Adjustable windshield trestle with rubber plates and with tool storage bag

Reference: FZS-128

Large PVC hood protection covered with foam.

HOOD PROTECTION - 1400 x 1840 mm Several sizes available: FENDER PROTECTION: Suitable for fender protection - 1400 x 800 mm FRONT PROTECTION: Suitable for front panel protection - 1900 x 700 mm CUSTOM DESIGN: Contact us Can also be made to measure on request for glazing, lorries, buses, underground railways, public works, etc.

Reference: VB4000102

Black windshield wedge

Sold in packs of 10

Reference: 8PZ010624-081

Cible CSC TOOL MOBILE - TOYOTA LEXUS 1-08

Reference: TKS-100

Trapezoid blades

Trapezoid blades. In a pratical dispenser. Our replacement blades for utility knives are 0,6 mm thick, so they are very sturdy. These blades are in a safety dispenser with a suspension hook so as to avoid any risk of injury. You take new blades by sliding them out from the above side of the dispenser while youdispose of the worn out blades by sliding them...

Reference: VP-230SPECIALE-N336

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N336

Average condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...

Reference: BOB-1.5-ROLL-OUT

Round wire in a spool REPAREGLASS - ø 0,80 mm, 1500 ml

Round wire in a spool The round profile and the small diameter make this wire a real problem solver for todays cars with narrow gaps between glass and body. It has the same high tensile strength than the VKD-44but offers at the same time as much lower risk to damage interior linings and dashboards.679 Newtonø 0,80 mm, 1500 ml

Reference: PRP21-OCCASION

OCCASION Piston automatique - Equalizer Powerpump

OCCASION AUTOMATIC PISTON - Used for our customer demonstrations. Only one piston available Replaces the manual plunger, automatically sucks in the suction cup when the button is pressed, can be used manually if the battery is flat. 5-hour autonomy Supplied with USB-C charging cable Fits ULTRAPOSE1, ULTRAPOSE3, VP-230 and VP-230SPECIALE

Reference: DESTOCK-GAVI

Full finger anti – Vibration gloves

Anti-vibration glovesThese gloves limit the effects of vibrations caused by the use of cutting knives (pneumatic and power tools in general).They reduce the effects of shock, vibration and impact. Comfortable to wear thanks to its seamless knitted shell. Good breathability. Excellent grip. REF-GAVI-L - Size LREF-GAVI-XL - Size XL

Reference: STA668

Protection for trestles

PROTECTION FOR TRESTLESWho never thinked about replace its trestle foam ?We are offering our new neoprene fabric velcrostripwith sharkskin, made of 5 mm, with 5 cm wideNo need to remove the old covers, just wrap andsecure with the Velcro.REF. STA-668Sold individually ( 1 strip)Stand not include .Order 2 x STA-668 to protect one stand.Stand not include.

Reference: RT-500

Wheel step ladder

Wheel Step – Easy Access to Elevated Areas on Any Vehicle Product Description This foldable wheel step is the ideal tool for comfortably working on elevated parts of a vehicle, such as the windshield, roof, or trunk. Thanks to its clever design, it fits most car wheels and provides an elevated work platform between 30 and 50 cm, depending on the wheel...

Reference: VB6101001

Fastener for windshield wiper motor cover

Sold in packs of 10

Reference: CGE-148

Clip removal tool

Clip removal tool This tool is used to remove plastic clips on door linings. It fits easily down into the recessed area and then can slid under the head of the cowling clip. You then pull up on the center locking part and the clip can be removed. - 235 x 35 x 30 mm - 165 g

Reference: L110

Reel on wheels for electrostatic film - Marouflage paper, etc...

Simplify storage and use of your protective rolls with this reel on wheels. Key features: Versatile: This dispenser is designed to support a variety of rolls, such as electrostatic film, marouflage paper and other consumables, with rolls up to 1175 mm long. Adjustable, sliding “T” rod: Allows the roll to be locked at the desired height, offering...

Reference: OL30

Olfa®knife, with one snap-off blade of 9mm

Olfa® knife, with one snap-off blade of 9 mm.Standard knives with a wide 18 mm blade are generally too wide to accomplish fine jobs. With its retractable blade of 9 mm wide, this knife allows a fine cutting with one hand.- 130 x 16 x 10 mm - 36 g

Reference: JM5

Anti-overflow foam gasket - 5.5m

A must-have for precise, clean and professional windshield installation. This anti-spill foam gasket is specially designed to guarantee a flawless finish when installing windscreens. Its main function is to compensate for irregularities and prevent excessive glue overflow, ensuring a uniform and neat application. It also contributes to a perfect seal and...

Reference: FZS-128TIROIR

Protective felt for empty drawer: 58 x 40 cm

Reference: CHARG-FSC1.7

FEIN battery knife charger

Ensure fast, efficient recharging of your FEIN 18V batteries with this charger specially designed to meet the needs of professionals. Key features: Optimum compatibility: Compatible with FEIN 18V batteries RÉF. BAT18-FSC1.7 Fast charging: Reduces waiting time for continuous work without prolonged interruptions. Advanced charging technology: Protects your...

Reference: VP-230SPECIALE-N334

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N334

Average condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...

Reference: VB3104012

Side clip

Sold in packs of 10

Reference: VB72155

Door panel staples

Sold in packs of 10 Type: Composite molding fastener Color: White

Reference: FZS-6020

Static protection strip for rocker panels

Effectively protect vehicle underbodies during repair work with our protective tape specially designed for automotive professionals. This sturdy tape offers protection against scratches, bumps and scuffs, preserving the condition of the underbody during workshop work. Made from impact-resistant material, it is easy to apply and adheres perfectly to the...

Reference: AST-120

Telescopic magnet

Telescopic magnetWhen you work above all in the door or chassis frame of the vehicle, a screw may fall and it may be impossible to pick it up with your fingers. With this telescopic magnet, you no longer have this problem. The telescopic device is extendable from 12 (corresponding to the size of a ballpoint pen ) to 60 cm. The strong magnet is capable to...

Reference: SD-22

Braided wire in a spool - - ø 0,80 mm - 22ML

Braided wire in a spool REPAREGLASS ø 0.80 mm, length: 22 m, Wound on a plastic spool. 1083 NEWTON The wire to be cut is twisted according to our exact specifications from three strong stainless steel wires. The wire is anodised in a typical "gold" colour.

Reference: VB4000201

White windshield wedge

Sold in packs of 10

Reference: VB32305

Door panel staples

Sold in packs of 10 Type: Panel stop Color: White Material: Acetal - POM

Reference: BLACKNIT

Black protective nitrile gloves (powder-free), thick, special for various repairs

Give your hands optimum protection with our powder-free black nitrile gloves, designed for professional, all-purpose use. Recommendations for use : Store in a cool, dry place, away from excessive heat (maximum temperature: 40°C). Open tin to be protected from UV rays and direct exposure to sunlight. Packaging: Sold in boxes of 100 pieces, ideal for...

Reference: 8PZ010611-641

Cible CSC TOOL - TOYOTA-LEXUS 1-13

Reference: VP-230-N319

Piston Suction Cup Ø 230 mm – Lifting Capacity 380 kg - Second Life - N319

In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting power,...

Reference: CAISSE-N397

Storage case L: 44 cm x H: 17 cm x W: 19 cm - 2nd LIFE - N397

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Storage case Length: 44cm - Width: 17cm - Height: 19cm

Reference: PACK20-REGCAP-MAXI

Pack of 20 MAXI 12 ml gels for repairs to rain and light sensors

BUY + AND SAVE + Thanks to its reclosable format, the gel can be kept for future repairs, guaranteeing optimal use. Designed to ensure at least 60 repairs, this kit is ideal for professionals and workshops. Pack contents: - 20 x 12 ml REG-CAPLUIE-MAXI gels - 4 pushers for easy and precise application - 60 nozzles to guarantee a controlled flow without...