• VBSA labellisé ECOVADIS

Tampon Feutre 100% Laine Blanche Pour Application Primer Et Degraissant Collage pare-brise France
  • Tampon Feutre 100% Laine Blanche Pour Application Primer Et Degraissant Collage pare-brise France
  • Tampon Feutre 100% Laine Blanche Pour Application Primer Et Degraissant Collage pare-brise France
  • Tampon Feutre 100% Laine Blanche Pour Application Primer Et Degraissant Collage pare-brise France

Tampon feutre 100% laine blanche pour application primer et dégraissant

TAMPON-FEUTRE-DESTOCK

Tampon feutre 100% laine blanche pour application primer et dégraissant

21.5 X 19 MM

S'il vous plait, Identifiez-vous à votre compte client pour afficher les tarifs.
Quantité: A partir de ....

Produits associés

Flacon applicateur pour primer, dégraissant ....
Flacon applicateur pour primer, dégraissant ....
0,00 €
Bouchon applicateur pour application dégraissant et primer
Bouchon applicateur pour application dégraissant et primer
0,00 €
Détails du produit
TAMPON-FEUTRE-DESTOCK
Vous pourriez également aimer

Reference: EHL-652

Gants latex légèrement poudrés

Gants latex légèrement poudrés Ces gants sont très pratiques car vous pouvez toucher le tranchant du verre sans contamination produite. Vendus par boîte de 100 pièces.A usage unique, non stérile

Reference: 501FC-310

Colle à pare brise polyuréthane 501FC-HM-LC-HV - ULTRA RAPIDE - Application traditionnelle - 30min Airbags !

POUR VOTRE SÉCURITÉ Nos colles pare-brise ont été testées et validées TUV (crash tests !) + OEM (utilisé par les constructeurs en 1ère monte). Norme FMVSS208/212. Produits sur le marché depuis plus de 20 ans.  Colle polyuréthane mono-composante à séchage ULTRA RAPIDE qui, par réaction avec ­l’humidité de l’air, se transforme en un joint de colle...

Reference: 520-30

Dégraissant 520 spécial préparation collage pare-brise

Dégraissant à base de solvant avec des propriétés favorisant l'adhésion pour le pré-traitement des pare-brises automobiles directement collés. Application en simple couche essuyage. Différents conditionnements possibles: Flacon de 30ml - Ref.530-30 - Vendu à l'unité ou carton de 25 Flacon de 250 ml - Ref.530-250 - Vendu à l'unité ou carton de 12 Flacon...

Reference: 530-30

Primer verre/métal 530 spécial préparation collage pare-brise

Notre Primaire verre/métal est un primer noir de séchage physique et chimique à base de solvant, conçu pour préparer le pare-brise et la baie de pare-brise nue avant collage. Le primer 530 favorise l'adhésion du polyuréthane et protège des rayons UV. Possède également des propriétés anti-corrosion préventives. En cas de trace de rouille sur la...

Reference: 550-250

Multiprimer 550 noir application sur métal galvanisé, fibre de verre, etc..

Spécialement élaboré pour l'application sur feuille de métal galvanisé, aluminium, acier, fibres de verre renforcées, polyester, etc... (Ex voiturette, etc..)Favorise l'adhésion du polyuréthane au support, empêche la détérioration du joint causé par les rayons UV, empêche la rouille, et sa conductivité est faible. vendu en flacon de 250 ml ou carton de 12

Reference: CC-1058

GANTS NITRILE élastiques et extensibles (NON POUDRÉS)

Matière première: Caoutchouc nitrile. Ne contient pas de latex caoutchouté naturel. Les composants utilisés pour fabriquer les gants peuvent provoquer des réactions allergiques à certains utilisateurs. Bonne qualité de gants nitriles fournissant une excellente barrière biologique. A stocker dans un endroit froid, sec, éviter des chaleurs excessives (...

Reference: PB-1349

Marque: REPAREGLASS

Lingettes pré -imprégnées décontaminant silicone pour pare-brise et mains

Nos lingettes pré-imprégnées sont très efficaces pour le nettoyage et la décontamination de la colle, graisse, silicone, etc.Elles sont tout particulièrement appropriées pour nettoyer les mains de polyuréthane, de graisses et autres souillures, tout en leur donnant un agréable parfum de citronnelle.Une fois vos mains propres, la lingette dispose d’encore...

Reference: BOB-CHAM

Bobine d'essuyage ouaté (2 rouleaux de 1000 feuilles)

  LOT DE 2 ROULEAUX DE 1000 FEUILLES certifié PEFC Apte au contact alimentaire Consommation maîtrisée grâce à la distribution feuille par feuille. Dimensions feuille : 340 x 257 mm - perforées. Longueur du rouleau : 350 m Diamètre du rouleau : 30 cm Grammage : 2 x 19g/m² Lot de deux rouleau de 1000 feuilles chacun, soit 2000 feuilles Vendus par lot de 2...

Reference: BLACKNIT

Gants nitrile Noir de protection (non poudrés) épais spécial réparation divers

Offrez à vos mains une protection optimale avec nos gants en nitrile noir non poudrés, conçus pour une utilisation professionnelle et polyvalente. Recommandations d’utilisation : Stockage dans un endroit froid et sec, à l’abri de la chaleur excessive (température maximale : 40 °C). Boîte ouverte à protéger des rayons UV et de l’exposition directe au...

30 other products in the same category:

Reference: 2105

Glue remover and before painting cleaner 5L for bodywork cleaning

Warning: Do not use as an activator or windshield cleaner. CKW-free silicone remover - free from chlorine derivatives. Fast-drying surface cleaner that completely removes silicone, grease and oil before painting vehicles. Before painting, it easily removes sanding dust, mastics, undercoats and films of oil and grease (which form silicone), to provide a...

Reference: GL-1153

Windshield bonding cartridge heater and cooler -12V/24V and 230V

TEMPERATURE CONTROL DEVICE FOR PB glue cartridges and cans in 12 or 24 V DC and 230 V AC keeps cartridges at the right temperature, cigarette lighter connection. Input voltage (AC), [V]: 220-240 Input voltage (DC), [V]: 12/24 - Cools down to 27 ºC below ambient temperature and heats up to +65 ºC - Active battery protection prevents deep discharge of the...

Reference: 2130

Glue remover and before painting cleaner 25L for bodywork cleaning

Warning: Do not use as an activator or windshield cleaner. CKW-free silicone remover - free from chlorine derivatives. Fast-drying surface cleaner that completely removes silicone, grease and oil before painting vehicles. Before painting, it easily removes sanding dust, mastics, undercoats and films of oil and grease (which form silicone), to provide a...

Reference: BOB-CHAM

Cleaning paper made of cellulose wadding (2 rolls of 1000 sheets)

  Wadding cleaning paper PEFC certification, PEFC Label.     Suitable for food contact     Controlled consumption thanks to sheet-by-sheet distribution.     Sheet dimensions: 340 x 257 mm - perforated.     Roll length: 350 m     Diameter of the roll: 30 cm     Grammage: 2 x 19g/m².     Pack of two rolls of 1000 sheets = 2000 sheets Sold in sets of 2...

Reference: DEC-50

Foam sponge for decontaminating silicone before windshield bonding - Bag of 50

This decontamination process is imperative if the windshield bonding is to last. The thermoformed packaging produces a chemical reaction on your windscreen, making it difficult to bond without a decontamination step before bonding. Thermoforming is carried out under a source of heat, which causes an excess of silicone on the surface, preventing the...

Reference: MBS

SADURR® Individual preservative for used cartridges

Our MBS cartridge preservative will enable you to store and preserve your opened windscreen glue, sealant or silicone cartridges in a hermetically sealed, dry environment that avoids any chemical fumes. How do I use it?  Nothing could be simpler:  - Insert the cartridge - Then place a filter containing moisture-absorbing silica gel beads on top.  - Close...

Reference: VNT-306

EQUALIZER® cutting nozzle tools for windshield bonding or other applications

Equalizer® VNT306 nozzle clamp The nozzle clamp makes it fast- curing and easy to make an exact V-notch in the nozzle tip of the polyurethane cartridge. This is important for efficient work! Because a bonding bead has to be applied with care. Simply cut the nozzle tip to the required opening width, insert the pliers into the opening as far as they will go...

Reference: LING-80

Cleaning wipes for putty, glue, resin...

LING-80 is ideal for bodywork, carpentry and public works on all surfaces.LING-80 is a wipe specially developed for professionals to remove traces and deposits of :- windshield bonding putty- aluminum or PVC joinery assembly glue- bitumen stainsLING-80 is gentle on hands. It is impregnated with a plant-based product.

Reference: CHAMB

Microfiber for glass and polishing 40 x 40 cm

Ideal for cleaning applications, high-tech and virtually indestructible. Replaces chamois and polishing cloths, machine-washable without softener. Use for car windows, car polishing, polish and polish remover.

Reference: 9505140

Cutting pliers for universal joints

The KNIPEX rubber and universal joint cutter is a high-quality professional tool designed to cut various types of rubber joints easily and precisely. Its sturdy, ergonomic design makes for a comfortable grip and high precision when cutting. Ideal for bodybuilders, garages and other professionals who need to cut gaskets cleanly, these pliers are suitable...

Reference: GRAISSE-JOINT

Rubber gasket grease - 1kg

Optimize the maintenance and durability of rubber seals with our Rubber Seal Grease - 1kg, a product specially designed for bodywork professionals and garages. Applications: Ideal for maintaining door, trunk and windshield seals. Protects seals subjected to extreme thermal variations, UV and chemical exposure. Reduces squeaking and improves joint...

Reference: MICRO-CARBON

Carbon fiber microfiber - glass cleaning - pack of 5

Discover our carbon fiber microfiber, specially designed for impeccable window cleaning without leaving streaks or residues. Thanks to advanced carbon fiber technology, this ultra-soft microfiber easily picks up dust, dirt and fingerprints, while eliminating traces of water and cleaning products. Washable and reusable, it offers long-lasting performance...

Reference: KZS-163

KZS-163 cutting nozzle tools for windshield bonding or other applications

Cutting nozzle tool for windshield bonding and other applications. The nozzle clamp makes it quick and easy to make an exact V-shaped cut in the nozzle tip of the polyurethane cartridge. This is important for good work! Because a bonding line must be applied with precision. Simply cut the tip of the nozzle to the required opening width.