
Reference: Z1
Cold knife blade 19 mm
Cold knife blade- Sold individually- Cutting length: 19 mm- 18gCARTON OF 10
Cold knife blade, extra fine - Sold individually - Cutting length: 38 mm - 20 g CARTON OF 10
![]()
![]() REF-Z10RD |
New COLD KNIFE BLADES SERRATED 19mm
€0.00 |
|
![]()
![]() REF-Z11RD |
New COLD KNIFE BLADES SERRATED 25mm
€0.00 |
|
![]()
![]() New ULTRAWIZ Cold knife blade |
New COLD KNIFE BLADES SERRATED 38mm
€0.00 |
|
![]()
![]() Nylon coating protects exposed paint from accidental blade contact |
New Paint Protection Reverse Bend Blade 19mm « ULTRAWIZ »
€0.00 |
|
![]()
![]() Nylon coating protects exposed paint from accidental blade contact |
New Paint Protection Reverse Bend Blade 25mm « ULTRAWIZ »
€0.00 |
|
![]()
![]() Nylon coating protects exposed paint from accidental blade contact |
New Paint Protection Reverse Bend Blade 38mm « ULTRAWIZ »
€0.00 |
|
![]()
![]() Cold knife blade |
Cold knife blade 19 mm
€0.00 |
|
![]()
![]() Cold knife blade, extra fine |
Cold knife blade 25 mm
€0.00 |
|
![]()
![]() Cold knife blade, extra fine |
Cold knife blade 38 mm
€0.00 |
|
![]()
![]() Cold knife blade, extra fine cutting length: 19mm CARTON OF 10 |
Cold knife blade, extra fine 19 mm
€0.00 |
|
![]()
![]() Cold knife blade, extra fine - Sold individually - Cutting length: 25 mm - 18g CARTON OF 10 |
Cold knife blade, extra fine 25 mm
€0.00 |
|
![]()
![]() This special blade reaches the urethane between the wheel cover and the side of the windshield. |
Cold knife blade
€0.00 |
|
![]()
![]() Cold knife blade coated, extra fine |
Cold knife blade coated, extra fine 19 mm
€0.00 |
|
![]()
![]() Cold knife blade coated, extra fine |
Cold knife blade coated, extra fine 25 mm
€0.00 |
|
![]()
![]() Cold knife blade coated, extra fine |
Cold knife blade coated, extra fine 38 mm
€0.00 |
Cold knife blade, extra fine - Sold individually - Cutting length: 38 mm - 20 g CARTON OF 10
Reference: Z1
Cold knife blade- Sold individually- Cutting length: 19 mm- 18gCARTON OF 10
Reference: Z2
Cold knife blade, extra fine- Sold individually- Cutting length: 25 mm- 18gCARTON OF 10
Reference: Z3
Cold knife blade, extra fine- Sold individually- Cutting length: 38 mm- 20 gCARTON OF 10
Reference: Z4
Cold knife blade, extra fine cutting length: 19mm CARTON OF 10
Reference: Z5
Cold knife blade, extra fine - Sold individually - Cutting length: 25 mm - 18g CARTON OF 10
Reference: Z1022
This special blade reaches the urethane between the wheel cover and the side of the windshield.Its unique shape allows you to unbond the windshield with a cold knife, without having removed the wheel cover (also bond) before. Once the windshield is removed, you can unbond the wheel cover, wihtout risking to damage the remaining material.- Sold...
Reference: Z7
Cold knife blade coated, extra fine - Sold individually- Cutting length: 19 mm- 20gCARTON OF 10
Reference: Z8
Cold knife blade coated, extra fine - Sold individually- Cutting length: 25 mm- 20gCARTON OF 10
Reference: Z9
Cold knife blade coated, extra fine - Sold individually- Cutting length: 38 mm- 20gCARTON OF 10
Reference: Z10RD
REF-Z10RDNew ULTRAWIZ Cold knife bladeSold individually - Extra thin Cutting length: 19 mmCARTON OF 10
Reference: Z11RD
REF-Z11RDNew ULTRAWIZ Cold knife bladeSold individually - Extra thin Cutting length: 25 mmCARTON OF 10
Reference: Z12RD
New ULTRAWIZ Cold knife bladeSold individually - Extra thin Cutting length: 38mmCARTON OF 10
Reference: Z7RV
Nylon coating protects exposed paint from accidental blade contactIdeal for exposed glass with underside molding or encapsulationOffers the control a technician needs to cut awayfrom the glass or moldingAvailable in 3 lengths : 19 mm – 25 mm – 38 mm
Reference: Z8RV
Nylon coating protects exposed paint from accidental blade contactIdeal for exposed glass with underside molding or encapsulationOffers the control a technician needs to cut awayfrom the glass or moldingAvailable in 3 lengths : 19 mm – 25 mm – 38 mm
Reference: Z9RV
Nylon coating protects exposed paint from accidental blade contactIdeal for exposed glass with underside molding or encapsulationOffers the control a technician needs to cut awayfrom the glass or moldingAvailable in 3 lengths : 19 mm – 25 mm – 38 mm
Reference: CG-200NEW
Designed to remove windshields quickly and easily, this pneumatic knife cuts through adhesive using a system of powerful oscillating blades. It offers excellent speed control thanks to its integrated regulator, allowing for precise work as needed. The blades can be rotated to 12 different positions, ensuring great versatility, even in hard-to-reach areas....
Reference: CAISSE-N395
In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Storage case Length: 44cm - Width: 17cm - Height: 19cm
Reference: DST-734BUS
Special wire threader for bus and trucks with 2 holes ( for square or braided wire and nylon wire.) The end of the needle has a special designed in order to introduce easy the wire through the urethane. Push it in the urethane, insert the wire inside the tube, remove the wire threader and lead the wire throughout the urethane, in order to be able to pic...
Reference: Z30
This blade series enables you to use a cold knife where you could never use it before ! The 60 mm long blade isintended to cut all those hard to reach PU bondings that are far away from the glasses edge and where a normalcold knife blade could never reach. But also all lowerglass edges with surmounting wings and bonnets are aperfect field of application...
Reference: WK28RM
Right hand, inverted BTB blade, 25 mmManual or pneumatic use.
Reference: CS-696
EQUALIZER® ClipSaver door upholstery remover The front of the tool is tapered so it will fit easily under a clip. Spread the jaws slightly so they will go under and around the clip. Then, close the jaws and it removes the clip without damaging it. Great for the removal of door panels. - 230 x 76 x 51 mm - 205 g
Reference: AIG-300-N50
In average condition Only a few minor cosmetic defects - 1 Only one available 2nd LIFE warranty: 6 months Locking lever for wire The long, thin shaft of the locking lever for piano wire allows it to be positioned so as to avoid any damage to the dashboard, hubcaps or bodywork. Recommended especially for cars with steeply raked windshields, where the...
Reference: ZLN-914
- Multi-purpose with 1 length (approx. 2 to 4 uses) - Does not scratch surfaces - No snags on the windscreen bay or windscreen seal - Can be used with all ratchet systems - Very fine Ø 1.05 mm, Length: 100 M 2000 Newton
Reference: AEB405-N195
Kit in good condition. The case may be incomplete (blades). Only cosmetic defects shown in the photos are present. Only one item available. 2nd LIFE warranty: 6 months Recommended for cutting the lower parts of the windscreen, rear windows and quarter windows. Cutting the interior of the vehicle. Compact and lighter, it is even easier to handle,...
Reference: PILE-RAPTOR522
Battery pack for RAPTOR kit Warning: these batteries are compatible with RAPTOR kits from serial number R0005372 upwards. For kits purchased before this number, you will need to order the reference PILE-RAPTORX4.
Reference: FB101
REF-FB-101 Hook blade with U shapeCutting length: 60 mmSold individually
Reference: HB10
Heavy-duty snap-off blade- package of 10 pieces- 140 x 25 x 0.7 mm - 106 g
Reference: ZK35
The ZIPKNIFE cold knife is specially designed to provide optimal control when cutting windshields. Its unique shape keeps the cutting head firmly in place while ensuring great freedom of movement. Thanks to its ergonomic design, it allows effective force to be applied in both directions, making cutting easier even in hard-to-reach areas. This knife is...
Reference: SC313
12 mm scraper blades for ref. FSC-300SPECIAL- Package of 10 blades- 65 x 20 x 70 mm - 26 g
Reference: TRI-176
REF. TRI-176Triangular wire.0,85 x 0,85 mm,Length : 50 metersTensile strength : 691 Newton
Reference: BAT-FSC1.7
This 18 V - 2.4 Ah Li-ion battery is specially designed to power FEIN battery-powered knives of previous generations. Offering reliable and consistent performance, it is ideal for extending the life of your compatible FEIN tools. Key features: Li-ion technology: Ensures stable autonomy and fast recharging. 2.4 Ah capacity: Optimized for work requiring...
Reference: DESTOCK-PS-215
Simplify your finishing and joint removal jobs with this versatile tool designed for professionals. Key features: Dual function: Allows you to even out glue joints for a perfect finish and easily remove joints (silicone, PU). Convenient use: work is performed with one hand, saving time and facilitating handling. Precision and cleanliness: Guarantees...
Reference: PH-1355
Curved Door Upholstery Remover For removing plastic fasteners in confined places. It is the same upholstery remover as the one shown above, but it is instended for use on the front part of the door where the door jam will often interfere with the removal of the door panel. Place the notch in the tool over the fastener and pry the fastener out the hole. It...
Reference: FSC1.7POIGNEE
Highly recommended for optimal handling and better cutting control, this handle improves the precision and stability of the tool, especially during complex or prolonged cutting tasks. An essential accessory for getting the most out of your FEIN cordless knife.
Reference: 3007-K
The adjustable REPAREGLASS cold knife is designed to offer efficiency, speed, and precision when cutting. Thanks to its adjustment lever, you can extend or retract the blade in one simple movement, easily adjusting the cutting depth without having to unscrew the retaining nut. No more wasted time: this innovative system saves you considerable time while...
Reference: NMT-448
Mechanical pick up The use of telescopic magnet could be sometimes impossible to use because of non ferrous items. It is times like these when you need our Mechanical Pick-Up. It is designed with steel fingers that are spring-loaded that will grip an item up to 2,5 cm in diameter.
Reference: LB10S-50
Rigid segmented blades for L2 and XL2 cutters. Sold in packs of 50 blades. Blade size: 110 x 18 x 0.5 mm - 86 g
Reference: ZDK-500
The knife with quick blade change is the ideal tool for professionals who want to save time and work efficiently. Thanks to its quick change system, simply press the button at the base of the knife, remove the worn blade, and insert a new blade while maintaining pressure. Simple, fast, and safe. Compatible with all blades for cold cutting knives, it...
Reference: OL30
Olfa® knife, with one snap-off blade of 9 mm.Standard knives with a wide 18 mm blade are generally too wide to accomplish fine jobs. With its retractable blade of 9 mm wide, this knife allows a fine cutting with one hand.- 130 x 16 x 10 mm - 36 g
Reference: Z4
Cold knife blade, extra fine cutting length: 19mm CARTON OF 10
Cold knife blade, extra fine - Sold individually - Cutting length: 38 mm - 20 g CARTON OF 10