Cold knife blade coated, extra fine 19 mm

Reference: FB194

Hook blade 110 mm

LAME A CROCHET EN U - 110 mm

Reference: CG-200NEW

Pneumatic knife with original blade

Designed to remove windshields quickly and easily, this pneumatic knife cuts through adhesive using a system of powerful oscillating blades. It offers excellent speed control thanks to its integrated regulator, allowing for precise work as needed. The blades can be rotated to 12 different positions, ensuring great versatility, even in hard-to-reach areas....

Reference: 848031AIGUILLE

Needle to guide the wire upper the metal tabs from the car

Needle  to guide the wire upper the metal tabs from the car .

Reference: WK4ZS

Serrated, deep offset, multi-purpose BTB blade, 140mm

Serrated, deep offset, multi-purpose BTB blade, 140mm

Reference: FSC1.7B2

FEIN battery-powered knife - without blade, with battery

Discover a powerful, precise and completely autonomous solution for your automotive work. This FEIN cordless knife is designed to meet the highest demands of glass professionals, combining mobility, performance and reliability. Technical specifications: Battery voltage: 18 V Battery capacity: 5 Ah Oscillations: 10,000 - 19,500 rpm Amplitude: 2 x 1.7°...

Reference: LAC-405

Suction cup for holding cutting rope

Reference: DESTOCK-WK4RS

BTB multifunction blade, 190 mm angled, serrated

BTB multifunction blade, 190 mm angled, serrated - BTB blade for easy removal of curved and encapsulated glazing, mouldings,...

Reference: FB176

Cutting blade, straight - 40mm

Cutting blade, straightCutting length: 40 mmSold individually

Reference: ULB-582

TRAPEZOIDAL BLADES (x 10 )

Trapezoidal blades ( x 10 )

Reference: SGR-120

Retractable blade scraper for RK-100A and JPB391 blades

Retractable blade scraper for RK-100A and JPB391 blades

Reference: AD-DEVIDOIR

Anchor Suction Cup (Line Dispenser) for IRON CUT

The IRON CUT anchor suction cup (supplied without cutting line) is a line dispenser designed to facilitate windscreen cutting and removal operations using the IRON CUT system. Positioned directly on the glass, it provides an anchor point for the cutting line and assists with smooth line dispensing during the removal process. Its constant vacuum system...

Reference: FB079

Hook blade 36 mm

cutting length : 36mm 17g Sold individually

Reference: HB10

Heavy-duty snap-off blade

Heavy-duty snap-off blade- package of 10 pieces- 140 x 25 x 0.7 mm - 106 g

Reference: WK28XL

RIGHT HAND BTB BLADE 45MM

Right hand, BTB blade, 45 mm

Reference: SK150

Replacement blade for fsl 240 pinchweld scraper l:19mm

Replacement blade for fsl 240 pinchweld scraper l:19mm

Reference: WK10HD

BTB pneumatic knife (automatic PB cutting)

The BTB pneumatic knife is the ideal tool for quick and precise cutting of windshields, both inside and outside the vehicle. Compact, lightweight (1.1 kg) and easy to handle, it significantly reduces physical effort for the user while offering optimal cutting performance. Its design reduces the risk of blade overheating and impact on the glass. Supplied...

Reference: BAT-FSC1.7

Old Li -ion battery for FEIN battery knife (before 2024)

This 18 V - 2.4 Ah Li-ion battery is specially designed to power FEIN battery-powered knives of previous generations. Offering reliable and consistent performance, it is ideal for extending the life of your compatible FEIN tools. Key features: Li-ion technology: Ensures stable autonomy and fast recharging. 2.4 Ah capacity: Optimized for work requiring...

Reference: ECL784

Cutting lubricant - 235ml

This high-performance lubricant is specially formulated to optimize the performance of your cutting tools. Suitable for all cutting devices, it effectively reduces friction between the blade and the sheath, limiting premature wear, improving cutting precision, and extending the life of your equipment. Ideal for professional or domestic use, it ensures...

Reference: ZAW-010

Wiper puller for bolted-on wipers

Wiper puller for bolted-on wipersBecause windshield wipers have become larger, wiper arms are pressure-fitted to the posts so they will not slip. They are then secured with a nut to hold the arm in place so they will not lift. Until now, it was almost impossible to remove these wiper arms without breaking or damaging them or scratching the cowl. You no...

Reference: PILE-RAPTOR522

Battery pack for RAPTOR Kit

Battery pack for RAPTOR kit Warning: these batteries are compatible with RAPTOR kits from serial number R0005372 upwards. For kits purchased before this number, you will need to order the reference PILE-RAPTORX4.

Reference: DSS-175

One-man wire cut-out tool

One-man wire cut-out toolREPAREGLASSOne-man wire cut-out toolThis tool acts like another person sitting inside the vehicle pulling the wire back after you havemade your cutting stroke.Attached to the swivel is a spring that acts as a second person; you pull the wire out to make your cut and the springs pulls the wire back in. The spring is attached to a...

Reference: DST-58

Curved wire threader 58 mm (package at 3 pièces)

Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...

Reference: FSL240

Pinchweld scraper with interchangeable blade

Pinchweld scraper with interchangeable bladeThis may be the last pinchweld scraper you will ever buy! From now on.You may just buy blades. When the blade finally wears out, remove the two screws, pull out the old blade, drop in a new blade and tighten the two screws. These pinchweld scrapers are made of spring steel and are hard enough so they will not...

Reference: Z1022

Cold knife blade

This special blade reaches the urethane between the wheel cover and the side of the windshield.Its unique shape allows you to unbond the windshield with a cold knife, without having removed the wheel cover (also bond) before. Once the windshield is removed, you can unbond the wheel cover, wihtout risking to damage the remaining material.- Sold...

Reference: EGK150

Pneumatic knife: EQUALIZER ® Ninja GT Deluxe

The Ninja™ GT Deluxe is the improved and reinforced version of the famous Ninja™ pneumatic knife. Designed for the most demanding cold cutting applications, it features two ball bearings, a more powerful motor and an exhaust silencer that redirects air away from the vehicle for optimal working comfort. Exceptional performance and versatility: Optimized...

Reference: GRAISSE-JOINT

Rubber gasket grease - 1kg

Optimize the maintenance and durability of rubber seals with our Rubber Seal Grease - 1kg, a product specially designed for bodywork professionals and garages. Applications: Ideal for maintaining door, trunk and windshield seals. Protects seals subjected to extreme thermal variations, UV and chemical exposure. Reduces squeaking and improves joint...

Reference: 3007-K

Adjustable REPAREGLASS cold knife

The adjustable REPAREGLASS cold knife is designed to offer efficiency, speed, and precision when cutting. Thanks to its adjustment lever, you can extend or retract the blade in one simple movement, easily adjusting the cutting depth without having to unscrew the retaining nut. No more wasted time: this innovative system saves you considerable time while...

Reference: Z8

Cold knife blade coated, extra fine 25 mm

Cold knife blade coated, extra fine - Sold individually- Cutting length: 25 mm- 20gCARTON OF 10

Reference: RAPTOR

Windshield cutting system with automatic vacuum - RAPTOR

The  Raptor™ is a cord and wire auto glass removal device designed from the ground-up to dramatically improve the power of the vacuum cup with the integration of our AirForce™ Constant Vacuum Cups. This technology has been specifically developed to create a quick placement and constant vacuum to the glass so the Raptor™ stays in place and resists...

Reference: CROR-S

Brand: REPAREGLASS

Ball-tipped hook, with short shaft

Ball-tipped hook, with short shaft- 210 x 35 x 35 mm - 122 g