Kit BTB (découpe PB automatique)

Reference: H1

Long Olfa®

Olfa® knifeKnife with a snap-off blade, 25 mm and 0,7 mm wide.The blade can be outside its housing up to a length of 10 cm and a thumb locking screw allows you to lock the blade in any position.Back of the knife features a rubber grip that lets the knife rest comfortably in your hand and keeps it from slipping.- 172 x 34 x 25 mm - 155 g

Reference: FB207

Hook blade with L shape - 25,4 mm

profondeur de coupe : 25,4 mmvendue à l'unité

Reference: L2

Olfa® knife

Olfa®knife This knife is made of high impact plastic, has a stainless steel blade housing and a positive locking thumb wheel so that you can set the blade at any length. The back of the knife features a rubber grip that lets the knife rest comfortably in your hand and keeps it from slipping. The famous model. - 146 x 40 x 20 mm - 110 g

Reference: CG-200NEW

Pneumatic knife with original blade

Designed to remove windshields quickly and easily, this pneumatic knife cuts through adhesive using a system of powerful oscillating blades. It offers excellent speed control thanks to its integrated regulator, allowing for precise work as needed. The blades can be rotated to 12 different positions, ensuring great versatility, even in hard-to-reach areas....

Reference: LT-415-1

5 adaptable eylets

5 replacement eylets

Reference: PRO-LAV

Special protector part to protect glass cleaner sprayer solution

REF. PRO-LAVMany of the wipers system includes a glass cleaner sprayer solution.The hose is integrated to the arm wiper and runs thanks to its movements. The sprayer couldbe damaged with an arm wiper puller. The tightning nut of the puller has to be located on the specialprotector of the center area of the cleaner sprayer. Untight the bolt which is...

Reference: Z1

Cold knife blade 19 mm

Cold knife blade- Sold individually- Cutting length: 19 mm- 18gCARTON OF 10

Reference: CT-749

Window and door clip removal tool

Window and doorclip removal toolThis tool is used to remove clips that are used with Opel and Ford brands, as well as with most of other vehicles that have clips.- 250 x 58 x 32 mm- 130 g

Reference: FB176

Cutting blade, straight - 40mm

Cutting blade, straightCutting length: 40 mmSold individually

Reference: AIG-300

Wire guide

The wire guide's long, narrow shaft allows positioning the wire so it prevents the dash and interior mouldings from being damaged. Recommended above all for cars with a high windshield slope or with a bottom window bond that is hardly accessible. Of course, the wire guide can also be used from the outside.- 350 x 38 x 38 mm - 220 g

Reference: WK2S

Serrated, average, universal, flat BTB blade, 240mm

Serrated, average, universal, flat BTB blade, 240mm

Reference: FB111

Hook blade with U shape - 95 mm

profondeur de coupe : 95 mmvendue à l' unité

Reference: SGR-380

Glass scraper, with 1 RK-100A blade

Glass scraper with 1 RK-100A bladeMainly used to rapidly and entirely remove bond residues on windows that will be reinstalled. Also used to remove stickers. Simply replace the old blade by a new one, no sharpening needed.

Reference: H600

Cutter 9 mm

9 mm cutter - supplied without bladeCompatible blades: Ref.AB-50S

Reference: FSC-300SPECIAL

Brand: REPAREGLASS

Special scraper

REF. FSC-300SPECIALSCRAPER (without blade)To scrape the old urethane bead. This scraper is universal due to thefact it can accept different blades width ( 13 mm – 16 mm – 20 mm)and angular blades

Reference: AST-120

Telescopic magnet

Telescopic magnetWhen you work above all in the door or chassis frame of the vehicle, a screw may fall and it may be impossible to pick it up with your fingers. With this telescopic magnet, you no longer have this problem. The telescopic device is extendable from 12 (corresponding to the size of a ballpoint pen ) to 60 cm. The strong magnet is capable to...

Reference: ULB-582

TRAPEZOIDAL BLADES (x 10 )

Trapezoidal blades ( x 10 )

Reference: MSP-211

BOX EXTRACTOR

Arm wiper pullers kit If you remove a bolted on windshield wiper a few months after the vehicle was builtthen it is usually not difficult to remove, but try removing the wiper arm two or threeyears after it was built. It can be almost impossible because manufacturers use onetype of metal on the wiper arm and a different type of metal on the wiper post. If...

Reference: WFA-450SPECIAL

Universal Wiper Puller

REF-WFA-450SPECIALSimilar to WFA-450 butendowed with double arm

Reference: GCC-506

Glass run channel cleaner

Glass run channel cleanerIf you have ever cleaned glass out of a glass run channel, you know the problem. Broken pieces of tempered glass will hide behind the lip of the glass run chanel and scrape the door glass when you roll it up or down. The glass run channel cleaner reaches behind that lip to remove even the most stubbornly-wedged pieces of glass...

Reference: DST-734

T-handle wire threader with hole

REF-DST-734 T-handle wire threader with hole Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.120 x 26 x 10 mm • 20 g

Reference: FB153

Cutting blade, straight 50 mm

Lame à découper Fein 50 mm

Reference: ENK148

Pneumatic knife: EQUALIZER ® Ninja deluxe

The Equalizer® Ninja Deluxe kit is the essential tool for glass professionals for fast, precise and efficient cold cutting. Suitable for all types of vehicles, this pneumatic knife combines power, ergonomics and maneuverability, with up to 22,000 oscillations per minute for effortless work, even in the most complex areas. Key features: Exceptional...

Reference: FICEL9M

String of 9 meters for TB-102

String of 9 meters for TB-102 (Rope insert tool).

Reference: LH-683-N144

Lever for hubcaps - 2nd life

In average condition Only a few minor cosmetic defects appear - 1 Only one item available 2nd LIFE warranty: 6 months Removing hubcaps without the right tool can quickly damage these delicate parts. If a flat screwdriver is sometimes used, its small contact surface often causes damage and does not provide sufficient leverage. The hubcap lever solves these...

Reference: WK2

Average, universal, flat BTB blade, 240mm

Average, universal, flat BTB blade, 240mm

Reference: CS-RC14

Handable rolling Tool-box

Toolbox on wheels Size: L:62 x W:30 x H:32 cm + 10cm in height with wheels 4 drawers of 22 x 20cm

Reference: HDW5634FEUTRE

Felt for RAPTOR device

Felt for RAPTOR device

Reference: ECL784

Cutting lubricant - 235ml

This high-performance lubricant is specially formulated to optimize the performance of your cutting tools. Suitable for all cutting devices, it effectively reduces friction between the blade and the sheath, limiting premature wear, improving cutting precision, and extending the life of your equipment. Ideal for professional or domestic use, it ensures...

Reference: WK28RM

RIGHT HAND INVERTED BTB BLADE 25MM

Right hand, inverted BTB blade, 25 mmManual or pneumatic use.