Cold knife blade coated, extra fine 25 mm

Reference: Z30

Special cold knife blade 30 mm

This blade series enables you to use a cold knife where you could never use it before ! The 60 mm long blade isintended to cut all those hard to reach PU bondings that are far away from the glasses edge and where a normalcold knife blade could never reach. But also all lowerglass edges with surmounting wings and bonnets are aperfect field of application...

Reference: CROP-L

Brand: REPAREGLASS

Pointed hook, with long shaft

Pointed hook, with long shaft- 270 x 35 x 35 mm- 110 g

Reference: FB121

Cutting blade, straight - 26mm

Cutting blade, straightCutting length: 26 mmSold individually

Reference: CAISSE-N396

Storage case L: 44 cm x H: 17 cm x W: 19 cm - 2nd LIFE - N396

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Storage case Length: 44cm - Width: 17cm - Height: 19cm

Reference: FSC1.7QBAT

FEIN battery knife + 12 blades

Optimize your cutting tasks with this FEIN battery-powered knife, a high-performance tool designed to meet the needs of demanding professionals. Supplied with a complete set of 12 blades, two batteries and a charger, it offers everything you need for precise, efficient cutting. Key features: Exceptional versatility: Suitable for a wide variety of jobs...

Reference: DST-58

Curved wire threader 58 mm (package at 3 pièces)

Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...

Reference: SGR-380

Glass scraper, with 1 RK-100A blade

Glass scraper with 1 RK-100A bladeMainly used to rapidly and entirely remove bond residues on windows that will be reinstalled. Also used to remove stickers. Simply replace the old blade by a new one, no sharpening needed.

Reference: DLH-511

Double-end moulding release tool

Double-end moulding release tool This heavy-duty tool is made of steel so it will not bend. It has a small rubber spacer through each end to the tool up off the glass about 1 mm. This is important for two reasons. First, it prevents the tool from scratching the glass. Secondly, it holds the end above the glass so there is less chance the tip will catch...

Reference: CTD-607

Recessed Cowling Clip Remover

Recessed Cowling Clip RemoverSome self-locking cowling clips are recessed down into the cowling. They are not the type that look like a Phillips or TORX®screw, but are the type that can be removed with a tool like the CGE-148. The only problem is the TPE657 will not reach downinto the recessed area and go under the head of the clip. If you manage to force...

Reference: CM-536

Magnetic bowl

Magnetic bowlThe bowl can be placed almost everywhere on a vehicule because the bottom has a rubber cover to avoid scratches. The strong magnet surely holds thebowl itself and all magnetic content.Diameter:140 mm

Reference: PILE-RAPTOR522

Battery pack for RAPTOR Kit

Battery pack for RAPTOR kit Warning: these batteries are compatible with RAPTOR kits from serial number R0005372 upwards. For kits purchased before this number, you will need to order the reference PILE-RAPTORX4.

Reference: PSD12

Parer blades diam.12mm

Parer blades (scraper not include) REF-PSD-12 Blade diameter 12 mThese parer blades are especially good for cleaning the pinchweldfrom excessively applied polyurethane in curves and corners.Thereby the special shape reduces the risk of damaging the paintcompared to standard scraper blades. The blades are suitable for ourscraper tools FSC-300SPECIAL and...

Reference: WK2S

Serrated, average, universal, flat BTB blade, 240mm

Serrated, average, universal, flat BTB blade, 240mm

Reference: Z11RD

New COLD KNIFE BLADES SERRATED 25mm

REF-Z11RDNew ULTRAWIZ Cold knife bladeSold individually - Extra thin Cutting length: 25 mmCARTON OF 10

Reference: DSS-175

One-man wire cut-out tool

One-man wire cut-out toolREPAREGLASSOne-man wire cut-out toolThis tool acts like another person sitting inside the vehicle pulling the wire back after you havemade your cutting stroke.Attached to the swivel is a spring that acts as a second person; you pull the wire out to make your cut and the springs pulls the wire back in. The spring is attached to a...

Reference: FB157

Hook blade with U shape - 60 mm

LAME A CROCHET EN U - 60 mm

Reference: AIG-789

Straight wire threader

Many technicians remove windshields by starting the wire through the top and bottom center of the windshield, then cutting towards each side. So as to push the cutting wire into the urethane, especially where there is a wide surface of urethane, we recommend using the wire threader. The slot (1,2 mm only) and the cutting wire are pushed together into the...

Reference: FSC1.7POIGNEE

Pull handle for FEIN battery-powered knife

Highly recommended for optimal handling and better cutting control, this handle improves the precision and stability of the tool, especially during complex or prolonged cutting tasks. An essential accessory for getting the most out of your FEIN cordless knife.

Reference: FSC-300SPECIAL

Brand: REPAREGLASS

Special scraper

REF. FSC-300SPECIALSCRAPER (without blade)To scrape the old urethane bead. This scraper is universal due to thefact it can accept different blades width ( 13 mm – 16 mm – 20 mm)and angular blades

Reference: CGE-148

Clip removal tool

Clip removal tool This tool is used to remove plastic clips on door linings. It fits easily down into the recessed area and then can slid under the head of the cowling clip. You then pull up on the center locking part and the clip can be removed. - 235 x 35 x 30 mm - 165 g

Reference: FB101

Hook blade with U shape - 60mm

REF-FB-101 Hook blade with U shapeCutting length: 60 mmSold individually

Reference: AIG-125

T-handles wire threader

Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.- 120 x 26 x 10 mm - 20 g

Reference: Z6

Cold knife blade, extra fine 38 mm

Cold knife blade, extra fine - Sold individually - Cutting length: 38 mm - 20 g CARTON OF 10

Reference: GCC-506

Glass run channel cleaner

Glass run channel cleanerIf you have ever cleaned glass out of a glass run channel, you know the problem. Broken pieces of tempered glass will hide behind the lip of the glass run chanel and scrape the door glass when you roll it up or down. The glass run channel cleaner reaches behind that lip to remove even the most stubbornly-wedged pieces of glass...

Reference: FSC1.7BAT-SET

Set of 2 x 18V - 5A batteries + 1 charger for FEIN FSC1.7 cordless knife

Set of 2 18V - 5A batteries + 1 charger for FEIN FSC1.7 cordless knife Optimise the runtime and power of your FEIN cordless knife with this high-capacity Li-ion battery. Designed for demanding professionals, it delivers reliable performance and extended runtime for intensive work. Key features of the battery: 18V voltage: Optimal power to meet the needs...

Reference: CAISSE-N397

Storage case L: 44 cm x H: 17 cm x W: 19 cm - 2nd LIFE - N397

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Storage case Length: 44cm - Width: 17cm - Height: 19cm

Reference: DESTOCK-UW-4018

Knife with 1 blade - steel with plastic handle

Knife with 1 blade - steel with plastic handle, for use with TKS-100 blades

Reference: CT-749

Window and door clip removal tool

Window and doorclip removal toolThis tool is used to remove clips that are used with Opel and Ford brands, as well as with most of other vehicles that have clips.- 250 x 58 x 32 mm- 130 g

Reference: KIT-BTB

BTB kit (automatic PB cutting)

The BTB Kit is a complete, high-performance pneumatic solution for cutting windshields quickly and efficiently, whether from inside or outside the vehicle. Designed to minimize physical effort, its ultra-lightweight knife (1.1 kg) ensures easy and comfortable handling, even during long jobs. Very quiet and compliant with European Directive 2002/44/EC on...

Reference: CG-200-GVF

Pneumatic cut-out + 6 blades

The Standard Pneumatic Rubber Cutter is designed to quickly and effortlessly remove windshields by cutting through adhesive with its efficient oscillating blades. Its built-in speed regulator allows for precise control during use, while the blades can be adjusted to 12 different positions to suit all configurations. Compact and easy to maneuver, it is...