VBSA awarded ECOVADIS label
Banner
This special blade reaches the urethane between the wheel cover and the side of the windshield.
Its unique shape allows you to unbond the windshield with a cold knife, without having removed the wheel cover (also bond) before.
Once the windshield is removed, you can unbond the wheel cover, wihtout risking to damage the remaining material.
- Sold individually
- 129 x 59 x 20 mm
- 20 g
CARTON OF 5
This blade series enables you to use a cold knife where you could never use it before ! The 60 mm long blade is Special cold knife blade 30 mm, made of stainless steel, use |
Special cold knife blade 30 mm
€0.00 |
|
This blade series enables you to use a cold knife where you could never use it before ! The 60 mm long blade is intended to cut all those hard to reach PU bondings that Special cold knife blade 60 mm, made of |
Special cold knife blade 60 mm
€0.00 |
This special blade reaches the urethane between the wheel cover and the side of the windshield.
Its unique shape allows you to unbond the windshield with a cold knife, without having removed the wheel cover (also bond) before.
Once the windshield is removed, you can unbond the wheel cover, wihtout risking to damage the remaining material.
- Sold individually
- 129 x 59 x 20 mm
- 20 g
CARTON OF 5
Reference: Z1022
This special blade reaches the urethane between the wheel cover and the side of the windshield.Its unique shape allows you to unbond the windshield with a cold knife, without having removed the wheel cover (also bond) before. Once the windshield is removed, you can unbond the wheel cover, wihtout risking to damage the remaining material.- Sold...
Reference: Z30
This blade series enables you to use a cold knife where you could never use it before ! The 60 mm long blade isintended to cut all those hard to reach PU bondings that are far away from the glasses edge and where a normalcold knife blade could never reach. But also all lowerglass edges with surmounting wings and bonnets are aperfect field of application...
Reference: Z60
This blade series enables you to use a cold knife where you could never use it before ! The 60 mm long blade is intended to cut all those hard to reach PU bondings thatare far away from the glasses edge and where a normalcold knife blade could never reach. But also all lowerglass edges with surmounting wings and bonnets are aperfect field of application...
Reference: AIG-300-N50
In average condition Only a few minor cosmetic defects - 1 Only one available 2nd LIFE warranty: 6 months Locking lever for wire The long, thin shaft of the locking lever for piano wire allows it to be positioned so as to avoid any damage to the dashboard, hubcaps or bodywork. Recommended especially for cars with steeply raked windshields, where the...
Reference: SGR-380-N122
In average condition Only a few minor cosmetic defects appear - 1 Only one item available 2nd LIFE guarantee: 6 months An essential tool for quickly and efficiently preparing glass surfaces, this scraper is mainly used to thoroughly remove adhesive residue before reinstalling glass. It can also be used as a scraper to remove labels or other adhesives....
Reference: CAISSE-N399
In very good condition Only a few minor cosmetic flaws - 9 units available 2nd LIFE warranty: 6 months Storage case Length: 44cm - Width: 17cm - Height: 19cm
Reference: ECL784
This high-performance lubricant is specially formulated to optimize the performance of your cutting tools. Suitable for all cutting devices, it effectively reduces friction between the blade and the sheath, limiting premature wear, improving cutting precision, and extending the life of your equipment. Ideal for professional or domestic use, it ensures...
Reference: DEV-ROLL-N-CUT
A suction-cup-mounted piano wire reel, which is positioned on the windscreen and allows the wire to be inserted all around the windscreen completely independently. Not compatible with ZLN-914.
Reference: Z6
Cold knife blade, extra fine - Sold individually - Cutting length: 38 mm - 20 g CARTON OF 10
Reference: WP738-E
Used to remove urethane and butyl from the pinchweld. The tool has a hardened steel blade of 24 mm wide that can be sharpened dozens of times. - 200 x 29 x 29 mm - 120 g
Reference: PILE-RAPTOR522
Battery pack for RAPTOR kit Warning: these batteries are compatible with RAPTOR kits from serial number R0005372 upwards. For kits purchased before this number, you will need to order the reference PILE-RAPTORX4.
Reference: 113656
Set of 4 wheels for handble rolling tool-box (Ref. CS-RC14)
Reference: LFA-402
flexlight mini torch with flexible shaftA screw has been lost? There is a leak in the engine compartment? A connector is hidden under the dash? This mini torch with flexible shaft will give you the needed light-in dark or hidden places. It can even become one of the most useful tools to you. Needs two LR6/AM3/AA batteries (delivered without batteries ).-...
Reference: RCH-163
The REPAREGLASS flexible pull handle with neoprene coating is designed for comfortable and safe use during cold cutting. It has the same features as the classic ZDK-395 handle, with the added advantage of a neoprene coating that improves grip while protecting painted surfaces on the vehicle. Perfect for use with ZDK-395 cold cutting knives, this flexible...
Reference: DSS-175
One-man wire cut-out toolREPAREGLASSOne-man wire cut-out toolThis tool acts like another person sitting inside the vehicle pulling the wire back after you havemade your cutting stroke.Attached to the swivel is a spring that acts as a second person; you pull the wire out to make your cut and the springs pulls the wire back in. The spring is attached to a...
Reference: Z5
Cold knife blade, extra fine - Sold individually - Cutting length: 25 mm - 18g CARTON OF 10
Reference: CAISSE-N396
In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Storage case Length: 44cm - Width: 17cm - Height: 19cm
Reference: FB097-DESTOCK
FEIN curved blade - Z curve, with fixed depth stop Total length: 125 mm - Length of cutting edge: 58mm Unit
Reference: ZAW-040
REF. ZAW-040Arm wiper puller toolArm wiper puller tool with tighting screw for a simpleuse ( without additional tool)Adaptable for many cars
Reference: WFA-500
REF. WFA-500Arm Wiper pullerArm wiper puller especially designed forVolkswagen rear window models, Audi, Skoda,Seat, but also many others.Untight the button from the arm but do not release it( could caused damages on the plasticcompartments of the arm.) Position the jaw on thearm of the wiper, tight manually first, then use aratchet 3/8 to strongly tight...
Reference: Z9RV
Nylon coating protects exposed paint from accidental blade contactIdeal for exposed glass with underside molding or encapsulationOffers the control a technician needs to cut awayfrom the glass or moldingAvailable in 3 lengths : 19 mm – 25 mm – 38 mm
Reference: Z4
Cold knife blade, extra fine cutting length: 19mm CARTON OF 10
Reference: GCC-506
Glass run channel cleanerIf you have ever cleaned glass out of a glass run channel, you know the problem. Broken pieces of tempered glass will hide behind the lip of the glass run chanel and scrape the door glass when you roll it up or down. The glass run channel cleaner reaches behind that lip to remove even the most stubbornly-wedged pieces of glass...
Reference: PSI-200
Effectively protect the interior of your vehicles with this one-piece double seat cover, ideal for automotive professionals. Applications : Ideal for workshops, garages and car cleaning services. Also suitable for jobs requiring temporary protection of vehicle interiors.
Reference: FSC1.7BAT-SET
Set of 2 18V - 5A batteries + 1 charger for FEIN FSC1.7 cordless knife Optimise the runtime and power of your FEIN cordless knife with this high-capacity Li-ion battery. Designed for demanding professionals, it delivers reliable performance and extended runtime for intensive work. Key features of the battery: 18V voltage: Optimal power to meet the needs...
Reference: VKD-44EXP-DESTOCK
Only 81 pieces in stock SQUARED CUTTING WIRE in a spool Surprising but true! The cutting resistance of the squared wire is far higher than the one of the common round wire. Try it, you will see!Squared wire - 0,6 x 0,6 mm,- length: 44m, on plastic spool.- 100 x 22 mm - 110 g
Reference: WK24ZRS
BTB blade, 150mm for encapsulated curved glass
Reference: WP738-E-N118
In good condition Cosmetic defects shown in photos - 1 Only one item available 2nd LIFE warranty: 6 months Designed to effectively remove polyurethane residue, this scraper is an essential tool for professionals who install and remove glass. Equipped with a 24 mm wide hardened steel blade, it offers excellent durability and can be sharpened many times,...
Reference: Z3
Cold knife blade, extra fine- Sold individually- Cutting length: 38 mm- 20 gCARTON OF 10
This special blade reaches the urethane between the wheel cover and the side of the windshield.
Its unique shape allows you to unbond the windshield with a cold knife, without having removed the wheel cover (also bond) before.
Once the windshield is removed, you can unbond the wheel cover, wihtout risking to damage the remaining material.
- Sold individually
- 129 x 59 x 20 mm
- 20 g
CARTON OF 5
