New COLD KNIFE BLADES SERRATED 38mm

Reference: FSB102

Saw disk ø 63 mm

disque de scie ø 63 mm vendu à l'unité

Reference: Z30

Special cold knife blade 30 mm

This blade series enables you to use a cold knife where you could never use it before ! The 60 mm long blade isintended to cut all those hard to reach PU bondings that are far away from the glasses edge and where a normalcold knife blade could never reach. But also all lowerglass edges with surmounting wings and bonnets are aperfect field of application...

Reference: 3007-RK

Handle for 3007-K and 3008-K

Designed to ensure a good grip and optimal control of the tool, this handle can replace the original handle supplied with the 3007-k and 3008-k cold knives in case of breakage.

Reference: DSS-175

One-man wire cut-out tool

One-man wire cut-out toolREPAREGLASSOne-man wire cut-out toolThis tool acts like another person sitting inside the vehicle pulling the wire back after you havemade your cutting stroke.Attached to the swivel is a spring that acts as a second person; you pull the wire out to make your cut and the springs pulls the wire back in. The spring is attached to a...

Reference: CB1

Brand: REPAREGLASS

Steel or nylon piano wire locking clip

The locking clip replaces the original elastic band that holds the steel or nylon piano wire in place.

Reference: TB-415

Locking strip tool with 5 interchangeable eyelets

Locking strip tool With the 5 different eyelets and the pressure roller, this locking strip tool can install pratically all different types of locking strips.- 160 x Ø 25 mm - 215 g

Reference: FB194

Hook blade 110 mm

LAME A CROCHET EN U - 110 mm

Reference: FB081

Cutting blade, cranked 60 mm

Lame à découper, courbe profondeur de coupe : 60 mm longueur totale : 85 mm vendue à l'unité

Reference: AIG-300

Wire guide

The wire guide's long, narrow shaft allows positioning the wire so it prevents the dash and interior mouldings from being damaged. Recommended above all for cars with a high windshield slope or with a bottom window bond that is hardly accessible. Of course, the wire guide can also be used from the outside.- 350 x 38 x 38 mm - 220 g

Reference: PSD12

Bay cleaning blades (scraper not included) - 12 mm

The 12 mm diameter windshield cleaning blades are specially designed to remove excess adhesive from the windshield seal, particularly around curves and edges. Their specific shape allows for precise cleaning while minimizing the risk of damaging the paintwork, unlike standard scraping blades. Also available in 12 mm rectangular (REF-PS-12) and Ø 6 mm...

Reference: PILE-RAPTOR522

Battery pack for RAPTOR Kit

Battery pack for RAPTOR kit Warning: these batteries are compatible with RAPTOR kits from serial number R0005372 upwards. For kits purchased before this number, you will need to order the reference PILE-RAPTORX4.

Reference: CG-200NEW

Pneumatic knife with original blade

Designed to remove windshields quickly and easily, this pneumatic knife cuts through adhesive using a system of powerful oscillating blades. It offers excellent speed control thanks to its integrated regulator, allowing for precise work as needed. The blades can be rotated to 12 different positions, ensuring great versatility, even in hard-to-reach areas....

Reference: MRC1105-R4 - N424

Ratchet for ROLL-N-CUT kit - N424

Not available

Reference: FSP-4PCS

Set of 4 plastic scrapers

Set of 4 plastic scrapers

Reference: CORDE-TRI-N434-DESTOCK

Triangular Piano String - 0.6 mm - 50 ML - N434 - Clearance Sale

Please note: Only 11 units in stock Triangular stainless steel cutting wire 0.6 ± 0.02 x 0.06 ± 0.02 Length = 50 ml Tensile strength 240 MPa ± 100 MPa Old-generation wire

Reference: Z1

Cold knife blade 19 mm

Cold knife blade- Sold individually- Cutting length: 19 mm- 18gCARTON OF 10

Reference: RAPTOR

Windshield cutting system with automatic vacuum - RAPTOR

The  Raptor™ is a cord and wire auto glass removal device designed from the ground-up to dramatically improve the power of the vacuum cup with the integration of our AirForce™ Constant Vacuum Cups. This technology has been specifically developed to create a quick placement and constant vacuum to the glass so the Raptor™ stays in place and resists...

Reference: IRON-CUT-DELUXE

IRON CUT – Dual-Transmission Windshield Cutting System

The IRON CUT is a next-generation windshield cutting tool combining compactness, reliability, and performance. Thanks to its dual manual and electric drive, it ensures fast, precise, and safe cutting on all types of automotive glass. Designed and manufactured in France by VBSA, it is the new benchmark for glazing professionals. The IRON CUT is an...

Reference: WK2S

Serrated, average, universal, flat BTB blade, 240mm

Serrated, average, universal, flat BTB blade, 240mm

Reference: RR23-CLIQUETRAPTOR

Ratchet for RAPTOR kit

Please note that this ratchet is not compatible with the RAPTOR Kit. 1 Ratchet For ROLL-N-CUT kit

Reference: Z6

Cold knife blade, extra fine 38 mm

Cold knife blade, extra fine - Sold individually - Cutting length: 38 mm - 20 g CARTON OF 10

Reference: L2

Olfa® knife

Olfa®knife This knife is made of high impact plastic, has a stainless steel blade housing and a positive locking thumb wheel so that you can set the blade at any length. The back of the knife features a rubber grip that lets the knife rest comfortably in your hand and keeps it from slipping. The famous model. - 146 x 40 x 20 mm - 110 g

Reference: OL30

Olfa®knife, with one snap-off blade of 9mm

Olfa® knife, with one snap-off blade of 9 mm.Standard knives with a wide 18 mm blade are generally too wide to accomplish fine jobs. With its retractable blade of 9 mm wide, this knife allows a fine cutting with one hand.- 130 x 16 x 10 mm - 36 g

Reference: FSL240

Pinchweld scraper with interchangeable blade

Pinchweld scraper with interchangeable bladeThis may be the last pinchweld scraper you will ever buy! From now on.You may just buy blades. When the blade finally wears out, remove the two screws, pull out the old blade, drop in a new blade and tighten the two screws. These pinchweld scrapers are made of spring steel and are hard enough so they will not...

Reference: WK27M

Left hand, BTB blade, 25mm

Lame BTB main gauche 25mm(utilisation manuelle ou pneumatique)

Reference: CS-RC-N405

Empty Toolbox with 4 Drawers and a Removable Tray (without Wheels) – Second Life – N405

In very good condition Only a few minor cosmetic defects – Only one unit available Second Life Warranty: 6 months Empty toolbox with 4 lockable drawers and a removable top tray. Central handle + 2 side handles for easy transport. Optional: Set of 4 wheels (2 with brake and 2 without) to facilitate mobility of the toolbox. Dimensions: L: 62 × W: 30 × H: 32...

Reference: WK1

Long, flat BTB blade, 300mm

Long, flat BTB blade, 300mm(for general use)

Reference: 3307

Handle: EQUALIZER® Ninja pneumatic knives

The EQUALIZER® Ninja pneumatic knife handle is a replacement part designed specifically to restore or improve the grip of your tool. Robust and ergonomic, it allows you to maintain optimal control of the knife during cold cutting, even in the most complex areas. Features: Exclusive compatibility: designed exclusively for the EQUALIZER® Ninja model...

Reference: 240

Empty RAPTOR case

Dimensions: 41 x 30 x 10 cm Sold without foam

Reference: AIG-789

Straight wire threader

Many technicians remove windshields by starting the wire through the top and bottom center of the windshield, then cutting towards each side. So as to push the cutting wire into the urethane, especially where there is a wide surface of urethane, we recommend using the wire threader. The slot (1,2 mm only) and the cutting wire are pushed together into the...