VBSA awarded ECOVADIS label
Banner
Effectively protecting the windshield bay during cutting has long been a challenge for technicians. Traditional methods, such as inserting a protective shield between the glass and the bay, are often ineffective against the repeated vibrations and impacts of electric or pneumatic tools. These tools can displace or damage the protective shield, exposing the paint to the risk of damage.
This system of metal strips covered with protective tape has been specially designed to address this problem. Unlike conventional metal strips, these offer increased resistance to downward pressure, allowing them to remain in place throughout the entire operation.
The metal strips are available in four different lengths to suit all types of vehicles, including recent models without seals around the windows:
To prevent the corners of hubcaps from sticking out, they are often attached with adhesive tape. However, this method carries risks: adhesives can react chemically with the vehicle's paintwork, causing damage. The ideal solution? Our retaining tool, specially designed to secure hubcaps without compromising paint quality. Advantages : Optimum protection: Protects your vehicle's paintwork from any chemical or mechanical risk. Ease of use: Quick installation and simple adjustments for practical, efficient use. Durability: Made from resistant materials for intensive professional use. Versatility: Perfect for holding cutting protection strips, ideal for protecting the windscreen bay when cutting the windscreen. |
Retention device: metal strip and trim caps
€0.00 |
Flexible and durable, they can be bent to fit the shapes and angles of the window, while absorbing vibrations from the tools used.
Note: after prolonged use, the protective coating may wear. It is therefore advisable to check the condition of the strips regularly and replace them if necessary to ensure optimal protection.
To ensure optimal support, we recommend using at least 4 trim retainers (REF-FRE-080-P) during use. These retainers ensure that the strips properly absorb friction and impacts associated with the use of vibrating or rotating blades.
Reference: ENJ147
The Equalizer® Ninja Standard kit is revolutionizing cold cutting in the automotive glazing industry. This high-performance pneumatic knife is designed to fit all vehicle models, offering power, precision, and speed in a compact and easy-to-handle format. At first glance, the Ninja looks like a standard tool. However, its 22,000 oscillations per minute...
Reference: EGK150
The Ninja™ GT Deluxe is the improved and reinforced version of the famous Ninja™ pneumatic knife. Designed for the most demanding cold cutting applications, it features two ball bearings, a more powerful motor and an exhaust silencer that redirects air away from the vehicle for optimal working comfort. Exceptional performance and versatility: Optimized...
Reference: SB-880
When working with glass, wearing protective eyewear is essential to ensure eye safety against shards and debris. Our shatterproof glasses offer side and front protection thanks to their ergonomic design. They can be worn over most prescription glasses, ensuring optimal comfort for all users. Features: - Complete protection: Protects the eyes against...
Reference: DESTOCK-FRE-080-P
To prevent the corners of hubcaps from sticking out, they are often attached with adhesive tape. However, this method carries risks: adhesives can react chemically with the vehicle's paintwork, causing damage. The ideal solution? Our retaining tool, specially designed to secure hubcaps without compromising paint quality. Advantages : Optimum protection:...
Reference: KIT-BTB
The BTB Kit is a complete, high-performance pneumatic solution for cutting windshields quickly and efficiently, whether from inside or outside the vehicle. Designed to minimize physical effort, its ultra-lightweight knife (1.1 kg) ensures easy and comfortable handling, even during long jobs. Very quiet and compliant with European Directive 2002/44/EC on...
Reference: FSC1.7BAT
Discover an innovative, high-performance solution for automotive work, combining power, precision and practicality. Technical specifications: Battery voltage: 18 V Battery capacity: 5 Ah Oscillations: 10,000 - 19,500 rpm Weight with battery: 1.8 kg Amplitude: 2 x 1.7 Tool holder: hexagonal Please note: Supplied without blade, battery or charger. -...
Reference: DST-734
REF-DST-734 T-handle wire threader with hole Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.120 x 26 x 10 mm • 20 g
Reference: FSC1.7L
Discover the FEIN electric knife, a must-have tool in the automotive glazing industry. Designed for professionals, this knife combines power, optimized ergonomics, and cutting precision, all with exceptional maneuverability thanks to its low weight. Included in the kit: FEIN electric knife 12 cutting blades: 2 x REF-FB212 3 x REF-FB207 2 x REF-FB208 1 x...
Reference: WK10HD
The BTB pneumatic knife is the ideal tool for quick and precise cutting of windshields, both inside and outside the vehicle. Compact, lightweight (1.1 kg) and easy to handle, it significantly reduces physical effort for the user while offering optimal cutting performance. Its design reduces the risk of blade overheating and impact on the glass. Supplied...
Reference: G-KNYL
Discover protective gloves that combine comfort and precision, perfect for detailed work. Made of flexible nylon, they offer excellent dexterity while guaranteeing a secure grip thanks to their polyurethane coating. Characteristics: Flexible and snug: Fit the hand perfectly for optimal comfort Polyurethane coating: Ensures better grip and increased...
Reference: RAPTOR
The Raptor™ is a cord and wire auto glass removal device designed from the ground-up to dramatically improve the power of the vacuum cup with the integration of our AirForce™ Constant Vacuum Cups. This technology has been specifically developed to create a quick placement and constant vacuum to the glass so the Raptor™ stays in place and resists...
Reference: ECL784
This high-performance lubricant is specially formulated to optimize the performance of your cutting tools. Suitable for all cutting devices, it effectively reduces friction between the blade and the sheath, limiting premature wear, improving cutting precision, and extending the life of your equipment. Ideal for professional or domestic use, it ensures...
Reference: ESB-1304
EQUALIZER® serrated blades and sheaths – available in 100 mm versions. Designed for superior cutting performance, these saw-tooth blades are manufactured with steel teeth sharpened using a unique double serration method. This exclusive process ensures a smoother, faster, and more precise cut, even in the most demanding conditions. Compatible with...
Reference: LAME-STANDARD-EXC
Designed for glass and windshield replacement professionals, Equalizer® standard blades are made of unbreakable mild steel, ensuring flexibility of use without risk of breakage. If they become bent, they can be easily straightened with pliers, extending their service life. They are easy and efficient to sharpen using a grinder, belt sander, file, or...
Reference: FB121
Cutting blade, straightCutting length: 26 mmSold individually
Reference: BAT-FSC1.7
This 18 V - 2.4 Ah Li-ion battery is specially designed to power FEIN battery-powered knives of previous generations. Offering reliable and consistent performance, it is ideal for extending the life of your compatible FEIN tools. Key features: Li-ion technology: Ensures stable autonomy and fast recharging. 2.4 Ah capacity: Optimized for work requiring...
Reference: EGK150
The Ninja™ GT Deluxe is the improved and reinforced version of the famous Ninja™ pneumatic knife. Designed for the most demanding cold cutting applications, it features two ball bearings, a more powerful motor and an exhaust silencer that redirects air away from the vehicle for optimal working comfort. Exceptional performance and versatility: Optimized...
Reference: PSD12
The 12 mm diameter windshield cleaning blades are specially designed to remove excess adhesive from the windshield seal, particularly around curves and edges. Their specific shape allows for precise cleaning while minimizing the risk of damaging the paintwork, unlike standard scraping blades. Also available in 12 mm rectangular (REF-PS-12) and Ø 6 mm...
Reference: DLH-511
Double-end moulding release tool This heavy-duty tool is made of steel so it will not bend. It has a small rubber spacer through each end to the tool up off the glass about 1 mm. This is important for two reasons. First, it prevents the tool from scratching the glass. Secondly, it holds the end above the glass so there is less chance the tip will catch...
Reference: PSD6
The 6 mm diameter windshield cleaning blades are designed to effectively remove excess adhesive from the windshield seal, particularly in curved areas and hard-to-reach edges. Their specific shape allows for precise cleaning while reducing the risk of damage to the paintwork, unlike standard scraping blades. Also available in 12 mm rectangular (REF-PS-12)...
Reference: CAISSE-N446
In fair condition Only a few minor cosmetic flaws are visible - Only 1 item available 2nde VIE Warranty: 6 months Storage case Length: 520 mm - Width: 280 mm - External Height: 270 mm
Reference: SK120
Replacement blade for fsl 240 pinchweld scraper 13mm wide
Reference: FB123
profondeur de coupe : 40 mm longueur totale : 74 mm vendue à l'unité
Reference: CAISSE-N436
In very good condition There are only a few minor cosmetic flaws—only 1 item available 2nde VIE warranty: 6 months Storage case Dimensions: 310MM x 170 x 135H
Reference: SPATULE-N438-DESTOCK
Note: Only 14 units in stock The right-angle clip removal tool is specially designed to facilitate the removal of clips, staples, and fasteners found on vehicles. Its angled design allows for easier access to hard-to-reach areas and enables precise work during removal operations. TIP WIDTH: 20 MM X 40 MM LONG / OPENING DIMENSIONS: 7 MM WIDE X 15 MM DEEP
Reference: DST-58
Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...
Reference: CG-200NEW
Designed to remove windshields quickly and easily, this pneumatic knife cuts through adhesive using a system of powerful oscillating blades. It offers excellent speed control thanks to its integrated regulator, allowing for precise work as needed. The blades can be rotated to 12 different positions, ensuring great versatility, even in hard-to-reach areas....
Reference: CCR-819
EQUALIZER® cowling clip removal tool If expension-type cowling worked the way they were designed, you would simply unscrew the plastic screw and the clip would come out. Unfortunately, they seldom work correctly. Our cowling clip removal tool has a small sharp screw that screws into the plastic head and pulls the screw out. The clip will then collapse and...
Reference: RCH-163
The REPAREGLASS flexible pull handle with neoprene coating is designed for comfortable and safe use during cold cutting. It has the same features as the classic ZDK-395 handle, with the added advantage of a neoprene coating that improves grip while protecting painted surfaces on the vehicle. Perfect for use with ZDK-395 cold cutting knives, this flexible...
Reference: ROLL-OUT-2000
Windscreen cutting kitThis cutting tool allows to one operator only to cut outwindshields from inside the car.Supplied with DVD training and complete informations.
Reference: LFA-402
flexlight mini torch with flexible shaftA screw has been lost? There is a leak in the engine compartment? A connector is hidden under the dash? This mini torch with flexible shaft will give you the needed light-in dark or hidden places. It can even become one of the most useful tools to you. Needs two LR6/AM3/AA batteries (delivered without batteries ).-...
Reference: CAISSE-N435
In very good condition There are only a few minor cosmetic flaws—only 1 item available 2nde VIE warranty: 6 months Storage case Dimensions: 310MM x 170 x 135H
Reference: DESTOCK-AF1009
Please note: Only 5 units in stock REF-AF1009Self oiling glass cutterDue to the translucent color, you can see how much oil is inthe cutter. It has an end cap with a seal so the oil will not leakfrom the end of the cutter.They are of the highestquality and havebecome one of themost-used glass cuttersin the world.• Sold individually
Reference: CM-536
Magnetic bowlThe bowl can be placed almost everywhere on a vehicule because the bottom has a rubber cover to avoid scratches. The strong magnet surely holds thebowl itself and all magnetic content.Diameter:140 mm
Reference: CG-200-GVF
The Standard Pneumatic Rubber Cutter is designed to quickly and effortlessly remove windshields by cutting through adhesive with its efficient oscillating blades. Its built-in speed regulator allows for precise control during use, while the blades can be adjusted to 12 different positions to suit all configurations. Compact and easy to maneuver, it is...
Reference: Z12RD
New ULTRAWIZ Cold knife bladeSold individually - Extra thin Cutting length: 38mmCARTON OF 10
Reference: WFA-450
REF. WFA-450Universal Wiper Puller. Sometimes you need alarge thick puller arm to remove a windshield wiperand sometimes you need a small thin arm. This is thereason our wiper puller has interchangable arms. Setthe wiper puller arms on the horozontal slide, slidethem in until they touch the side of the windshieldwiper, snug the wing nut to hold them in...
Reference: AD42
The nylon rope holder hook is a tool specially designed to facilitate windshield cutting operations. It effectively holds the nylon rope in place during the operation, ensuring optimal tension and more precise handling. Robust and easy to use, this device improves control when cutting glass, while enhancing safety and efficiency in the workshop. Compact...
Reference: AEB405-N194
Kit in good condition. The case may be incomplete (blades). Only cosmetic defects shown in the photos are present. Only one item available. 2nd LIFE warranty: 6 months Recommended for cutting the lower parts of the windscreen, rear windows and quarter windows. Cutting the interior of the vehicle. Compact and lighter, it is even easier to handle,...
Effectively protecting the windshield bay during cutting has long been a challenge for technicians. Traditional methods, such as inserting a protective shield between the glass and the bay, are often ineffective against the repeated vibrations and impacts of electric or pneumatic tools. These tools can displace or damage the protective shield, exposing the paint to the risk of damage.
This system of metal strips covered with protective tape has been specially designed to address this problem. Unlike conventional metal strips, these offer increased resistance to downward pressure, allowing them to remain in place throughout the entire operation.
The metal strips are available in four different lengths to suit all types of vehicles, including recent models without seals around the windows:
