Reference: Z9
Cold knife blade coated, extra fine 38 mm
Cold knife blade coated, extra fine - Sold individually- Cutting length: 38 mm- 20gCARTON OF 10
There are 251 products.
Reference: Z9
Cold knife blade coated, extra fine - Sold individually- Cutting length: 38 mm- 20gCARTON OF 10
Reference: Z9RV
Nylon coating protects exposed paint from accidental blade contactIdeal for exposed glass with underside molding or encapsulationOffers the control a technician needs to cut awayfrom the glass or moldingAvailable in 3 lengths : 19 mm – 25 mm – 38 mm
Reference: RAPTOR
The Raptor™ is a cord and wire auto glass removal device designed from the ground-up to dramatically improve the power of the vacuum cup with the integration of our AirForce™ Constant Vacuum Cups. This technology has been specifically developed to create a quick placement and constant vacuum to the glass so the Raptor™ stays in place and resists...
Reference: DSS-175
One-man wire cut-out toolREPAREGLASSOne-man wire cut-out toolThis tool acts like another person sitting inside the vehicle pulling the wire back after you havemade your cutting stroke.Attached to the swivel is a spring that acts as a second person; you pull the wire out to make your cut and the springs pulls the wire back in. The spring is attached to a...
Reference: EES804
EQUALIZER® sheath 100mm The sheath is the unique, patented idea that makes the EQUALIZER® line of tools work. The sheath is a protective sleeve that surrounds the blade will not damage the dash or garnish mouldings. Sheaths are available in the three sizes: 10,20 and 30cm. The smallest one is generally used to surround small side windows. The middle size...
Reference: EES808
EQUALIZER® sheath 200mm The sheath is the unique, patented idea that makes the EQUALIZER® line of tools work. The sheath is a protective sleeve that surrounds the blade will not damage the dash or garnish mouldings. Sheaths are available in the three sizes: 10,20 and 30cm. The smallest one is generally used to surround small side windows. The middle size...
Reference: EES812
EQUALIZER® sheath 300mm The sheath is the unique, patented idea that makes the EQUALIZER® line of tools work. The sheath is a protective sleeve that surrounds the blade will not damage the dash or garnish mouldings. Sheaths are available in the three sizes: 10,20 and 30cm. The smallest one is generally used to surround small side windows. The middle size...
Reference: EGK150
Air-powered cold knifeThe Equalizer Ninja and Ninja GT are revolutionary auto glass removal tools that allow you to remove any glass fast and effortlessly. They have the look and feel of a cold knife, but cut with the power of 22,000 cutting strokes per minute. Here is how they work: the blade moves back and forth at 22,000 strokes per minute. As you pull...
Reference: ENJ147
The Equalizer Ninja and Ninja GT are revolutionary auto glass removal tools that allow you to remove any glass fast and effortlessly. They have the look and feel of a cold knife, but cut with the power of 22,000 cutting strokes per minute. Here is how they work: the blade moves back and forth at22,000 strokes per minute. As you pull the Equalizer Ninja...
Reference: ENK148
The Equalizer Ninja and Ninja GT are revolutionary auto glass removal tools that allow you to remove any glass fast and effortlessly. They have the look and feel of a cold knife, but cut with the power of 22,000 cutting strokes per minute. Here is how they work: the blade moves back and forth at22,000 strokes per minute. As you pull the Equalizer Ninja...
Reference: FSC1.7BAT
The high-performance cordless oscillating machine with rapid clamping system for automotive work. Supplied with 2 batteries and a charger -Same performance as the corded version, with maximum working speed for professional use in a variety of applications/sectors. High-performance 18 V Li-Ion batteries with charge indicator. Ultra-modern Li-Ion...
Reference: FSC1.7QBAT
The powerful system for vehicle repairs with special accessories for quick and safe removal of vehicle windows. High-performance battery-powered SuperCut developed specially for use in vehicle glazing. Complete set in high-quality tool case with the key accessories for removing the most common vehicle windscreens. Convenient accessory changes without the...
Reference: GCN-100
L: 100M 2500 NEWTON Nylon wire- Diam 1.1mm ESPECIALLY DESIGN FOR THICK AND HEAVY PU Ideal for : -Old urethane -Thick and heavy PU -Trims which must not brake ( clips – fastener – spacers) -Brakes at an high tensile strength -Reusable length ( from about 2 to 4 applications) -Do not scratch surfaces -Could be use with most of the ratchet systems...
Reference: LM-460
Long knife with 1 blade Some vehicles have extra-long dashes. So you have to cut the bond from the inside. As long as the band of urethane is not too thick, you can use knives designed to cut urethane. Two lengths are available: 46 cm (standard) and 61 cm (designed for vehicles with a high windshield slope and with ewtra-long dashes). Both are made of...
Reference: LM-610
Long knife with 1 blade Some vehicles have extra-long dashes. So you have to cut the bond from the inside. As long as the band of urethane is not too thick, you can use knives designed to cut urethane. Two lengths are available: 46 cm (standard) and 61 cm (designed for vehicles with a high windshield slope and with ewtra-long dashes). Both are made of...
Reference: ZDK-395
Cold knife with neoprene cover REPAREGLASS To prevent paint damage and for more handiness. This knife is one of the most useful tools for windshield installers. It has been used for 30 years worldwide and has hardly ever been changed during that time.One evolution had tobe taken into account though: paint jobs have become more complicated. Generally, many...
Reference: ZLN-914
- Multi-purpose with 1 length (approx. 2 to 4 uses) - Does not scratch surfaces - No snags on the windscreen bay or windscreen seal - Can be used with all ratchet systems - Very fine Ø 1.05 mm, Length: 100 M 2000 Newton
Reference: SYSTEME-PROTECTION-DE-BAIE
Everyprotector they used could not withstand repeated hits by a power tool blade and would jump out of the pinchweld,leaving the paint exposed to potential harm. Tape worked to some extent, but would not hold sufficient downward pressure tokeep the pinchweld protector in place.This kit includes 4 different lengths of a high impact metal that will absorb...
Reference: KIT-BTB
BTB range in the case: Pneumatic windshield removalVery lightweight knife: 1,1kg – Very little physical effort – Cutting of interior or exterior- Air consumption: between 30m/min and 104l/min maxi. Very silent, vibration complying with the European directive 2002/44/CEBTB kit: Contains: - 1 operating instruction- 1 CD- 1 pneumatic knife REF-WK10HD - 1...
Reference: ROLL-N-CUT
Simplified system for cutting windshields with ratchet mechanism, easy to use, perfect results. This system is exceptional in that it is designed to be used with a single suction cup, which is easy to move thanks to the regulator attached to the unit. The box includes a metal protection strip and polyethylene protectors. A suction-cup-mounted piano wire...
Reference: DST-58
Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...
Reference: DST-61
Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...
Reference: 113656
Set of 4 wheels for handble rolling tool-box (Ref. CS-RC14)
Reference: WK28RM
Right hand, inverted BTB blade, 25 mmManual or pneumatic use.
Reference: ZK45
The compact ZIPKNIFE cold knife is designed for cutting in hard-to-reach areas. Uses all standard cold knife blades Without blade.
Reference: LBB-10
Rigid blades "BLACK" segmented pack of 10 pieces for L2 and XL2
Reference: DESTOCK-UW-4018
Knife with 1 blade - steel with plastic handle, for use with TKS-100 blades
Reference: DESTOCK-WK28L
BTB knife blade, right hand, tip length 30mm BTB blades are particularly effective for cutting car windshields. Cold knife for manual or pneumatic use, ideal for easy removal of windows, mouldings, etc. They provide a fast, precise and clean cut. Technical specifications: Blade shape: curved/straight Length: 107 mm Width: 30 mm Depth of cut: 30 mm
Reference: DESTOCK-WK7L
Double handle for BTB blade - Makes it easy to cut windshield and other glazing seals. Dimensions: 190 x 38 x 38 mm
Reference: FB082-DESTOCK
Only 1 blade in stock FEIN curved blade - Z curve, with fixed depth stop Total length: 80mm - Length of cutting edge: 14mm
Reference: FB095-DESTOCK
Only 1 blade in stock FEIN U-shaped blade Edge length: 16mm Sold individually.
Reference: FB097-DESTOCK
FEIN curved blade - Z curve, with fixed depth stop Total length: 125 mm - Length of cutting edge: 58mm Unit
Reference: FB109-DESTOCK
Only 5 blades in stock FEIN curved blade Total length: 75mm - Length of cutting edge: 20/75°. Sold individually.
Reference: KZS-163
Cutting nozzle tool for windshield bonding and other applications. The nozzle clamp makes it quick and easy to make an exact V-shaped cut in the nozzle tip of the polyurethane cartridge. This is important for good work! Because a bonding line must be applied with precision. Simply cut the tip of the nozzle to the required opening width.
Reference: LING-80
LING-80 is ideal for bodywork, carpentry and public works on all surfaces.LING-80 is a wipe specially developed for professionals to remove traces and deposits of :- windshield bonding putty- aluminum or PVC joinery assembly glue- bitumen stainsLING-80 is gentle on hands. It is impregnated with a plant-based product.
Reference: PEZ-120
Brand: REPAREGLASS
The car's roof offers a convenient place to deposit tools, screws and other small assembly materials. To avoid damaging the paintwork on the roof, you'll need to use our protective canvas. It's made of vinyl and acts as a soft, non-slip cushion between the vehicle's roof and your tools.
Reference: CLEAN-SET
This set includes all the protection you need before working on a customer's vehicle. Set contents : - 1 plastic seat cover - 1 crepe floor mat - 1 steering wheel cover - 1 gearshift cover - 1 handbrake cover (can be customized by volume)
Reference: PSI-200
Double seat cover One-piece protective cover made from fully cleanable nylon (in washing machine) to cover seats, central controls and vehicle floor. Dimensions: 156 x 244cm
Reference: SGR-120
Retractable blade scraper for RK-100A and JPB391 blades