IRON CUT – Dual-Transmission Windshield Cutting System

Reference: Z7

Cold knife blade coated, extra fine 19 mm

Cold knife blade coated, extra fine - Sold individually- Cutting length: 19 mm- 20gCARTON OF 10

Reference: WFA-525

Arm wiper puller for rearwindows.

Arm wiper puller for rearwindows.To avoid to damage the arm wipersfrom rear vehicules, which are oftendamage with traditional arm wiper pullersEx: Peugeot 307-207, Renaultclio III, Espace Laguna, Megane,Nissan Micra et primera

Reference: DST-58

Curved wire threader 58 mm (package at 3 pièces)

Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...

Reference: Z10RD

New COLD KNIFE BLADES SERRATED 19mm

REF-Z10RDNew ULTRAWIZ Cold knife bladeSold individually - Extra thin Cutting length: 19 mmCARTON OF 10

Reference: CROP-S

Brand: REPAREGLASS

Pointed hook, with short shaft

Pointed hook, with short shaft- 200 x 35 x 35 mm - 122g

Reference: DST-734

T-handle wire threader with hole

REF-DST-734 T-handle wire threader with hole Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.120 x 26 x 10 mm • 20 g

Reference: CS-RC14

Handable rolling Tool-box

Toolbox on wheels Size: L:62 x W:30 x H:32 cm + 10cm in height with wheels 4 drawers of 22 x 20cm

Reference: Z60

Special cold knife blade 60 mm

This blade series enables you to use a cold knife where you could never use it before ! The 60 mm long blade is intended to cut all those hard to reach PU bondings thatare far away from the glasses edge and where a normalcold knife blade could never reach. But also all lowerglass edges with surmounting wings and bonnets are aperfect field of application...

Reference: LB10S-50

Rigid segmented blades for L2 and XL2 cutters - Pack of 50

Rigid segmented blades for L2 and XL2 cutters. Sold in packs of 50 blades. Blade size: 110 x 18 x 0.5 mm - 86 g

Reference: FSC1.7B2

FEIN battery-powered knife - without blade, with battery

Discover a powerful, precise and completely autonomous solution for your automotive work. This FEIN cordless knife is designed to meet the highest demands of glass professionals, combining mobility, performance and reliability. Technical specifications: Battery voltage: 18 V Battery capacity: 5 Ah Oscillations: 10,000 - 19,500 rpm Amplitude: 2 x 1.7°...

Reference: LH-683-N55

Lever for hubcaps - 2nd life

In average condition Only a few minor cosmetic defects appear - 1 Only one item available 2nd LIFE warranty: 6 months Removing hubcaps without the right tool can quickly damage these delicate parts. If a flat screwdriver is sometimes used, its small contact surface often causes damage and does not provide sufficient leverage. The hubcap lever solves these...

Reference: 3007-RK

Handle for 3007-K and 3008-K

Designed to ensure a good grip and optimal control of the tool, this handle can replace the original handle supplied with the 3007-k and 3008-k cold knives in case of breakage.

Reference: CAISSE-N396

copy of Storage case L: 44 cm x H: 17 cm x W: 19 cm - 2nd LIFE - N396

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Storage case Length: 44cm - Width: 17cm - Height: 19cm

Reference: OL30

Olfa®knife, with one snap-off blade of 9mm

Olfa® knife, with one snap-off blade of 9 mm.Standard knives with a wide 18 mm blade are generally too wide to accomplish fine jobs. With its retractable blade of 9 mm wide, this knife allows a fine cutting with one hand.- 130 x 16 x 10 mm - 36 g

Reference: ECL784

Cutting lubricant - 235ml

This high-performance lubricant is specially formulated to optimize the performance of your cutting tools. Suitable for all cutting devices, it effectively reduces friction between the blade and the sheath, limiting premature wear, improving cutting precision, and extending the life of your equipment. Ideal for professional or domestic use, it ensures...

Reference: GCN-100

Nylon wire - ø 1,1 mm - 100ML

The high-performance nylon cutting cord is specially designed for thick and hard adhesive beads, particularly in automotive glass replacement. It meets the latest industry requirements by combining strength, durability, and safety in a single product. Thanks to its abrasion-resistant nylon composition, it offers smooth cutting performance without...

Reference: WK4

Non-rigid, bent BTB blade, 190mm

Non-rigid, bent BTB blade, 190mm

Reference: WK24ZRS

BTB blade, 150mm for encapsulated curved glass

BTB blade, 150mm for encapsulated curved glass

Reference: AIG-300

Wire guide

The wire guide's long, narrow shaft allows positioning the wire so it prevents the dash and interior mouldings from being damaged. Recommended above all for cars with a high windshield slope or with a bottom window bond that is hardly accessible. Of course, the wire guide can also be used from the outside.- 350 x 38 x 38 mm - 220 g

Reference: CS-RC-N404

Empty Toolbox with 4 Drawers and a Removable Tray (with Wheels) – Second Life – N404

In very good condition Only a few minor cosmetic defects – Only one unit available Second Life Warranty: 6 months Empty toolbox with 4 lockable drawers and a removable top tray. Central handle + 2 side handles for easy transport. Optional: Set of 4 wheels (2 with brake and 2 without) to facilitate mobility of the toolbox. Dimensions: L: 62 × W: 30 × H: 32...

Reference: WK28RM

RIGHT HAND INVERTED BTB BLADE 25MM

Right hand, inverted BTB blade, 25 mmManual or pneumatic use.

Reference: DEV-ROLL-N-CUT

ROLL-N-CUT wire reel

A suction-cup-mounted piano wire reel, which is positioned on the windscreen and allows the wire to be inserted all around the windscreen completely independently. Not compatible with ZLN-914.

Reference: FB081

Cutting blade, cranked 60 mm

Lame à découper, courbe profondeur de coupe : 60 mm longueur totale : 85 mm vendue à l'unité

Reference: VNT-306

EQUALIZER® top notchtm tool

Urethane nozzle tool, top notchTM tool This tool allows you to cut rapidly and easily a proper V-notch on a urethane nozzle. This is important for an effective work! Indeed, before applying bond, a proper notch has to be cut. To use this tool, take a knife and cut the end of the nozzle tip to give yourself a bead. Next insert the top NotchTM tool inside...

Reference: Z3

Cold knife blade 38 mm

Cold knife blade, extra fine- Sold individually- Cutting length: 38 mm- 20 gCARTON OF 10

Reference: FB209

Hook blade with L shape - 38 mm

profondeur de coupe : 38 mmvendue à l'unité

Reference: LING-80

Cleaning wipes for putty, glue, resin...

LING-80 wipes are specially designed for professionals in the bodywork, carpentry and public works sectors and for any application on sensitive surfaces. They effectively remove traces of windshield bonding putty, aluminum or PVC carpentry assembly glue, as well as bitumen stains, while preserving the quality of your hands and tools. Characteristics:...

Reference: GCC-506

Glass run channel cleaner

Glass run channel cleanerIf you have ever cleaned glass out of a glass run channel, you know the problem. Broken pieces of tempered glass will hide behind the lip of the glass run chanel and scrape the door glass when you roll it up or down. The glass run channel cleaner reaches behind that lip to remove even the most stubbornly-wedged pieces of glass...

Reference: DST-53

Curved wire threader 53 mm (package at 3 pièces)

Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...

Reference: ULB-582

TRAPEZOIDAL BLADES (x 10 )

Trapezoidal blades ( x 10 )