Reference: 945
Brand: REPARBRISE
Square mirror REPARBRISE (Plexiglass)
Reparbrise 945 Plexiglas square mirror for repairing windscreen impacts. This mirror allows you to view the impact throughout the repair process. Dimensions: 9.5cm x 9.5cm
Filter By
Packaging
Packaging
Brand
Brand
There are 59 products.
Reference: 945
Brand: REPARBRISE
Reparbrise 945 Plexiglas square mirror for repairing windscreen impacts. This mirror allows you to view the impact throughout the repair process. Dimensions: 9.5cm x 9.5cm
Reference: 940
LED lighted mirror (glass) for repairing windshield impacts, this mirror allows you to visualise the impact throughout its repair, it has LED lighting. Size. 6.5cm x 4cm
Reference: 959
Brand: REPARBRISE
Carbide-tipped pen, used to remove surface impurities on the impact before repairing it.
Reference: 969
Large probe, for perfect centring of the repair and easier resin injection.
Reference: 979
Brand: REPARBRISE
Our 979 pen light provides a better view of the impact injection during the repair of your windshield.
Reference: 985
Vaccum plug to remove impurities from the windshield impact. Diameter 3cm The Vaccum plug is used with the vacuum pump ref.993.
Reference: 974
The syringe ref.974 will allow you to take the injection resin from inside the bottle or pipette and then inject it into the injector. You can also use the syringe to fill drill holes and cracks in your Windshield.
Reference: RS-2030
Resin dispenser pack consisting of 5 syringes and 3 needles. The RS-2030 syringe lets you remove the injection resin from the bottle or pipette and inject it into the injector. You can also use the syringe to fill drill holes and cracks in your windscreen.
Reference: 645
Brand: REPARBRISE
12V carbide drill supplied with integrated chuck lock, for drilling the impact point on your windshield before injecting the resin. Use with our 934, 4509w and 701 carbide drills. This drill can also be used with a felt for polishing the impact after repair. 4M cable extension
Reference: 10357
Rechargeable 7.2V carbide drill delivered with battery and charger, for drilling the impact point on your Windshield before injection of the resin. Use with our 934, 4509w and 701 drills. This drill can also be used with a felt pad (ref.971) to polish the impact after repair.
Reference: PMP-ADVANTAGE
Brand: REPAR'VIT
The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump will inject the resin uniformly into the impact.
Reference: 993
Brand: REPARBRISE
Vacuum pump delivered with hose ref.996 (quick connector on injector side and direct connection on pump) The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump...
Reference: 1110
Brand: REPAR'VIT
The pressure vacuum pump 1110 is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump will inject the resin uniformly into the impact.
Reference: 272
Crack spreader bar for windshield repairs. This tensioning bar helps to stabilise the crack during your repair.
Reference: 226
Ballbreaker for your own training. This tool is specially designed to create an impact on a test windscreen, when you want to train new colleagues or as part of windscreen repair training.
Reference: LP10
Plastic magnifying glass (15x zoom) with transparent base. Excellent tool for identifying the type of impact, but also for viewing the impurities contained within it.
Reference: ADAPT-PBV
ADAPTER FOR VERTICAL OR INVERTED GLAZING Truck, bus, tractor, public works, combine harvester type.... The adaptor enables repairs to be carried out on vertical windscreens with a negative tilt of up to 20°. For use with injector 994, our 9620 bridge for TERMINATOR 1 and 2 cases, and 1320. Not compatible with FIX-2001, 2000, 367 and 51 bridges, cannot be...
Reference: 994
Brand: REPARBRISE
Injector allowing you to inject windshield repair resin using a pressure vacuum pump. Used in KIT-1320 - TERMINATOR 1 AND 2, fits perfectly with our vertical or reversed windshield adaptor ref. ADAPT-PBV. It is suggested that you also order the injector to avoid leaks due to wear of the seal: - To replace the seal in contact with the windshield, use ref....
Reference: 3200
Brand: REPARBRISE
REPAIR injector composed of a high quality cylinder + piston. Composed of 5 lips which allow an additional depression and a faster repair. Adapts to our injection bridges ref.51 and 9620. To avoid any leaks due to seal wear, we recommend that you also order the interchangeable end caps ref 3202 when purchasing the injector.
Reference: 3202
Brand: REPARBRISE
Exchangeable nozzles for REPARBRISE 3200 injector (pack of 5). When you repair a windshield impact, it's important that the injector has uniform sealing when the resin is injected. It is now essential to change the nozzle of the 3200 injector as soon as it becomes damaged.
Reference: 994CLAP
Brand: REPAREGLASS
Inox 994 injector plunger for windshield impact repair
Reference: FIX-2044
Brand: REPAR'VIT
Metal injector for windshield repair resin injection for FIX -2001 injection bridge
Reference: FIX-5035
Brand: REPAREGLASS
Plastic screw for injection bridge FIX-2001 allows the bridge to be adjusted to create a uniform sealing.
Reference: FIX-2006
Brand: REPAR'VIT
Standard resin filling chamber for REF-2000 bridge Ø 0,9 cm
Reference: FIX-2005
Brand: REPAR'VIT
Large impact resin filler injector for REF-2000 Ø 1.5 cm bridge.
Reference: 5095
Brand: REPARBRISE
Standard injector for kit ref.1330 and kit ref.1330SPECIAL. Supplied with seal, not compatible with our old 1310 kit.
Reference: 5096
Brand: REPARBRISE
Large impact injector for kit ref.1330 and kit ref.1330SPECIAL. Supplied with seal, not compatible with our old 1310 kit.
Reference: FIX-2025
Brand: REPAR'VIT
Replacement piston for our bridges REF-2000, REF-367, REF-9620, and our suction cup REF-GEZ-543-1.
Reference: SATELLITEDEPONT
Satellite for 3200 injector for manual injection of crack resin to repair cracks in windscreens (including rubber and leg protection).
Reference: 617
Cylinder vacuum nozzle. Removes air trapped in the impact. Supplied with specific hose without connection and a smaller diameter. (for use with the 3200 cylinder and 993 vacuum pump).
Reference: FIX-5063-DESTOCK
Brand: REPAR'VIT
Aluminium screw for injection bridge 367, holds injectors 5095 and 5096 to the windshield to ensure a seal during resin injection.
Reference: 818
The WINDSHIELD HEATER warms the repair area, usb powered, supplied with adapter + 5 thermometers Ref. 961 12v cigarette lighter and 220v mains, 2.5m cable, ideal for impact repairs, red or black depending on availability.
Reference: IFA-300
Infrared thermometer for checking the temperature on your Windshield.
Reference: HOS-2001
Nylon cleaning brush for HOS-2000 connection hose, for cleaning excess windshield repair resin.
Reference: HOS-2002
Nylon cleaning brush for injector 5069 or 5062 to clean excess injection resin from the windscreen
Reference: 996
Brand: REPARBRISE
Connection hose with quick-fit connector (female on 1 side only) suitable only for 993 vacuum pump and 994 injector. Length: 1M
Reference: HOS-2000
Connection hose for vacuum pump 1110 and PMP-ADVANTAGE and injector 5095 or 5096 for windshield repair. Length: 1M
Reference: HOS-1000-T
Vacuum pump connector hose for TERMINATOR 1 and 2 kits - Ideal for repairing impacts on the Windshields of utility vehicles, trucks, buses, trams, etc.... Length: 2.50 M
Reference: HOS-2000-L
Long connection hose for bus and truck, vans, trams, etc... compatible with 1110 and PMP-ADVANTAGE vacuum pumps, our 5095 and 5096 injectors. Used in our 1330 and 1330SPECIAL kits, not compatible with our 1320 and TERMINATOR 1 and 2 kits. Length : 2.50M
Reference: 961
Brand: REPARBRISE
Thermometer strip To define the temperature of the windshield before operate. Scale 8°-34°C
Reference: 161
Brand: REPAREGLASS
Extension cable for batteries. To put on the cigar lighter.
Reference: 499
Cigar-lighter power strip. Allows you to recharge appliances such as UV lamps, drills, hoovers, etc. Ideal for buses and trucks.
Reference: 524
Brand: REPARBRISE
24V/12V voltage transformers for buses and trucks
Reference: 538
Large-format 30 x 40 cm UV screen to protect against ultra-violet light during repairs. Used by the bus and truck industry.
Reference: 539
Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm
Reference: 931
Brand: REPARBRISE
Single U.V. neon 135 mm - 931- for 1046 and UVB-150 lamp
Reference: 946
Brand: REPARBRISE
Warning: sold without seal, seal reference in stock 983 Adapter for repairing large impacts, it adapts to our 3200 and 994 injectors to enable you to repair large impacts on the windshield. It can be used with our 1320, 951 and TERMINATOR 1 and 2 kits.
Reference: 977
Brand: REPARBRISE
Large-format 30 x 20 cm UV screen to protect against ultra-violet light during repairs.
Reference: FLEXI-BLADE
Flexible wiper blade made in silicone. Allow to ease the removal of the water from surface to be dried. Appliable on the glass and metal.
Reference: 994CLAP
Brand: REPAREGLASS
If you have problems with leaks on the top nozzle of the 994 injector, you will need to change the small black seal inside the 994CLAP plunger. Seal for 994CLAP plunger for 994 injector
Reference: 995
Brand: REPARBRISE
994 injector seal provides a uniform seal for injecting resin into the impact during Windshield repair. It is important to change the seals frequently. Available individually or in packs of 10.
Reference: 983
Brand: REPARBRISE
Seals (X2) for large impact adapter 946. It is important to change the seals regularly to ensure a good seal when injecting the Windshield Repair Resin.
Reference: 5BX-02010
Ø 1.5 cm seals for large impact injector 5096 and FIX-2005. It is important to change the seals regularly to ensure a good seal when injecting windshield repair resin. 1 bag of 5 pieces
Reference: HOS-2010
Set of 2 replacement rubber seals for HOS-2000, HOS-2000-L and HOS-1000-T hose It is important to change the rubber seals frequently to ensure that the windshield repair resin is injected correctly. The rubber seal is situated inside the connector on your hose. If there is a leak in the hose, you can change the seal by using a wrench and unscrewing the...
Reference: 5BX-2016
Ø 0.9 cm rubber seals for large impact injector 5095 and FIX-2006. It is important to change the seals regularly to ensure a good seal when injecting windshield repair resin. 1 bag of 5 pieces
Reference: DPG
It's imperative to test the calibration of your vacuum pump at minimum once a year, to ensure quality repairs for your customers. French Standard regulation NF R61-980... Frequency of use: once a year. This new regulation allows to ensure that the pressure and vaccum cycles made from the pump are correct ( Pressure tolerance is 0,1 Bar) in order to avoid...
Reference: TER-BATTERIE
Brand: TERMINATOR
Battery for TERMINATOR 1 and 2 Kit and ULTRAPOSE EVOLUTION. You can recharge this battery directly on the TERMINATOR or ULTRAPOSE EVOLUTION, using our TER-CHARGEUR charger.
Reference: TER-CHARGEUR
Brand: TERMINATOR
Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits. Connect the charger to your TERMINATOR or ULTRAPOSE EVOLUTION to recharge the battery.
Reference: 512
Miniature 220V/12V cigarette-lighter voltage transformers, for recharging equipment with a cigarette-lighter connector. Ex. UV lamp, drill, etc.