Universal Knife Blade Dispenser - with blades

Reference: CG-200NEW-N517

Pneumatic knife with original blade - Second-hand - N517

General condition: All systems go, in good condition Sold without blade; cosmetic defects shown in the photos are present 1 Only item available 2nde VIE Warranty: 6 months Designed to remove windshields quickly and easily, this pneumatic knife cuts through adhesive using a system of powerful oscillating blades. It offers excellent speed control thanks to...

Reference: 848031AIGUILLE

Needle to guide the wire upper the metal tabs from the car

Needle  to guide the wire upper the metal tabs from the car .

Reference: FB111

Hook blade with U shape - 95 mm

profondeur de coupe : 95 mmvendue à l' unité

Reference: CS-696

Clipsaver door upholstery remover

EQUALIZER® ClipSaver door upholstery remover The front of the tool is tapered so it will fit easily under a clip. Spread the jaws slightly so they will go under and around the clip. Then, close the jaws and it removes the clip without damaging it. Great for the removal of door panels. - 230 x 76 x 51 mm - 205 g

Reference: WK5

LONG FLAT BLADE 130MM

Long, flat blade 130mm

Reference: Z7RV

New Paint Protection Reverse Bend Blade 19mm « ULTRAWIZ »

Nylon coating protects exposed paint from accidental blade contactIdeal for exposed glass with underside molding or encapsulationOffers the control a technician needs to cut awayfrom the glass or moldingAvailable in 3 lengths : 19 mm – 25 mm – 38 mm

Reference: FB083-DESTOCK

Hook blade with U shape - 10mm

Please note: Only 5 units in stock REF-FB-083 Hook blade with U shapeCutting length: 10 mmSold individually

Reference: WK4ZS

Serrated, deep offset, multi-purpose BTB blade, 140mm

Serrated, deep offset, multi-purpose BTB blade, 140mm

Reference: NMT-448

Mechanical pick up

Mechanical pick up The use of telescopic magnet could be sometimes impossible to use because of non ferrous items. It is times like these when you need our Mechanical Pick-Up. It is designed with steel fingers that are spring-loaded that will grip an item up to 2,5 cm in diameter.

Reference: LAC-405-N503

Suction Cup Anchor for Holding a Cutting Rope - Second Life - N503

In fair condition Overall condition: No issues Cosmetic defects shown in the photos are present — Only one item available 2nde VIE Warranty: 6 months Suction cup for holding the windscreen gasket cutting cord

Reference: CAISSE-N396

Storage case L: 44 cm x H: 17 cm x W: 19 cm - 2nd LIFE - N396

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Storage case Length: 44cm - Width: 17cm - Height: 19cm

Reference: FSB103

Saw disk ø 80 mm

Disque de scie ø 80 mm vendu à l'unité

Reference: CTD-607

Recessed Cowling Clip Remover

Recessed Cowling Clip RemoverSome self-locking cowling clips are recessed down into the cowling. They are not the type that look like a Phillips or TORX®screw, but are the type that can be removed with a tool like the CGE-148. The only problem is the TPE657 will not reach downinto the recessed area and go under the head of the clip. If you manage to force...

Reference: FSC1.7B2

FEIN battery-powered knife - without blade, with battery

Discover a powerful, precise and completely autonomous solution for your automotive work. This FEIN cordless knife is designed to meet the highest demands of glass professionals, combining mobility, performance and reliability. Technical specifications: Battery voltage: 18 V Battery capacity: 5 Ah Oscillations: 10,000 - 19,500 rpm Amplitude: 2 x 1.7°...

Reference: H1

Long Olfa®

Olfa® knifeKnife with a snap-off blade, 25 mm and 0,7 mm wide.The blade can be outside its housing up to a length of 10 cm and a thumb locking screw allows you to lock the blade in any position.Back of the knife features a rubber grip that lets the knife rest comfortably in your hand and keeps it from slipping.- 172 x 34 x 25 mm - 155 g

Reference: CAISSE-N399

Storage case L: 44 cm x H: 17 cm x W: 19 cm - 2nd LIFE - N399

In very good condition Only a few minor cosmetic flaws - 9 units available 2nd LIFE warranty: 6 months Storage case Length: 44cm - Width: 17cm - Height: 19cm

Reference: AEB405-N192

Pneumatic knife: Equalizer® EXCALIBUR® DELUXE - 2nd LIFE - N192

Kit in good condition. The case may be incomplete (blades). Only cosmetic defects shown in the photos are present. Only one item available. 2nd LIFE warranty: 6 months Recommended for cutting the lower parts of the windscreen, rear windows and quarter windows. Cutting the interior of the vehicle. Compact and lighter, it is even easier to handle,...

Reference: WK24

Long, deep offset, BTB blade, 240mm

Long, deep offset, BTB blade, 240mm

Reference: WFA-450

Windshield wiper arm removal tool Universal

REF. WFA-450Universal Wiper Puller. Sometimes you need alarge thick puller arm to remove a windshield wiperand sometimes you need a small thin arm. This is thereason our wiper puller has interchangable arms. Setthe wiper puller arms on the horozontal slide, slidethem in until they touch the side of the windshieldwiper, snug the wing nut to hold them in...

Reference: AP-6205

Tool declipsor

Tool declipsor SPRINGERTOOL The distinct precision curvature of the Springer Clip Removal Tool provides a varaible load distribution, safely moving the load point along the tool as more leverage is applied The tapered tip allows entry under closely fitted parts and the rounded edges avoid damage to the trim or vehicle. No matter a body shop you will be...

Reference: DST-58

Curved wire threader 58 mm (package at 3 pièces)

Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...

Reference: LAME-DECOUPE-NINJA

Cold cutting blade: Equalizer Ninja

Specially designed for the Equalizer® Ninja pneumatic knife, these cold cutting blades offer optimal precision and remarkable efficiency, suitable for use on all types of windshields. Their design absorbs vibrations while ensuring a clean and fast cut, even in the most difficult-to-reach areas.

Reference: ZAW-025

Arm wiper puller tool

Arm wiper puller tool

Reference: BAT18-FSC1.7

18V - 5A battery for FEIN battery knife

Maximize the autonomy and power of your FEIN battery knife with this high-capacity Li-ion battery. Designed for demanding professionals, it ensures reliable performance and extended runtime for your intensive work. Key features: 18V voltage: Optimum power to meet the needs of FEIN tools. 5Ah capacity: offering extended autonomy, ideal for extended work...

Reference: FB076

FEIN cutting blade, straight 35 mm (56 mm 12 g)

cutting length: 24mm 17g Sold individually

Reference: H600

Cutter 9 mm

9 mm cutter - supplied without bladeCompatible blades: Ref.AB-50S

Reference: KFS-300

Scraper kit in plastic case

Reference: BOITE-TRANSP-N448

Clear Storage Box - N448 - 2ND vie

In very good condition Only 1 available 2nde VIE warranty: 6 months Storage case for all types of small parts Dimensions: 145 mm x 270 mm x 35 mm (H)

Reference: AIG-125

T-handles wire threader

Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.- 120 x 26 x 10 mm - 20 g

Reference: Z7

Cold knife blade coated, extra fine 19 mm

Cold knife blade coated, extra fine - Sold individually- Cutting length: 19 mm- 20gCARTON OF 10