• Banner

  • Banner

BODY REPAIR

BODY REPAIR

There are 120 products.

Showing 1-100 of 120 item(s)
Active filters

Reference: 252

Waterproof white grease

Waterproof white grease for moving parts.Thixotropic lubrificating grease for parts that undergo intense stresses, shocks and vibrations.Excellent grip. Suitable for all moving parts.Waterproofs the surface. Has excellent anti-corrosive properties. Does not alter rubbers.Resists up to a temperature of + 150°C. Long-lasting protection film after the...

Reference: 394

Black matt laquer spray - sanding guide

Acrylic base paint characterised by a short curingtime, a high hiding power and a good grip. Its pigmentation allows to get the same colour asbefore.Its specificity is the fact that it can be used as a sanding guide. Since it is adaptable, it can be used in various fields, such as coach-work, industry, and also housing, etc... 400ml aerosolCARTON OF 12

Reference: 400

Sheet metal sealant sprayable

This product is pulverised with a spray gun. Mono-component product that cures with the humidity of the air. It respects the original finishing, joint and ripple effects can be made, etc... It is used to do the sealing of 2 metal bodies. One can paint in the 3 hours following the application of the product wet on wet. This product does not contain any...

Reference: 401

Sheat metal sealant brushable

Used to piece together body parts such as floors, luggage compartments, shock-absorber-heads, sheet overlappings, engine compartments, etc... It guarantees the water-resistance of these parts. To be applied with a paintbrush. Short curing time. Does not crack, even if it is very thick. Permanent stretch. Keeps the marks of the paintbrush and the original...

Reference: 443

Zinc spray anti-corrosive

Rust-preventive product with long-lasting qualities. Grips on any metal surface, water- resistant. Since it is made of zinc (95%) and synthetic resin (5%), the level of protection is very high. In fact, the zinc guarantees the rust-proofness and the cathodic protection of the metal surface while the synthetic resin protects the metal– Conductor between...

Reference: 452

Multi-purpose contact adhesive 400ml

Multi-purpose neoprene contact bond with excellent ageing properties, resists to heat, easy to use.Used to stick parts in wood, laminated sheets, glazed edges, plastic, leather, textile, cork, parts made of non-rigid (?) foam, PVC, metals, ceramic and many other materials.CARTON OF 12400ml aerosol

Reference: 455

Cyanoacrylate adhesive

Cyanoacrylate bounding with a very short curing time, it can be used in many different applications It has excellent filling properties. It is used to bond plastic, rubber, metal, leather, wood,ceramic, etc.CARTON OF 1220g bottle........

Reference: 460

Butyl sealant for rubber gaskets

Butyl sealant for all kinds of windows with or without moudings. Multi-purpose product: it can be used for the sealing of components that have been spot welded or removable components (e.g. sunroofs). Permanent elasticity. Resists against ultra-violets.Contains a high percentage of dry extract.Colour: black- 310ml cartridge

Reference: 5555

Self adhesive sound- deadening panels plate

Auto-adhesive self adhesive sound-deadening panels plate. Self adhesive sound-deadening panels and anti-vibra-tion protection of the floors, doors, lug-gage compartments, bonnets, etc... Very malleable. Grips very well. Adapts to the shape of the support.Compatible with car paints.Resists to heat up to +80°C.Ready-cut: 250 x 500mm.Thickness: 2,1mm...

Reference: 7230

Multi-purpose cleaning product

Cold cleaning product for engines, brakes, of clutches, carburettors, pumps. Easily degreases metal, windows, ceramics, silicone, grease and other impurities, without favouring the appearance of dust. Does not contain any chlorinated derivatives, lead, cadmium, nickel such as polychloro-biphényle. Excellent cleaning product. CARTON OF 12

Reference: BOB-FIBRE

Cleaning towels « Ecological »

NEW CLEANING TOWELS «  ECOLOGICAL » Advantages : -No decoloration -No délitage ou peluchage -Plus absorbante que la bobine chamois -2 x 1000 sheets -Dimensions : 30 x 22 cm -Total weight : 4,8 kgs -Raw material : Cellulosic fiber -Number of sheets : 1000 per roll -Color : Havane -Height of the sheet : 22 cm -Length of the sheet : 30 cm -Number of layers...

Reference: BODY400

BODY 400 spray gun + nozzles for filler sprayable

Body 400 spray gun designed for the pulverisation of the MS filler. The pressure and the throughput of the product are adjustable. It weighs 1kg , it can be used for a pressure ranging from 3 to 8 bars.Many nozzles are supplied with the spray gun so as to obtain the best joints.

Reference: CEB-10

Cloth rags 10kg

Cloth ragsWhite polycotton cloth 10 kg.Textile recycling, garment container.Composed of shirts type fabrics,Sheet... mostly white polycotton.

Reference: CEJYB-10

Cloth rags 10kg 100% coton

White Jersey cloth 10 kg.More absorbent fabric.Textile recycling, garment container.Composed of fabrics such as undershirts, t-shirts and all othertypes of white mesh jersey 100 % cotton.Dimension: 60x60 or 80 x 80cm.

Reference: CHAMB

Microfiber

Appropriate for cleaning operations. High technology, does not wear out.Replaces chamois leather, polishing cloths, can be put in the washing machine without water softener. Used for car windows, the polishing of cars, as well as to remove the polish and the lustre.

Reference: DINI1

Dini spray gun

Supplied with a full range of hose nozzlesso as to meet the needs of everyone. For traditional applications. Appropriate for cavity wax, the underbody of body shells.Anti-grits. 2 applications. , that is to say one box of 1L or a full jar.

Reference: EMB-REM5

Emblem Press &Mount !

When doing a bodywork repair, the emblems are being disposed of in most of the times and have to be repurchased. We have the solution for you : Emblem Press & Mount !

Reference: HKD1

Hkd1 spray gun

Designed for the application of products forcavity wax and underbodies. Suppliedeither in a box of 1L or in a small drum. Fulldevice supplied, with hose nozzles. Cavitywax of Ø 8 mm. For the products for under-body, has to be used as such, without usingthe hose nozzle. Gives a granular finishing.The product flows in a jar.

Reference: L110

Dispenser for masking paperer

Dispenser for masking paper réf : 200 x 4 ; 450 x 4, 700 x 4, 900 x 4 and réf 9741 Accepts differents height of rolls up to 1400 mm. It is possible to adjust the height in order to lock the roll to the wish height. Could be use on horizontal or vertical position. Film is not include with the dispenser.

Reference: L400

Black satin laquer spray

Satin black paint characterised by a short curing time, a high power to cover the surfaces and a good grip when it is applied. Its pigmentation allows to get the same colour as before. Since it is adaptable, it can be used in various fields, such as coach-work, industry, and also housing, etc... - 400ml aerosol CARTON OF 12

Reference: MB-001-05

Thick black steel brush - 23 mm

BELT, COARSE,BLACKRemoves undercoatingand seating compounds.Particularly suitable for areaswith weld seams contours and edges. Sandblasteffect.Bristles: Ø 0.7 mm steel, angled, tips ground andheat treated.23mm - Pack of 5

Reference: MB-007-05

Fine blue steel brush - 23 mm

BELT, STAINLESSSTEEL, FINE,BLUERemoval of paint andcorrosion on aluminumbodjes and superstructures, particularly in theriveting area of truck bodjes: adapts well tocontours. No sandblast effect.Bristles: Ø 0.5 mm stainless steel, straight bristles.23mm - Pack of 5

Reference: MB-011-05

Thick blue steel brush - 23 mm

BELT, STAINLESSSTEEL, COARSE,BLEUSame as MBX® belt,stainless steel fine, but withsandblast effect for surface to be roughened.Bristles: Ø 0.5 mm stainless steel, angled, groundtips.23mm - Pack of 5

Reference: MB-020-05

Thick black steel brush - 11mm

BELT, COARSE,BLACKRemoves undercoatingand seating compounds.Particularly suitable for areaswith weld seams contours and edges. Sandblasteffect.Bristles: Ø 0.7 mm steel, angled, tips ground andheat treated.11mm - Pack of 5

Reference: MB-030-05

Thick blue steel brush - 11 mm

BELT, STAINLESSSTEEL, COARSE,BLEUSame as MBX® belt,stainless steel fine, but withsandblast effect for surface to be roughened.Bristles: Ø 0.5 mm stainless steel, angled, groundtips.11mm - Pack of 5

Reference: MB-031-05

Fine blue steel brush - 11 mm

BELT, STAINLESSSTEEL, FINE,BLUERemoval of paint andcorrosion on aluminumbodjes and superstructures, particularly in theriveting area of truck bodjes: adapts well tocontours. No sandblast effect.Bristles: Ø 0.5 mm stainless steel, straight bristles.11mm - Pack of 5

Reference: MEP2

Product title

BODY PANELSPROTECTION SETSet of 2 body panel protections inmagnetized plastic. Protect againstsanding, hurting of the paint.Ref. MEP2

Reference: NET-DISK

Magnet microfiber to clean sanding paper

Magnetized microfiber to clean sanding paper. Thanksto its quality of absorption of sanding residus, the operatorwill reduce the consummation of sanding paper. Place themagnitized microfiber on the side of the area to sand, justmake oftenly some pass on the microfiber during sanding.Ref. : NET-DISKPackaging : Sold individually

Reference: PB-1349

Brand: REPAREGLASS

Cleaning towels

Very resistant 26.5 x 31.0 approx.They are specially suitable to remove polyurethane, grease and dirt from your hands. Moreover, they leave an agreeable lemongrass odour.Once your hands are washed, there is enough cleaning agent remaining on the towel for the cleaning of tools, tool box, workbenches or other surfaces- including most of plastic...

Reference: PSP150

PARKING SENSOR PADS

PARKING SENSOR PADS The function of the sensor pads is to mask the parking sensors during the sanding and painting repair process. The round shape Ø18mm with a pulling liner makes easy the removal and avoids the paint from peeling off. The aim is a fast and effective maskingwith perfection. The box contain 150 units (15 strips of 10 pads).

Reference: PSP150

PARKING SENSOR PADS

PARKING SENSOR PADSThe function of the sensor pads is to mask the parking sensors during the sanding and painting repair process. The round shape Ø18mm with a pulling liner makes easy the removal and avoids the paint from peeling off. The aim is a fast and effective maskingwith perfection. The box contain 150 units (15 strips of 10 pads).NEW

Reference: RC800

Rust converter

Rust-converter without solvent containing copolymer latex and organic agents that react when in contact with rust.Actively changes the rust that is on the substrate into an organic complex of stable iron.When curing, it repels oxygen and humidity by forming an anti-corrosive joint. Extremely low toxicity. Does not contain any phosphoric acid or lead.Forms...

Reference: SL210

Car Cleaner

CAR CLEANERRemoves the film of dirt and cleans in-depth.Its grips the body thanks to an electrostaticeffect : particles have a superficial negativeelectric charge ; they are attracted tothe sheet, which holds them, as if it was amagnet. A traditional cleaner and a rinsewith a water-jet (even of high pressurecannot remove this film. Dilute the carcleaner...

Reference: SL30

Car cleaner

Removes the film of dirt and cleans in-depth. Its grips the body thanks to an electrostatic effect:particles have a superficial negative electriccharge; they are attracted to the sheet, whichholds them, as if it was a magnet. A traditionalcleaner and a rinse with a water-jet (even of highpressure) cannot remove this film. Dilute the car cleaner from 8 to...

Reference: TOILE109

Glass fibre mat

Glass fibre mat designed to repair holes on parts of the body and synthetic materials that are reinforced with glass fiber of a high level of mechanicalresistance.

Reference: UBE

Ube spray gun

S’adapte sur les boîtes de 1 litre de produits Corps Creux et Sous-Chassis, livré avec sa buse corps Creux, gicleur 360° et buse sous-chassis. Réf. : UBE1

Reference: VB20010005

Produit de nettoyage extérieur pour une utilisation extérieure

OUTSIDE CAR CLEANING PRODUCT OUTSIDE CAR CLEANING PRODUCT1 pail = About 150 vehicles.Universal cleaner with a high efficienceresult.It is the product car cleaner companycannot afford to miss in his inventorywash, reniew and prepare of the vehicles.Endowed with anticorrosion additive andan active-tensio especially designedfor automotive field. Alcalin...

Reference: VB2020005

Produit de nettoyage intérieur pour une utilisation intérieure

INSIDE CAR CLEANING PRODUCT INSIDE CAR CLEANING PRODUCT1 pail : About 150 vehicles.Allows to clean everything inside thecar. It is an universal product and can beapplied in every areas to be clean : Fabric,plastic, leather, metals, glass…It is the product car cleaner companycannot afford to not have in his inventory.To be used with a brush.Wipe with a...

Reference: VBCYC-1

PISTOLET PNEUMATIQUE DE NETOYAGE

CLEANING PNEUMATIC GUN Pneumatic gun. Clean inside and outside the vehicles.Spray and dry functions. Ideal for a fast and complete cleaning (trapped areas, seats, roof carpets, floors, etc...) Ref. : VBCYC-1 Technical characteristics: Connector 1/4Air pressure 90 psi/ 6.3 barAir consumption 188 l/minWeight 0.67 kgSound emission pressure (LpA) 87.86 dB (en...

Reference: 440

Anti - stonechip gray

Sound-deadening product, anticorrosive, permanent elasticity, of original texture. Can be painted. Protects the underframe of the vehicle, wheel wells, spoilers and supports. Protects against rust and grits. 2-in-1 product: can also be used as a sprayble (UBE, HKD1 or DINI spray gun). Grey - 1 Liter Réf. 440-1 - CARTON OF 12 - Aérosol Réf. 440-500 -...

Reference: 445

Anti - stonechip black

Sound-deadening product, anticorrosive, permanent elasticity, of original texture. Can be painted. Protects the underframe of the vehicle, wheel wells, spoilers and supports. Protects against rust and grits. 2-in-1 product: can also be used as a sprayble (UBE, HKD1 or DINI spray gun). Black - 1 Liter Réf. 445-1 - CARTON OF 12 - Aérosol Réf. 445-500 -...

Reference: 450

Multi-purpose contact adhesive 1kg

Multi-purpose neoprene contact bond with excellent ageing properties, resists to heat, easy to use. Used to stick parts in wood, laminated sheets, glazed edges, plastic, leather, textile, cork, parts madeof non-rigid (?) foam, PVC, metals, ceramic and many other materials.CARTON OF 12- 1kg box

Reference: 783

Cockpit spray

This product renovates all plastics leaving a mat shiny. It has some anti-static properties, waterproof and dustproof. Used in the industry, the automotive and the con- struction trade. CARTON OF 12 500ml aerosol

Reference: 1024

Brand: REPARCHOC

Restructuring product for plastic parts black 400ml

Allows to get back the original granular aspect of repaired plastic parts of vehicles (such as bumpers, spoilers, lateral sticks, etc). Has to be used before the painting. Suitable for all plastic paints and especially our paints for plastic parts. Does not require any primer, provided that the part to be painted is perfectly clean and has undergone a...

Reference: 1034

Polyester resin

Specially designed for glass reinforced plastic repair. Good grip on metals, plastic, etc... Non rigid, short curing time.Can be used even if the temperature is low.CARTON OF 61 kg box

Reference: 1942

Restructuring product for plastic parts grey 400ml

Allows to get back the original granular aspect of repaired plastic parts of vehicles (such as bumpers, spoilers, lateral sticks, etc). Has to be used before the painting. Suitable for all plastic paints and especially our paints for plastic parts. Does not require any primer, provided that the part to be painted is perfectly clean and has undergone a...

Reference: 2105

Ant silicone degreaser before painting 5l

Ant silicone degreaser.Does not contain any CKW (?) and chlorinated derivatives.Cleans on the surface. Short curing time. Entirely removes silicones, greases, oils before the painting of vehicles. Easy cleaning, before the painting, of thesanding dust, base coats, as well as films of oils andgreases (forming silicone), so as to obtain cleansurfaces before...

Reference: 2130

Ant silicone degreaser before painting 25l

Ant silicone degreaser.  New packaging!Does not contain any CKW (?) and chlorinated derivatives.Cleans on the surface. Short curing time. Entirely removes silicones, greases, oils before the painting of vehicles. Easy cleaning, before the painting, of the sanding dust, base coats, as well as films of oils andgreases (forming silicone), so as to obtain...

Reference: 3706

Fibre glass filler

Polyester filler reinforced with fibre glass designed to fill deep irregularities and repair perforated non-loadbearing body parts. Direct application on metal surfaces. Very good filling. Excellent grip. Permanent elasticity.Easy sanding.CARTON OF 6 2 kg box

Reference: 3722

Metal aluminium filler

Polyester filler with aluminium particles, designed to fill irregularities on the surface. Non-porous, easy to work. Can be sanded very well with minimum dustresulting from the sanding. CARTON OF 6 2 kg box

Reference: 7280

WATERLESS CLEANER

Réf. : 7280 The cleaning of the car is done without water, without pollution. It cleans the body of the car ( mosquitos, tar, pollution, resin from the trees, etc… without remaining any mark of drying. Final aspect: The car shine CARTON OF 6