New COLD KNIFE BLADES SERRATED 25mm

Reference: TRI-176

Triangular wire - 0.85mm - 50ML

REF. TRI-176Triangular wire.0,85 x 0,85 mm,Length : 50 metersTensile strength : 691 Newton

Reference: CAISSE-N398

Storage case L: 44 cm x H: 17 cm x W: 19 cm - 2nd LIFE - N398

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Storage case Length: 44cm - Width: 17cm - Height: 19cm

Reference: AIG-730

T-handles wire threader for cutting steel or nylon thread

T-handles wire threader for cutting steel or nylon thread

Reference: XKD-22A

New square cutting wire, Size 0.7 mm - 22ML

Reference: FSC1.7BAT-SET

Set of 2 x 18V - 5A batteries + 1 charger for FEIN FSC1.7 cordless knife

Set of 2 18V - 5A batteries + 1 charger for FEIN FSC1.7 cordless knife Optimise the runtime and power of your FEIN cordless knife with this high-capacity Li-ion battery. Designed for demanding professionals, it delivers reliable performance and extended runtime for intensive work. Key features of the battery: 18V voltage: Optimal power to meet the needs...

Reference: WFA-450SPECIAL

Universal Wiper Puller

REF-WFA-450SPECIALSimilar to WFA-450 butendowed with double arm

Reference: LT-415-1

5 adaptable eylets

5 replacement eylets

Reference: WK24ZS

Serrated Offset, BTB blade, 150mm

Serrated Offset, BTB blade, 150mm

Reference: DESTOCK-FRE-080-P

Retention device: metal strip and trim caps

To prevent the corners of hubcaps from sticking out, they are often attached with adhesive tape. However, this method carries risks: adhesives can react chemically with the vehicle's paintwork, causing damage. The ideal solution? Our retaining tool, specially designed to secure hubcaps without compromising paint quality. Advantages : Optimum protection:...

Reference: Z8

Cold knife blade coated, extra fine 25 mm

Cold knife blade coated, extra fine - Sold individually- Cutting length: 25 mm- 20gCARTON OF 10

Reference: IRON-CUT-DELUXE

IRON CUT – Dual-Transmission Windshield Cutting System

The IRON CUT is a next-generation windshield cutting tool combining compactness, reliability, and performance. Thanks to its dual manual and electric drive, it ensures fast, precise, and safe cutting on all types of automotive glass. Designed and manufactured in France by VBSA, it is the new benchmark for glazing professionals. The IRON CUT is an...

Reference: SK120

Replacement blade for fsl 240 pinchweld scraper l:13mm

Replacement blade for fsl 240 pinchweld scraper 13mm wide

Reference: Z2

Cold knife blade 25 mm

Cold knife blade, extra fine- Sold individually- Cutting length: 25 mm- 18gCARTON OF 10

Reference: 3307

Handle: EQUALIZER® Ninja pneumatic knives

The EQUALIZER® Ninja pneumatic knife handle is a replacement part designed specifically to restore or improve the grip of your tool. Robust and ergonomic, it allows you to maintain optimal control of the knife during cold cutting, even in the most complex areas. Features: Exclusive compatibility: designed exclusively for the EQUALIZER® Ninja model...

Reference: EGK150

Pneumatic knife: EQUALIZER ® Ninja GT Deluxe

The Ninja™ GT Deluxe is the improved and reinforced version of the famous Ninja™ pneumatic knife. Designed for the most demanding cold cutting applications, it features two ball bearings, a more powerful motor and an exhaust silencer that redirects air away from the vehicle for optimal working comfort. Exceptional performance and versatility: Optimized...

Reference: AEB405-N192

Pneumatic knife: Equalizer® EXCALIBUR® DELUXE - 2nd LIFE - N192

Kit in good condition. The case may be incomplete (blades). Only cosmetic defects shown in the photos are present. Only one item available. 2nd LIFE warranty: 6 months Recommended for cutting the lower parts of the windscreen, rear windows and quarter windows. Cutting the interior of the vehicle. Compact and lighter, it is even easier to handle,...

Reference: THH-540

Telescopic bonnet holder

Telescopic bonnet holder Keeps the bonnet or hatch open at any desired angle. Telescopic bonnet holder tepless adjustable from 54 to 120 cm.

Reference: FB073

FEIN cutting blade, straight 35 mm

FEIN cutting blade, straight 35 mm (56 mm 12 g)

Reference: Z60

Special cold knife blade 60 mm

This blade series enables you to use a cold knife where you could never use it before ! The 60 mm long blade is intended to cut all those hard to reach PU bondings thatare far away from the glasses edge and where a normalcold knife blade could never reach. But also all lowerglass edges with surmounting wings and bonnets are aperfect field of application...

Reference: 240

Empty RAPTOR case

Dimensions: 41 x 30 x 10 cm Sold without foam

Reference: FSB102

Saw disk ø 63 mm

disque de scie ø 63 mm vendu à l'unité

Reference: DLH-511

Double-end moulding release tool

Double-end moulding release tool This heavy-duty tool is made of steel so it will not bend. It has a small rubber spacer through each end to the tool up off the glass about 1 mm. This is important for two reasons. First, it prevents the tool from scratching the glass. Secondly, it holds the end above the glass so there is less chance the tip will catch...

Reference: WK2

Average, universal, flat BTB blade, 240mm

Average, universal, flat BTB blade, 240mm

Reference: AB10

9 mm snap-off blades for ol30 knives

9 mm Snap-off blades forOL30 knives (Package of 10 pieces) Olfa®knife Standard knives with a wide 18mm blade are generally too wide to accomplish fine jobs. With its retractable blade of 9mm wide, this knife allows a fine cutting with one hand. - 85 x 9 x 0,4 mm - 38 g (Package of 10 pieces)

Reference: MSP-211

BOX EXTRACTOR

Arm wiper pullers kit If you remove a bolted on windshield wiper a few months after the vehicle was builtthen it is usually not difficult to remove, but try removing the wiper arm two or threeyears after it was built. It can be almost impossible because manufacturers use onetype of metal on the wiper arm and a different type of metal on the wiper post. If...

Reference: LB10

Rigid not segmented blades for l2 and xl2 knives

Rigid not segmented blades, for L2 and XL2 knives Package of 10 pieces - 110 x 18 x 0.5 mm - 65 g

Reference: AIG-789

Straight wire threader

Many technicians remove windshields by starting the wire through the top and bottom center of the windshield, then cutting towards each side. So as to push the cutting wire into the urethane, especially where there is a wide surface of urethane, we recommend using the wire threader. The slot (1,2 mm only) and the cutting wire are pushed together into the...

Reference: PILE-RAPTOR522

Battery pack for RAPTOR Kit

Battery pack for RAPTOR kit Warning: these batteries are compatible with RAPTOR kits from serial number R0005372 upwards. For kits purchased before this number, you will need to order the reference PILE-RAPTORX4.

Reference: WP738-E

EQUALIZER® pinchweld scraper

Used to remove urethane and butyl from the pinchweld. The tool has a hardened steel blade of 24 mm wide that can be sharpened dozens of times. - 200 x 29 x 29 mm - 120 g

Reference: LH-683-N113

Lever for hubcaps - 2nd life

In good condition Only a few minor cosmetic defects appear - 1 Only one item available 2nd LIFE warranty: 6 months Removing hubcaps without the right tool can quickly damage these delicate parts. If a flat screwdriver is sometimes used, its small contact surface often causes damage and does not provide sufficient leverage. The hubcap lever solves these...