BTB kit (automatic PB cutting)

Reference: FB076

FEIN cutting blade, straight 35 mm (56 mm 12 g)

cutting length: 24mm 17g Sold individually

Reference: FB079

Hook blade 36 mm

cutting length : 36mm 17g Sold individually

Reference: PRO-LAV

Special protector part to protect glass cleaner sprayer solution

REF. PRO-LAVMany of the wipers system includes a glass cleaner sprayer solution.The hose is integrated to the arm wiper and runs thanks to its movements. The sprayer couldbe damaged with an arm wiper puller. The tightning nut of the puller has to be located on the specialprotector of the center area of the cleaner sprayer. Untight the bolt which is...

Reference: Z6

Cold knife blade, extra fine 38 mm

Cold knife blade, extra fine - Sold individually - Cutting length: 38 mm - 20 g CARTON OF 10

Reference: FB081

Cutting blade, cranked 60 mm

Lame à découper, courbe profondeur de coupe : 60 mm longueur totale : 85 mm vendue à l'unité

Reference: WK27RM

LEFT HAND INVERTED BTB BLADE 25MM

Left hand, inverted BTB blade, 25 mm

Reference: AB10

9 mm snap-off blades for ol30 knives

9 mm Snap-off blades forOL30 knives (Package of 10 pieces) Olfa®knife Standard knives with a wide 18mm blade are generally too wide to accomplish fine jobs. With its retractable blade of 9mm wide, this knife allows a fine cutting with one hand. - 85 x 9 x 0,4 mm - 38 g (Package of 10 pieces)

Reference: Z30

Special cold knife blade 30 mm

This blade series enables you to use a cold knife where you could never use it before ! The 60 mm long blade isintended to cut all those hard to reach PU bondings that are far away from the glasses edge and where a normalcold knife blade could never reach. But also all lowerglass edges with surmounting wings and bonnets are aperfect field of application...

Reference: VKD-44A

Brand: REPAREGLASS

SQUARED CUTTING WIRE in a spool- Size: 0.6mm - 44 ML

SQUARED CUTTING WIRE in a spool REPAREGLASS Surprising but true! The cutting resistance of the squared wire is far higher than the one of the common round wire. Try it, you will see!Squared wire - 0,6 x 0,6 mm,- length: 44m, on plastic spool.- 100 x 22 mm - 110 g

Reference: 3007-RK

Handle for 3007-K and 3008-K

Designed to ensure a good grip and optimal control of the tool, this handle can replace the original handle supplied with the 3007-k and 3008-k cold knives in case of breakage.

Reference: CS-RC14

Handable rolling Tool-box

Toolbox on wheels Size: L:62 x W:30 x H:32 cm + 10cm in height with wheels 4 drawers of 22 x 20cm

Reference: WK1S

Serrated, long, flat BTB blade, 300mm

Serrated, long, flat BTB blade, 300mm

Reference: FB083-DESTOCK

Hook blade with U shape - 10mm

REF-FB-083 Hook blade with U shapeCutting length: 10 mmSold individually

Reference: Z9

Cold knife blade coated, extra fine 38 mm

Cold knife blade coated, extra fine - Sold individually- Cutting length: 38 mm- 20gCARTON OF 10

Reference: WK28M

Right hand, BTB blade, 25mm

Right hand, BTB blade, 25mm

Reference: ZLN-914

Nylon wire - Ø 1.05 mm, Longueur : 100 ML - 2000 Newton

- Multi-purpose with 1 length (approx. 2 to 4 uses) - Does not scratch surfaces - No snags on the windscreen bay or windscreen seal - Can be used with all ratchet systems - Very fine Ø 1.05 mm, Length: 100 M 2000 Newton

Reference: WK3

Multi-purpose, bent BTB blade, 200mm

Lame BTB multi-fonction plate 200mm(utilisation générale)

Reference: DLH-511

Double-end moulding release tool

Double-end moulding release tool This heavy-duty tool is made of steel so it will not bend. It has a small rubber spacer through each end to the tool up off the glass about 1 mm. This is important for two reasons. First, it prevents the tool from scratching the glass. Secondly, it holds the end above the glass so there is less chance the tip will catch...

Reference: AST-120

Telescopic magnet

Telescopic magnetWhen you work above all in the door or chassis frame of the vehicle, a screw may fall and it may be impossible to pick it up with your fingers. With this telescopic magnet, you no longer have this problem. The telescopic device is extendable from 12 (corresponding to the size of a ballpoint pen ) to 60 cm. The strong magnet is capable to...

Reference: WFA-450SPECIAL

Universal Wiper Puller

REF-WFA-450SPECIALSimilar to WFA-450 butendowed with double arm

Reference: DST-58

Curved wire threader 58 mm (package at 3 pièces)

Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...

Reference: AIG-125

T-handles wire threader

Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.- 120 x 26 x 10 mm - 20 g

Reference: SYSTEME-PROTECTION-DE-BAIE

Metal strip: Windshield bay protection

Effectively protecting the windshield bay during cutting has long been a challenge for technicians. Traditional methods, such as inserting a protective shield between the glass and the bay, are often ineffective against the repeated vibrations and impacts of electric or pneumatic tools. These tools can displace or damage the protective shield, exposing...

Reference: FSC1.7B2

FEIN battery-powered knife - without blade, with battery

Discover a powerful, precise and completely autonomous solution for your automotive work. This FEIN cordless knife is designed to meet the highest demands of glass professionals, combining mobility, performance and reliability. Technical specifications: Battery voltage: 18 V Battery capacity: 5 Ah Oscillations: 10,000 - 19,500 rpm Amplitude: 2 x 1.7°...

Reference: FB207

Hook blade with L shape - 25,4 mm

profondeur de coupe : 25,4 mmvendue à l'unité

Reference: ENK148

Pneumatic knife: EQUALIZER ® Ninja deluxe

The Equalizer® Ninja Deluxe kit is the essential tool for glass professionals for fast, precise and efficient cold cutting. Suitable for all types of vehicles, this pneumatic knife combines power, ergonomics and maneuverability, with up to 22,000 oscillations per minute for effortless work, even in the most complex areas. Key features: Exceptional...

Reference: Z7RV

New Paint Protection Reverse Bend Blade 19mm « ULTRAWIZ »

Nylon coating protects exposed paint from accidental blade contactIdeal for exposed glass with underside molding or encapsulationOffers the control a technician needs to cut awayfrom the glass or moldingAvailable in 3 lengths : 19 mm – 25 mm – 38 mm

Reference: CZ-444

Clip removal tool

Reference: SD-22

Braided wire in a spool - - ø 0,80 mm - 22ML

Braided wire in a spool REPAREGLASS ø 0.80 mm, length: 22 m, Wound on a plastic spool. 1083 NEWTON The wire to be cut is twisted according to our exact specifications from three strong stainless steel wires. The wire is anodised in a typical "gold" colour.

Reference: ZAW-095

Arm wiper puller tool

Arm wiper puller tool