SET OF WHEELS - TOOL-BOX

Reference: MAILLET

Rubber hammer

Reference: Z4

Cold knife blade, extra fine 19 mm

Cold knife blade, extra fine cutting length: 19mm CARTON OF 10

Reference: PAIG-200

Wire gripping handles (corkscrew shape)

Wire gripping handlesIdeal solution to work rapidly and without problem. Feed the wire through the hole in the wedge shaft (fig A), loop it through the hole at the top of the shaft (fig B) and then bring it back into the large plastic handle. By pressing the wedge back into the handle, the wire is held in place (fig C). To shorten the wire, press down on...

Reference: CROR-S

Brand: REPAREGLASS

Ball-tipped hook, with short shaft

Ball-tipped hook, with short shaft- 210 x 35 x 35 mm - 122 g

Reference: CROP-L

Brand: REPAREGLASS

Pointed hook, with long shaft

Pointed hook, with long shaft- 270 x 35 x 35 mm- 110 g

Reference: CZ-444

Clip removal tool

Reference: SK150

Replacement blade for fsl 240 pinchweld scraper l:19mm

Replacement blade for fsl 240 pinchweld scraper l:19mm

Reference: RK-100A

Squeegee blades for glass and plastic

These squeegee blades offer an effective solution for cleaning and preparing glass and plastic surfaces. Ideal for removing adhesive residues, paint or stubborn dirt, they guarantee precise, careful work without damaging delicate surfaces. These blades combine durability and safety. Their razor-sharp cutting edge ensures optimum use for all workshop...

Reference: L2

Olfa® knife

Olfa®knife This knife is made of high impact plastic, has a stainless steel blade housing and a positive locking thumb wheel so that you can set the blade at any length. The back of the knife features a rubber grip that lets the knife rest comfortably in your hand and keeps it from slipping. The famous model. - 146 x 40 x 20 mm - 110 g

Reference: MS-180

Installation stick

Reference: PSL-150-1

Suction cup deluxe sold individualy (Ø 150 mm)

Suction cup deluxe sold individualy (Ø 150 mm)Easier and safer to attach that common suction lifters with clamp lever technology.The bell shaped rubber pads already adhere onto the glass surface with slight pressing even before pressing the lever.Possibility to pass a belt through. Load capacity for each lifter is 80 kg.

Reference: V80

Manual caulking gun - 310ml cartridge - 400ml saussage

Reference: 3317

LOCTITE 317 glass/metal bonding kit for bodywork repairs and glass bonding

Glass and mirror bonding adhesive (26 ml) with primer activator (150ml). Bodywork repair - Bonding glass - Glass-to-metal bonding For fixing mirror bases, deflector locks and any glass/metal or metal/metal assembly. Advantages : Suitable for bonding rigid, close-fitting metal or ceramic assemblies The product polymerises in the presence of the activator,...

Reference: 1336

Mirror repair adhesive pads -1336

Adhesive pads used by equipment manufacturers for interior rear-view mirrors. For interior mirrors Pack of 100 stickers.

Reference: VKD-22A

Brand: REPAREGLASS

Squared cutting wire - Size 0.6mm - 22ML

Squared cutting wire REPAREGLASS Surprising, but true! The cutting force of square wire is far superior to that of common round wire. Try it out for yourself, you'll be amazed! REF-VKD-22 Square wire. 0.6 x 0.6 mm, length: 22 m, wound on plastic spool. 691 NEWTON

Reference: TB-102

Rope insert tool length of the rope: 9m (pour bus et poids lourds)

Rope insert tool.For the replacement of non-bonded windshields with rubber mouldings.The toll is delivered with a very resistant rope, the length of which (6 m) is enough. Can be used with private cars and trucks.

Reference: CT-749

Window and door clip removal tool

Window and doorclip removal toolThis tool is used to remove clips that are used with Opel and Ford brands, as well as with most of other vehicles that have clips.- 250 x 58 x 32 mm- 130 g

Reference: RTD-499

Pair of ratcheting tie downs - length: 5m

Pair of ratcheting tie downsRatcheting tie downs are used by glaziers to secure freshly bonded-in glasses.Use these ratcheting tie downs together with our suction cups so as to hold vertical-glazed glasses in place while the urethane cures. The ratcheting tie downs are simply passed through the handles of the vacuum cups and tight-ened.- 165 x 165 x 10 mm...

Reference: PTB

HDPE” standard dashboard protector

Avoids snagging the dashboard with the piano wire during cutting Move everything along the path of your piano wire

Reference: 6200

Reinforced black fibrous adhesive tape 50mm

For protection of all sensitive surfaces (mudguards, hood corners or headlining during windscreen cutting)! Adhesive tape is also very effective for securing windows that have just been installed, preventing them from sliding down after installation.

Reference: ULB-582

TRAPEZOIDAL BLADES (x 10 )

Trapezoidal blades ( x 10 )

Reference: GBM-446

Set contain 5 specially shaped sticks for prying, smoothingspreading, and removing

This set contain 5 specially shaped sticks for prying, smoothingspreading, and removing. They will help you overcome anysituation no matter how complicated. Each tool is made of atough, flexible, polycarbonate material that makes it almostimpossible to break. The set comes in a clamshell package thatkeeps your tools organized in your toolbox.

Reference: JEU-ETOILE-P

Tamperproof star wrench set ( 10 pcs )

Reference: 7002140

Diagonal cutting plier 150 mm

Reference: 614020

Hand socket and bit set (59 Pièces) 3/8"

Reference: WFA-525

Arm wiper puller for rearwindows.

Arm wiper puller for rearwindows.To avoid to damage the arm wipersfrom rear vehicules, which are oftendamage with traditional arm wiper pullersEx: Peugeot 307-207, Renaultclio III, Espace Laguna, Megane,Nissan Micra et primera

Reference: DST-734

T-handle wire threader with hole

REF-DST-734 T-handle wire threader with hole Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.120 x 26 x 10 mm • 20 g

Reference: SK120

Replacement blade for fsl 240 pinchweld scraper l:13mm

Replacement blade for fsl 240 pinchweld scraper 13mm wide

Reference: SK130

Replacement blade for fsl 240 pinchweld scraper l:16mm

Replacement blade for fsl 240 pinchweld scraper l:16mm

Reference: 702611200

Chain nose plier with cutter 200 mm

Reference: PORTE-CT

Adhesive sticker holder for car inspections - pack of 100

Adhesive sticker holder for neutral technical inspection Our sticker holders are completely self-adhesive over their entire surface. Pack of 100 sticker holders (75 x 75mm)

Reference: CS-RC14

Handable rolling Tool-box

Toolbox on wheels Size: L:62 x W:30 x H:32 cm + 10cm in height with wheels 4 drawers of 22 x 20cm

Reference: CS-RC

TOOL-BOX WITHOUT ROLLING

Reference: ZAW-095

Arm wiper puller tool

Arm wiper puller tool

Reference: 320040

Ratchet cardan

Reference: 320075

Small extension 75 mm for ratchet

Reference: 320200

Large 200 mm ratchet extension

Reference: 323204

Socket 4mm

Reference: 323205

Socket 5mm

Reference: 380371

Small ratchet 3/8 - 140mm

Reference: RUBAN-ADHESIF

Double-sided adhesive tape (6-12-19-25mm x 10ml)

This high-quality double-sided adhesive tape is the ideal tool for automotive professionals, designed specifically for bonding exterior and interior vehicle components. Perfect for attaching decorative trim, emblems, monograms, bumper beads, gaskets and other accessories, it offers a powerful, long-lasting bond that stands up to the demanding conditions...