Metal strip: Windshield bay protection

Reference: HDW5634FEUTRE

Felt for RAPTOR device

Felt for RAPTOR device

Reference: PSD12

Bay cleaning blades (scraper not included) - 12 mm

The 12 mm diameter windshield cleaning blades are specially designed to remove excess adhesive from the windshield seal, particularly around curves and edges. Their specific shape allows for precise cleaning while minimizing the risk of damaging the paintwork, unlike standard scraping blades. Also available in 12 mm rectangular (REF-PS-12) and Ø 6 mm...

Reference: MSP-211

BOX EXTRACTOR

Arm wiper pullers kit If you remove a bolted on windshield wiper a few months after the vehicle was builtthen it is usually not difficult to remove, but try removing the wiper arm two or threeyears after it was built. It can be almost impossible because manufacturers use onetype of metal on the wiper arm and a different type of metal on the wiper post. If...

Reference: NEC398-N427-DESTOCK

Power Advance Cold Knife - N427 - Clearance Sale

Please note: Only 5 units in stock Designed with an adjustable Y-shaped mounting system and a unique blade retention system that allows for blade changes in seconds and precise depth adjustment.

Reference: SK120

Replacement blade for fsl 240 pinchweld scraper l:13mm

Replacement blade for fsl 240 pinchweld scraper 13mm wide

Reference: PAIG-200

Wire gripping handles (corkscrew shape)

Wire gripping handlesIdeal solution to work rapidly and without problem. Feed the wire through the hole in the wedge shaft (fig A), loop it through the hole at the top of the shaft (fig B) and then bring it back into the large plastic handle. By pressing the wedge back into the handle, the wire is held in place (fig C). To shorten the wire, press down on...

Reference: CORDE-TRI-N434-DESTOCK

Triangular Piano String - 0.6 mm - 50 ML - N434 - Clearance Sale

Please note: Only 11 units in stock Triangular stainless steel cutting wire 0.6 ± 0.02 x 0.06 ± 0.02 Length = 50 ml Tensile strength 240 MPa ± 100 MPa Old-generation wire

Reference: 848031AIGUILLE

Needle to guide the wire upper the metal tabs from the car

Needle  to guide the wire upper the metal tabs from the car .

Reference: CAISSE-N435

Storage Case - 2ème VIE - N435

In very good condition There are only a few minor cosmetic flaws—only 1 item available 2nde VIE warranty: 6 months Storage case Dimensions: 310MM x 170 x 135H

Reference: RK-100A

Squeegee blades for glass and plastic

These squeegee blades offer an effective solution for cleaning and preparing glass and plastic surfaces. Ideal for removing adhesive residues, paint or stubborn dirt, they guarantee precise, careful work without damaging delicate surfaces. These blades combine durability and safety. Their razor-sharp cutting edge ensures optimum use for all workshop...

Reference: DSS-175

One-man wire cut-out tool

One-man wire cut-out toolREPAREGLASSOne-man wire cut-out toolThis tool acts like another person sitting inside the vehicle pulling the wire back after you havemade your cutting stroke.Attached to the swivel is a spring that acts as a second person; you pull the wire out to make your cut and the springs pulls the wire back in. The spring is attached to a...

Reference: FB194

Hook blade 110 mm

LAME A CROCHET EN U - 110 mm

Reference: DST-58

Curved wire threader 58 mm (package at 3 pièces)

Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...

Reference: VKD-22A

Brand: REPAREGLASS

Squared cutting wire - Size 0.6mm - 22ML

Squared cutting wire REPAREGLASS Surprising, but true! The cutting force of square wire is far superior to that of common round wire. Try it out for yourself, you'll be amazed! REF-VKD-22 Square wire. 0.6 x 0.6 mm, length: 22 m, wound on plastic spool. 691 NEWTON

Reference: RAPTOR

Windshield cutting system with automatic vacuum - RAPTOR

The  Raptor™ is a cord and wire auto glass removal device designed from the ground-up to dramatically improve the power of the vacuum cup with the integration of our AirForce™ Constant Vacuum Cups. This technology has been specifically developed to create a quick placement and constant vacuum to the glass so the Raptor™ stays in place and resists...

Reference: VKD-44A

Brand: REPAREGLASS

SQUARED CUTTING WIRE in a spool- Size: 0.6mm - 44 ML

SQUARED CUTTING WIRE in a spool REPAREGLASS Surprising but true! The cutting resistance of the squared wire is far higher than the one of the common round wire. Try it, you will see!Squared wire - 0,6 x 0,6 mm,- length: 44m, on plastic spool.- 100 x 22 mm - 110 g

Reference: FB083-DESTOCK

Hook blade with U shape - 10mm

Please note: Only 5 units in stock REF-FB-083 Hook blade with U shapeCutting length: 10 mmSold individually

Reference: CS-RC14

Handable rolling Tool-box

Toolbox on wheels Size: L:62 x W:30 x H:32 cm + 10cm in height with wheels 4 drawers of 22 x 20cm

Reference: EGK150

Pneumatic knife: EQUALIZER ® Ninja GT Deluxe

The Ninja™ GT Deluxe is the improved and reinforced version of the famous Ninja™ pneumatic knife. Designed for the most demanding cold cutting applications, it features two ball bearings, a more powerful motor and an exhaust silencer that redirects air away from the vehicle for optimal working comfort. Exceptional performance and versatility: Optimized...

Reference: CAISSE-N436

Storage Case - 2ème VIE - N436

In very good condition There are only a few minor cosmetic flaws—only 1 item available 2nde VIE warranty: 6 months Storage case Dimensions: 310MM x 170 x 135H

Reference: ZAW-095

Arm wiper puller tool

Arm wiper puller tool

Reference: FB121

Cutting blade, straight - 26mm

Cutting blade, straightCutting length: 26 mmSold individually

Reference: SD-21

Braided wire - ø 0,80 mm - 22.5M

Braided wire21 ml REPAREGLASSBraided wire The braided wire is made of three stainless steel resistant wires that are braided to one strand. The wire is anodized (with a traditional gold colour). It has a 0.80mm diameter.

Reference: LAME-DECOUPE-NINJA

Cold cutting blade: Equalizer Ninja

Specially designed for the Equalizer® Ninja pneumatic knife, these cold cutting blades offer optimal precision and remarkable efficiency, suitable for use on all types of windshields. Their design absorbs vibrations while ensuring a clean and fast cut, even in the most difficult-to-reach areas.

Reference: CS-RC

TOOL-BOX WITHOUT ROLLING

Reference: DESTOCK-FRE-080-P

Retention device: metal strip and trim caps

To prevent the corners of hubcaps from sticking out, they are often attached with adhesive tape. However, this method carries risks: adhesives can react chemically with the vehicle's paintwork, causing damage. The ideal solution? Our retaining tool, specially designed to secure hubcaps without compromising paint quality. Advantages : Optimum protection:...

Reference: PILE-RAPTORX4

Rechargeable batteries for RAPTOR Kit - Set of 4

Rechargeable batteries for RAPTOR kit - Warning note that these batteries are compatible with our RAPTOR kits with a serial number prior to R0005372. If in doubt, please contact us. Sold in packs of 4 For information: 4 batteries are required for the RAPTOR device.

Reference: CROR-L

Brand: REPAREGLASS

Ball-tipped hook, with long shaft

Ball-tipped hook, with long shaft- 280 x 35 x 35 mm- 160 g

Reference: FB209

Hook blade with L shape - 38 mm

profondeur de coupe : 38 mmvendue à l'unité

Reference: ZK45

ZipKnife™ cold knife

The ZIPKNIFE™ compact cold knife is specially designed for precise cutting in narrow and hard-to-reach areas. Its small size and ergonomic grip provide excellent control for efficient and safe working. Ideal for delicate work, it is designed for use exclusively with our cold knife blades. Sold without blade.