VBSA awarded ECOVADIS label
Banner
FOR VOUR SAFETY
Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment).
Standard FMVSS208/212. Products on the market for over 20 years.
SAVETY DRIVE-AWAY TIME 501K: Curing time (23°-50%) - Airbag: 1 hour - Airbags: 2 hours
If you regularly change windshield bonding, choose our BIG KIT for better cost- efficiency.
Our 501K windshield bonding BIG kit contains :
- 12 Windshield bonding Saussage 400ml 501FC
- 6 Saussage nozzles
- 1 Primer 250ml
- 1 Cleaner 250ml
- 12 felt applicators
A BIG-KIT palet contains 72 boxes.
Reference: 769
Effectively remove traces of oil, insects and dust with 769 foam-based glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...
Reference: 768
Effectively remove traces of oil, insects and dust with the foam-based 768 glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...
Reference: GL-1153
TEMPERATURE CONTROL DEVICE FOR PB glue cartridges and cans in 12 or 24 V DC and 230 V AC keeps cartridges at the right temperature, cigarette lighter connection. Input voltage (AC), [V]: 220-240 Input voltage (DC), [V]: 12/24 - Cools down to 27 ºC below ambient temperature and heats up to +65 ºC - Active battery protection prevents deep discharge of the...
Reference: 520-30
Solvent-based cleaner with adhesion-activating properties for pre-treating direct bonded pro windshields, Single-application wipe-off. Various packaging options: 30ml bottle - Ref.520-30 - Sold individually or in boxes of 25 250 ml bottle - Ref.520-250 - Sold individually or in boxes of 12 1L bottle - Ref.520-1 - Sold individually or in boxes of 12...
Reference: 530-30
Our glass/metal primer is a black, the curing of which is both physical and chemical.content solvent to prepare the windshield and the pinchweld befor the bonding. Primer 530 promotes polyurethane adhesion and protects against UV rays. It also has preventive anti-corrosion properties. If there are traces of rust on the bodywork, it is imperative to use...
Reference: 501K-310
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. FAST-drying, one-component polyurethane bonding agent that reacts with humidity in the air to form a strong and elastic seal. The adhesive is used...
Reference: KIT501FC-HM-LC-HV-400
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. SAVETY DRIVE-AWAY TIME 501FC-HM-LC-HV: Curing time (23°-50%) Airbags: 30 minutes Our 501FC windshield bonding kit contains : - 1x 310 ml cartridge...
Reference: B12
Not cut nozzles x12 to size for 400 or 600ml saussage windshield bonding Set of 12 nozzles
Reference: 6200
Ideal for protection and fixing, our reinforced black fiber-reinforced adhesive tape is specially designed to protect sensitive surfaces such as mudguards, hood corners or roofs when cutting a windshield. Ultra-resistant, it is also very effective for holding freshly installed windows in place, thus preventing them from lowering after installation. Thanks...
Reference: PB-1349
Clean and decontaminate effectively with our pre-impregnated wipes specially designed to remove glue, grease, silicone and other impurities. Features: Highly effective: Removes polyurethane, grease and dirt Multi-purpose: Cleans hands, tools, workbenches and toolboxes Silicone decontamination: Ideal for preparing a windshield before installation Pleasant...
Reference: KB-1228
Pack of 50 rubber blocks for perfect positioning when bonding the windshield. Position the blocks before bonding your windshield once you've finished preparing the bay. L:2.5 cm x W:1.5cm x E:0.9cm
Reference: V54
Designed for extruding standard 310 ml cartridges and 400 ml cartridges, it ensures smooth, controlled and effortless application. Main features: Compatible with 310 ml cartridges and 400 ml cartridges Supplied complete: 3.0 Ah Li-ion battery, fast charger (1 hour), carrying case Weight with battery: 2.75 kg Speed variator: precise adjustment on the...
Reference: BD12
Pre-cut nozzles for 400 or 600ml windshield bonding saussages. Pack of 12 pre-cut nozzles
Reference: 04200202
Adjustable windshield trestle with rubber plates with tool storage bag115 cm x 182 cm x 88 cmLoad capacity: 180 kg
Reference: DEC-50
This decontamination process is imperative if the windshield bonding is to last. The thermoformed packaging produces a chemical reaction on your windscreen, making it difficult to bond without a decontamination step before bonding. Thermoforming is carried out under a source of heat, which causes an excess of silicone on the surface, preventing the...
Reference: BIGKIT501FC-400
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. SAVETY DRIVE-AWAY TIME 501FC-HM-LC-HV: Curing time (23°-50%) Airbags: 30 minutes If you regularly change windshield bonding, choose our BIG KIT for...
Reference: AP-100
Felt Applicators must be used to apply the primer or activating cleaner correctly to the Windshield or Bodyshop. Box of 100. Length 105 mm
Reference: MICRO-CARBON
Optimize your cleaning with our carbon fiber microfiber, designed for a flawless result on windows without leaving streaks or residue. Thanks to advanced carbon fiber technology, this ultra-soft microfiber effectively captures dust, dirt and fingerprints, while eliminating traces of water and cleaning products. Washable and reusable, it guarantees...
Reference: PACK25-REGCAPLUIE
Purchase in quantity ..... That's - PACKAGING And + SAVINGS!
Reference: LA-200
Steel wool specially designed to remove difficult marks from all types of glass (e.g. paint mist, whitish solvents, glue residues, etc.). DO NOT USE ON VEHICLE MIRRORS (rear-view mirrors) Can be used to improve adhesion to screen printing. Use dry. Blow well after use to remove metal dust. FOR WINDOWS : - removes light scratches - cleans dirt without...
Reference: ASP-20-PACK
Battery-powered vacuum cleaner supplied with 2 batteries and 1 charger The ASP-20-PACK battery-powered vacuum cleaner is the ideal tool for small cleaning jobs, offering optimal power and a long battery life. With its high-power two-speed motor (130W and 200W), it is perfectly suited to the needs of professionals and individuals. Designed to vacuum up...
Reference: CD12
Pre-cut nozzles x12 for windshield bonding cartridges 501K, 501FC, F1K, F1FC in 310ml Pack of 12 pre-cut cartridge nozzles
Reference: 768
Effectively remove traces of oil, insects and dust with the foam-based 768 glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...
Reference: KZS-163
Cutting nozzle tool for windshield bonding and other applications. The nozzle clamp makes it quick and easy to make an exact V-shaped cut in the nozzle tip of the polyurethane cartridge. This is important for good work! Because a bonding line must be applied with precision. Simply cut the tip of the nozzle to the required opening width.
Reference: KB-1228
Pack of 50 rubber blocks for perfect positioning when bonding the windshield. Position the blocks before bonding your windshield once you've finished preparing the bay. L:2.5 cm x W:1.5cm x E:0.9cm
Reference: GL-1153
TEMPERATURE CONTROL DEVICE FOR PB glue cartridges and cans in 12 or 24 V DC and 230 V AC keeps cartridges at the right temperature, cigarette lighter connection. Input voltage (AC), [V]: 220-240 Input voltage (DC), [V]: 12/24 - Cools down to 27 ºC below ambient temperature and heats up to +65 ºC - Active battery protection prevents deep discharge of the...
Reference: F1K
PRIMERLESS windshield bonding. FAST PRIMERLESS application is different from the traditional application, it consists of using our F1 activating cleaner followed by the "F1K" polyurethane bonding agent compared to the traditional application composed of 3 products (degreaser, primer and bonding). VEHICLE CURING TIME Curing time (23°-50%) Airbag: 1 hour -...
Reference: PLA0331-DESTOCK
Applicator cap for application of cleaner and primer
Reference: ATP5
Transparent adhesive tape for repositioning your Toll PASS or Navigation device after replacement of the windshield. Cut to the required length. Roll size. Width: 12.7 mm - Length 5M Supplied without fixing and without PASS
Reference: POSTER-CPB
Windshield bonding process poster ( including technical different steps ) for a proper use Available for export only with a product order. No delivery possible on its own
Reference: 9505140
The KNIPEX rubber and universal joint cutter is a high-quality professional tool designed to cut various types of rubber joints easily and precisely. Its sturdy, ergonomic design makes for a comfortable grip and high precision when cutting. Ideal for bodybuilders, garages and other professionals who need to cut gaskets cleanly, these pliers are suitable...
Reference: MHP139
The storage case for adaptable seals or windshield adhesive is designed to ensure optimal storage conditions for consumables in the workshop or during repairs. Equipped with a heating system up to 38°C and a 12V connection, it keeps products at the ideal temperature for effective use, even in cold environments. Practical and functional, this case can hold...
Reference: 601M
Effectively protect vehicle interiors with this special glass breakage film. Key features: Optimum protection: Prevents water and dust from entering the vehicle before replacing broken or damaged glass. Special glass breakage film: Ideal for maintaining temporary protection while ensuring the safety of occupants and interior equipment. Lightly adhesive:...
Reference: JGM-MBS
Large seal for SADURR® half-cartridge preservative Sold individually
Reference: 530-30
Our glass/metal primer is a black, the curing of which is both physical and chemical.content solvent to prepare the windshield and the pinchweld befor the bonding. Primer 530 promotes polyurethane adhesion and protects against UV rays. It also has preventive anti-corrosion properties. If there are traces of rust on the bodywork, it is imperative to use...
Reference: BOB-FIBRE
Ecological wiping spool 100% recycled product Milk carton ECOLOGICAL WIPING SPOOL MADE OF CELLULOSE FIBRES PACK OF 2 ROLLS OF 1000 SHEETS Advantages: No discoloration No delamination or linting More absorbent than chamois rolls Raw material: cellulose fibre Sheet size: 220x300mm Roll length: 300m Diameter: 28cm Grammage: 18.5 ±1g Sold in sets...
Reference: C12-DESTOCK
No pre-cut nozzles x12 for windshield bonding cartridges 501K, 501FC, F1K, F1FC in 310ml Pack of 12 no pre-cut cartridge nozzles
Reference: KIT501K-310
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. SAVETY DRIVE-AWAY TIME 501K: Curing time (23°-50%) - Airbag: 1 hour - Airbags: 2 hours Our 501K windshield bonding kit contains : - 1x 310 ml...
Reference: 6200
Ideal for protection and fixing, our reinforced black fiber-reinforced adhesive tape is specially designed to protect sensitive surfaces such as mudguards, hood corners or roofs when cutting a windshield. Ultra-resistant, it is also very effective for holding freshly installed windows in place, thus preventing them from lowering after installation. Thanks...
Reference: PLA0334-DESTOCK
Plastic bottle for primer, cleaner, etc…
Reference: 535
Clear activating cleaner for 505 HM MS-POLYMER windshield bonding. Only for use with 505 HM - MS POLYMER bonding. Sold in 30ml bottles or box of 12.
Reference: DEG-ADA
Universal cleaner for alcohol-free surface treatment. For use in the decontamination process when applying windshield or other bonding. Can also be used as a solvent for applications of sound deadening products. Sold individually in 1L bottle or in box of 12.
Reference: AP-100
Felt Applicators must be used to apply the primer or activating cleaner correctly to the Windshield or Bodyshop. Box of 100. Length 105 mm
Reference: 769
Effectively remove traces of oil, insects and dust with 769 foam-based glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...
Reference: DEC-50
This decontamination process is imperative if the windshield bonding is to last. The thermoformed packaging produces a chemical reaction on your windscreen, making it difficult to bond without a decontamination step before bonding. Thermoforming is carried out under a source of heat, which causes an excess of silicone on the surface, preventing the...
Reference: 2105
Warning: Do not use as an activator or windshield cleaner. CKW-free silicone remover - free from chlorine derivatives. Fast-drying surface cleaner that completely removes silicone, grease and oil before painting vehicles. Before painting, it easily removes sanding dust, mastics, undercoats and films of oil and grease (which form silicone), to provide a...
Reference: BIGKIT-ECO501FC400
BIG KIT "Economy" version FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. SAVETY DRIVE-AWAY TIME 501FC-HM-LC-HV: Curing time (23°-50%) Airbags: 30 minutes If you regularly change windshield...
Reference: 501FC-310
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. FAST-drying, one-component polyurethane bonding agent that reacts with humidity in the air to form a strong and elastic seal. The adhesive is...
Reference: JPM-MBS
Small seal for SADURR® half-used cartridge preservative Sold individually
Reference: B12
Not cut nozzles x12 to size for 400 or 600ml saussage windshield bonding Set of 12 nozzles
Reference: BIGKIT-ECO501K-400
BIG KIT "Economy" version FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. SAVETY DRIVE-AWAY TIME 501K: Curing time (23°-50%) - Airbag: 1 hour - Airbags: 2 hours If you regularly change...
FOR VOUR SAFETY
Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment).
Standard FMVSS208/212. Products on the market for over 20 years.
SAVETY DRIVE-AWAY TIME 501K: Curing time (23°-50%) - Airbag: 1 hour - Airbags: 2 hours
If you regularly change windshield bonding, choose our BIG KIT for better cost- efficiency.
Our 501K windshield bonding BIG kit contains :
- 12 Windshield bonding Saussage 400ml 501FC
- 6 Saussage nozzles
- 1 Primer 250ml
- 1 Cleaner 250ml
- 12 felt applicators
A BIG-KIT palet contains 72 boxes.
