• VBSA awarded ECOVADIS label

  • Banner

Windshield lifting
Your SHIELD REMOVAL equipment at VBSA - France

Windshield lifting

Discover our selection of dedicated windscreen removal tools and accessories, designed for automotive repair professionals. This specialized equipment enables you to remove windscreens safely and efficiently, while minimizing the risk of vehicle damage.

Our windshield removal tools are made from robust, durable materials, guaranteeing precise handling and high-quality work. Whether you need cutting knives, cutting wire or other specific instruments, our range offers you everything you need to carry out removal in the best possible conditions.

With ergonomic, easy-to-use tools, you can ensure fast, safe work, whether for a windscreen replacement or a more complex repair. Improve your operations with our windshield removal equipment, designed to meet the requirements of professional workshops.

There are 234 products.

Showing 1-100 of 234 item(s)
Active filters

Reference: 3307

Handle: EQUALIZER® Ninja pneumatic knives

The EQUALIZER® Ninja pneumatic knife handle is a replacement part designed specifically to restore or improve the grip of your tool. Robust and ergonomic, it allows you to maintain optimal control of the knife during cold cutting, even in the most complex areas. Features: Exclusive compatibility: designed exclusively for the EQUALIZER® Ninja model...

Reference: 3007-K

Adjustable REPAREGLASS cold knife

The adjustable REPAREGLASS cold knife is designed to offer efficiency, speed, and precision when cutting. Thanks to its adjustment lever, you can extend or retract the blade in one simple movement, easily adjusting the cutting depth without having to unscrew the retaining nut. No more wasted time: this innovative system saves you considerable time while...

Reference: 3007-RK

Handle for 3007-K and 3008-K

Designed to ensure a good grip and optimal control of the tool, this handle can replace the original handle supplied with the 3007-k and 3008-k cold knives in case of breakage.

Reference: 3008-K

REPAREGLASS adjustable cold knife

The new REPAREGLASS cold knife offers an optimized grip thanks to a handle grip inspired by standard cold knives, for enhanced comfort of use. Lighter, thinner, and smoother than the 3007-K model, it ensures excellent maneuverability during cutting. The blades are adjustable, allowing you to set the depth according to your needs for precise work. Easy...

Reference: AB10

9 mm snap-off blades for ol30 knives

9 mm Snap-off blades forOL30 knives (Package of 10 pieces) Olfa®knife Standard knives with a wide 18mm blade are generally too wide to accomplish fine jobs. With its retractable blade of 9mm wide, this knife allows a fine cutting with one hand. - 85 x 9 x 0,4 mm - 38 g (Package of 10 pieces)

Reference: DESTOCK-AC1006

Drop Jaw Glass pliers

REF-AC1006For those of you who are cutting glass or getting ready to start,we are offering both of the most popular glass pliers used inthe Auto Glass industry. Our straight Jaw glass pliers measure20 cm length and have a flared jaw that goes from 1,27 cm atthe swivel to 2,54 cm at the tip. They are cast from steel andthen machined to a smooth finish in...

Reference: DESTOCK-AF1009

Self oiling glass cutter

REF-AF1009Self oiling glass cutterDue to the translucent color, you can see how much oil is inthe cutter. It has an end cap with a seal so the oil will not leakfrom the end of the cutter.They are of the highestquality and havebecome one of themost-used glass cuttersin the world.• Sold individually

Reference: AIG-125

T-handles wire threader

Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.- 120 x 26 x 10 mm - 20 g

Reference: AIG-300

Wire guide

The wire guide's long, narrow shaft allows positioning the wire so it prevents the dash and interior mouldings from being damaged. Recommended above all for cars with a high windshield slope or with a bottom window bond that is hardly accessible. Of course, the wire guide can also be used from the outside.- 350 x 38 x 38 mm - 220 g

Reference: AIG-730

T-handles wire threader

Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.- 120 x 26 x 10 mm - 20

Reference: AIG-789

Straight wire threader

Many technicians remove windshields by starting the wire through the top and bottom center of the windshield, then cutting towards each side. So as to push the cutting wire into the urethane, especially where there is a wide surface of urethane, we recommend using the wire threader. The slot (1,2 mm only) and the cutting wire are pushed together into the...

Reference: AP-6205

Tool declipsor

Tool declipsor SPRINGERTOOL The distinct precision curvature of the Springer Clip Removal Tool provides a varaible load distribution, safely moving the load point along the tool as more leverage is applied The tapered tip allows entry under closely fitted parts and the rounded edges avoid damage to the trim or vehicle. No matter a body shop you will be...

Reference: AST-120

Telescopic magnet

Telescopic magnetWhen you work above all in the door or chassis frame of the vehicle, a screw may fall and it may be impossible to pick it up with your fingers. With this telescopic magnet, you no longer have this problem. The telescopic device is extendable from 12 (corresponding to the size of a ballpoint pen ) to 60 cm. The strong magnet is capable to...

Reference: BAT-FSC1.7

Old Li -ion battery for FEIN battery knife (before 2024)

This 18 V - 2.4 Ah Li-ion battery is specially designed to power FEIN battery-powered knives of previous generations. Offering reliable and consistent performance, it is ideal for extending the life of your compatible FEIN tools. Key features: Li-ion technology: Ensures stable autonomy and fast recharging. 2.4 Ah capacity: Optimized for work requiring...

Reference: BOB-1.5-ROLL-OUT

Round wire in a spool REPAREGLASS - ø 0,80 mm, 1500 ml

Round wire in a spool The round profile and the small diameter make this wire a real problem solver for todays cars with narrow gaps between glass and body. It has the same high tensile strength than the VKD-44but offers at the same time as much lower risk to damage interior linings and dashboards.679 Newtonø 0,80 mm, 1500 ml

Reference: ROLL-OUT-2000

ROLL OUT Cutting tool

Windscreen cutting kitThis cutting tool allows to one operator only to cut outwindshields from inside the car.Supplied with DVD training and complete informations.

Reference: CCR-819

EQUALIZER® cowling clip removal tool

EQUALIZER® cowling clip removal tool If expension-type cowling worked the way they were designed, you would simply unscrew the plastic screw and the clip would come out. Unfortunately, they seldom work correctly. Our cowling clip removal tool has a small sharp screw that screws into the plastic head and pulls the screw out. The clip will then collapse and...

Reference: CG-200NEW

Pneumatic knife with original blade

Designed to remove windshields quickly and easily, this pneumatic knife cuts through adhesive using a system of powerful oscillating blades. It offers excellent speed control thanks to its integrated regulator, allowing for precise work as needed. The blades can be rotated to 12 different positions, ensuring great versatility, even in hard-to-reach areas....

Reference: CG-200-GVF

Pneumatic cut-out + 6 blades

The Standard Pneumatic Rubber Cutter is designed to quickly and effortlessly remove windshields by cutting through adhesive with its efficient oscillating blades. Its built-in speed regulator allows for precise control during use, while the blades can be adjusted to 12 different positions to suit all configurations. Compact and easy to maneuver, it is...

Reference: CGE-148

Clip removal tool

Clip removal tool This tool is used to remove plastic clips on door linings. It fits easily down into the recessed area and then can slid under the head of the cowling clip. You then pull up on the center locking part and the clip can be removed. - 235 x 35 x 30 mm - 165 g

Reference: CM-536

Magnetic bowl

Magnetic bowlThe bowl can be placed almost everywhere on a vehicule because the bottom has a rubber cover to avoid scratches. The strong magnet surely holds thebowl itself and all magnetic content.Diameter:140 mm

Reference: CS-696

Clipsaver door upholstery remover

EQUALIZER® ClipSaver door upholstery remover The front of the tool is tapered so it will fit easily under a clip. Spread the jaws slightly so they will go under and around the clip. Then, close the jaws and it removes the clip without damaging it. Great for the removal of door panels. - 230 x 76 x 51 mm - 205 g

Reference: CT-749

Window and door clip removal tool

Window and doorclip removal toolThis tool is used to remove clips that are used with Opel and Ford brands, as well as with most of other vehicles that have clips.- 250 x 58 x 32 mm- 130 g

Reference: CTD-607

Recessed Cowling Clip Remover

Recessed Cowling Clip RemoverSome self-locking cowling clips are recessed down into the cowling. They are not the type that look like a Phillips or TORX®screw, but are the type that can be removed with a tool like the CGE-148. The only problem is the TPE657 will not reach downinto the recessed area and go under the head of the clip. If you manage to force...

Reference: DEV-ROLL-N-CUT

ROLL-N-CUT wire reel

A suction-cup-mounted piano wire reel, which is positioned on the windscreen and allows the wire to be inserted all around the windscreen completely independently. Not compatible with ZLN-914.

Reference: DGL-201S

Wire gripping handle with sucker

This handle can be stuck to the glass to go around the vehicles front and grab it from the other side a real good idea and a really handy tool!

Reference: DLH-511

Double-end moulding release tool

Double-end moulding release tool This heavy-duty tool is made of steel so it will not bend. It has a small rubber spacer through each end to the tool up off the glass about 1 mm. This is important for two reasons. First, it prevents the tool from scratching the glass. Secondly, it holds the end above the glass so there is less chance the tip will catch...

Reference: DPO-585

Rivet Stem Remover

Rivet Stem Remover It is often necessary to remove dor glasses without breaking them. Drilling out the rivet so you can remove the door glass is easy if you can remove the rivet stem. Rivet stems are made of steel and are impossible to drill out. Our rivet stem remover has contoured end so it will sit over the rivet and align perfectly with the rivet...

Reference: DST-734

T-handle wire threader with hole

REF-DST-734 T-handle wire threader with hole Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.120 x 26 x 10 mm • 20 g

Reference: DST-734BUS

T-handle wire threader special bus and trucks

Special wire threader for bus and trucks with 2 holes ( for square or braided wire and nylon wire.) The end of the needle has a special designed in order to introduce easy the wire through the urethane. Push it in the urethane, insert the wire inside the tube, remove the wire threader and lead the wire throughout the urethane, in order to be able to pic...

Reference: EWA-1702

Windshield wiperarm removal tool

Extremely loadable. Made of massive metal. Can be used on virtually any passenger and commercial vehicle. Specially recommended for the BMW 5 and BMW 7 series.- 104 x 38 x 140 mm- 518 g

Reference: FSC-300SPECIAL

Brand: REPAREGLASS

Special scraper

REF. FSC-300SPECIALSCRAPER (without blade)To scrape the old urethane bead. This scraper is universal due to thefact it can accept different blades width ( 13 mm – 16 mm – 20 mm)and angular blades

Reference: FSC-350

Brand: REPAREGLASS

Special scraper

REF. FSC-350SCRAPER (without blade)To scrape the old urethane bead. This scraper is universal due to thefact it can accept different blades width ( 13 mm – 16 mm – 20 mm)and angular bladesIts locking system with roll allow a quick and easy blade replacement

Reference: FSC1.7

FEIN electric knife - without blades

The FEIN electric knife is the ideal tool for automotive glazing professionals looking for efficiency, precision, and comfort. Designed for intensive use, it stands out for its lightweight, maneuverability, and advanced features that make even the most demanding cuts easy. Included: FEIN electric knife Sturdy carrying case for convenient storage ⚠️ Blade...

Reference: FSC1.7L

FEIN electric knife + 12 blades

Discover the FEIN electric knife, a must-have tool in the automotive glazing industry. Designed for professionals, this knife combines power, optimized ergonomics, and cutting precision, all with exceptional maneuverability thanks to its low weight. Included in the kit: FEIN electric knife 12 cutting blades: 2 x REF-FB212 3 x REF-FB207 2 x REF-FB208 1 x...

Reference: FSL240

Pinchweld scraper with interchangeable blade

Pinchweld scraper with interchangeable bladeThis may be the last pinchweld scraper you will ever buy! From now on.You may just buy blades. When the blade finally wears out, remove the two screws, pull out the old blade, drop in a new blade and tighten the two screws. These pinchweld scrapers are made of spring steel and are hard enough so they will not...

Reference: GCC-506

Glass run channel cleaner

Glass run channel cleanerIf you have ever cleaned glass out of a glass run channel, you know the problem. Broken pieces of tempered glass will hide behind the lip of the glass run chanel and scrape the door glass when you roll it up or down. The glass run channel cleaner reaches behind that lip to remove even the most stubbornly-wedged pieces of glass...

Reference: GRAISSE-JOINT

Rubber gasket grease - 1kg

Optimize the maintenance and durability of rubber seals with our Rubber Seal Grease - 1kg, a product specially designed for bodywork professionals and garages. Applications: Ideal for maintaining door, trunk and windshield seals. Protects seals subjected to extreme thermal variations, UV and chemical exposure. Reduces squeaking and improves joint...

Reference: H1

Long Olfa®

Olfa® knifeKnife with a snap-off blade, 25 mm and 0,7 mm wide.The blade can be outside its housing up to a length of 10 cm and a thumb locking screw allows you to lock the blade in any position.Back of the knife features a rubber grip that lets the knife rest comfortably in your hand and keeps it from slipping.- 172 x 34 x 25 mm - 155 g

Reference: H600

Cutter 9 mm

9 mm cutter - supplied without bladeCompatible blades: Ref.AB-50S

Reference: JCS452

Compact C-clip remover

Compact C-clip removerC-clip removers are an item that every technician has inhis toolbox, but those C-clips removers will not alwaysfit into the tight spots and compound curves on somevehicles. The Compact C-clips remover has a flat designthat will let you use it from all sides. This handy tool isdefinitely one that no technician should be without.REF....

Reference: JPB391

Plastic razor blades

Plastic razor bladesThese plastic razor blades are suitable to remove stickers andlabels from glass surfaces.As the blade is made of plastic it cannot scratch the glass contraryto a metal blade that could.Box of 100 blades

Reference: L2

Olfa® knife

Olfa®knife This knife is made of high impact plastic, has a stainless steel blade housing and a positive locking thumb wheel so that you can set the blade at any length. The back of the knife features a rubber grip that lets the knife rest comfortably in your hand and keeps it from slipping. The famous model. - 146 x 40 x 20 mm - 110 g

Reference: LB10S

Rigid segmented blades for L2 and XL2 knives

Optimize your cuts with these segmented rigid blades, specially designed for use with L2 and XL2 cutters. Applications: Perfect for meticulous bodywork and mechanical work. Ideal for cutting plastics, rubber, fabrics and other materials used in the automotive industry.

Reference: LFA-402

Flexlight bulb

flexlight mini torch with flexible shaftA screw has been lost? There is a leak in the engine compartment? A connector is hidden under the dash? This mini torch with flexible shaft will give you the needed light-in dark or hidden places. It can even become one of the most useful tools to you. Needs two LR6/AM3/AA batteries (delivered without batteries ).-...

Reference: DESTOCK-MBV-SHE

Life hammer for breaking glass and cutting belts

REF. MBV-SHELife hammer 2 in 1This life hammer allows to break the tempered windows, its ceramic head will break the windowautomatically. Easy to use not only for adults but also for children by a secure way.This life hammer is used also to release persons from the security belt in case of automotiveaccident, thanks to its integrated blade

Reference: MK201

Lockout tool set

REF. MK-201Lockout tool setIt can easily happen that you lock yourself out, while working on customer cars. This setallows to solve this situation. Open the car door without damaging the paint, moulds andliners.. The tool kit is supplied with instruction manual.Careful, this set will not work on recent vehicles with electronically controlled locking systems

Reference: MRL6

Mini scrapers

This scraper can be carried in the pocket - no risk of injury.The replacement of the blade is easy and secure. When not in use, the blade is simply flipped so as to avoid any injury. When you want to use the scraper, pull the closing device, flip the blade and your scraper is ready to use!1 Package of 6 pieces.- 50 x 44 x 38 mm - 45 g

Reference: MSP-211

BOX EXTRACTOR

Arm wiper pullers kit If you remove a bolted on windshield wiper a few months after the vehicle was builtthen it is usually not difficult to remove, but try removing the wiper arm two or threeyears after it was built. It can be almost impossible because manufacturers use onetype of metal on the wiper arm and a different type of metal on the wiper post. If...

Reference: MTS-068

Hook and pick set

Hook and pick setThis set of mini hooks is very helpful to remove joints and coverings while avoiding any possible damage.This practical set contains hooks in different shapes and a pick. The length of these tools is only 13mm! - 127 x 25 x 25 mm - 280 g

Reference: NMT-448

Mechanical pick up

Mechanical pick up The use of telescopic magnet could be sometimes impossible to use because of non ferrous items. It is times like these when you need our Mechanical Pick-Up. It is designed with steel fingers that are spring-loaded that will grip an item up to 2,5 cm in diameter.

Reference: OL30

Olfa®knife, with one snap-off blade of 9mm

Olfa® knife, with one snap-off blade of 9 mm.Standard knives with a wide 18 mm blade are generally too wide to accomplish fine jobs. With its retractable blade of 9 mm wide, this knife allows a fine cutting with one hand.- 130 x 16 x 10 mm - 36 g

Reference: PAIG-200

Wire gripping handles (corkscrew shape)

Wire gripping handlesIdeal solution to work rapidly and without problem. Feed the wire through the hole in the wedge shaft (fig A), loop it through the hole at the top of the shaft (fig B) and then bring it back into the large plastic handle. By pressing the wedge back into the handle, the wire is held in place (fig C). To shorten the wire, press down on...

Reference: PH-1355

Spatula curved to remove the clips

Curved Door Upholstery Remover For removing plastic fasteners in confined places. It is the same upholstery remover as the one shown above, but it is instended for use on the front part of the door where the door jam will often interfere with the removal of the door panel. Place the notch in the tool over the fastener and pry the fastener out the hole. It...

Reference: PRO-LAV

Special protector part to protect glass cleaner sprayer solution

REF. PRO-LAVMany of the wipers system includes a glass cleaner sprayer solution.The hose is integrated to the arm wiper and runs thanks to its movements. The sprayer couldbe damaged with an arm wiper puller. The tightning nut of the puller has to be located on the specialprotector of the center area of the cleaner sprayer. Untight the bolt which is...

Reference: PS-12

Parer blades 12mm

Parer blades (scraper not include)REF-PS-12 Blade 12 mmThese parer blades are especially good for cleaning the pinchweldfrom excessively applied polyurethane in curves and corners.Thereby the special shape reduces the risk of damaging the paintcompared to standard scraper blades. The blades are suitable for ourscraper tools FSC-300SPECIAL and FSC-350...

Reference: DESTOCK-PS-215

Glue joint smoother/extractor

Simplify your finishing and joint removal jobs with this versatile tool designed for professionals. Key features: Dual function: Allows you to even out glue joints for a perfect finish and easily remove joints (silicone, PU). Convenient use: work is performed with one hand, saving time and facilitating handling. Precision and cleanliness: Guarantees...

Reference: PSD12

Parer blades diam.12mm

Parer blades (scraper not include) REF-PSD-12 Blade diameter 12 mThese parer blades are especially good for cleaning the pinchweldfrom excessively applied polyurethane in curves and corners.Thereby the special shape reduces the risk of damaging the paintcompared to standard scraper blades. The blades are suitable for ourscraper tools FSC-300SPECIAL and...