference: 505HM-290

MS-POLYMER 505 HM windshield bonding - Multi-supports and materials

MS-POLYMER is a high modulus, low conductivity, whithout isocyanate, multi-supports windshield bonding. FMVSS212 certified MS polymer bonding is normally used for bonding glass / textile or canvas (e.g. cabriolet, etc.). Drying time: 1 hour with 2 airbags Packaging : 290 ml cartridge: Sold individually or in box of 12. Select your packaging below:

Reference: GRAISSE-JOINT

Rubber gasket grease - 1kg

Optimize the maintenance and durability of rubber seals with our Rubber Seal Grease - 1kg, a product specially designed for bodywork professionals and garages. Applications: Ideal for maintaining door, trunk and windshield seals. Protects seals subjected to extreme thermal variations, UV and chemical exposure. Reduces squeaking and improves joint...

Reference: L3090

LOCTITE 3090 two-component instant adhesive

Two-component fast-curing adhesive. Universal use. High gap-filling capacity (5 mm). For professional repairs. LOCTITE 3090 is a fast- curing, two-component adhesive with excellent bonding performance, making it suitable for a wide range of substrates, including plastics, rubber and metals. Its gel consistency prevents the adhesive from running, even on...

Reference: S-120

4.5M butyl sealant strip for automotive glass for windows

Butyl mastic sealant is a flexible, non-polymerisable synthetic elastomer-based butyl mastic with a wide range of applications, providing a watertight seal between manhole covers. For bonding glass, motorhome skylights, louvres, doors, etc. Diameter: 9.5 mm Length: 4.5 m Colour: black Packaging: Rn roll

Reference: BOB-CHAM

Cleaning paper made of cellulose wadding (2 rolls of 1000 sheets)

  Wadding cleaning paper PEFC certification, PEFC Label.     Suitable for food contact     Controlled consumption thanks to sheet-by-sheet distribution.     Sheet dimensions: 340 x 257 mm - perforated.     Roll length: 350 m     Diameter of the roll: 30 cm     Grammage: 2 x 19g/m².     Pack of two rolls of 1000 sheets = 2000 sheets Sold in sets of 2...

Reference: GL-1153

Windshield bonding cartridge heater and cooler -12V/24V and 230V

TEMPERATURE CONTROL DEVICE FOR PB glue cartridges and cans in 12 or 24 V DC and 230 V AC keeps cartridges at the right temperature, cigarette lighter connection. Input voltage (AC), [V]: 220-240 Input voltage (DC), [V]: 12/24 - Cools down to 27 ºC below ambient temperature and heats up to +65 ºC - Active battery protection prevents deep discharge of the...

Reference: KIT-PLV

Special VBSA point of sale kit - Free

Our POS kit is free, so don't hesitate to ask for it. POS kit containing: - A VBSA general range desk mat - A mouse pad - A special windshield gluing poster (methodology) - A windshield repair poster (methodology) - A special windshield tools poster - A special windshield decontamination poster - Samples of windshield seals

Reference: POSTER-CPB

Windshield bonding process poster

Windshield bonding process poster ( including technical different steps ) for a proper use Available for export only with a product order. No delivery possible on its own

Reference: DEC-50

Foam sponge for decontaminating silicone before windshield bonding - Bag of 50

This decontamination process is imperative if the windshield bonding is to last. The thermoformed packaging produces a chemical reaction on your windscreen, making it difficult to bond without a decontamination step before bonding. Thermoforming is carried out under a source of heat, which causes an excess of silicone on the surface, preventing the...

Video

Click on a thumbnail to load the video