VBSA awarded ECOVADIS label
Banner
F1 cleaner activator can only be used with our F1FC and F1K Windshield Bonding.
Apply a single coat with a felt applicator, then wipe clean with a dry lint-free cloth or cleaning towel (BOB-FIBRE or BOB-CHAM).
Sold individually or in box of 12
This decontamination process is imperative if the windshield bonding is to last. The thermoformed packaging produces a chemical reaction on your windscreen, making it difficult to bond without a decontamination step before bonding. Thermoforming is carried out under a source of heat, which causes an excess of silicone on the surface, preventing the windshield bonding from adhering properly. Our sponges are designed to clean surfaces contaminated by silicone in the world of car window replacement. Clean the glass with our PB-1349 wipes, then apply the DEC-50 decontamination sponge to the glass to remove traces of silicone, repeat the operation several times if necessary, then clean with our 768 glass cleaner, then wipe with our micro-carbon. Size: 8cm x 2cm x 2cm |
Foam sponge for decontaminating silicone before windshield bonding - Bag of 50
€0.00 |
|
Effectively remove traces of oil, insects and dust with the foam-based 768 glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics:
|
Foam window / windshield cleaner 768 - Mosquito repellent
€0.00 |
|
Ideal for protection and fixing, our reinforced black fiber-reinforced adhesive tape is specially designed to protect sensitive surfaces such as mudguards, hood corners or roofs when cutting a windshield. Ultra-resistant, it is also very effective for holding freshly installed windows in place, thus preventing them from lowering after installation. Thanks to its fibrous and reinforced structure, this tape ensures optimal adhesion and long-lasting hold.. |
Reinforced black fibrous adhesive tape 50mm
€0.00 |
|
PRIMERLESS windshield bonding. FAST PRIMERLESS application is different from the traditional application, it consists of using our F1 activating cleaner followed by the "F1K" polyurethane bonding agent compared to the traditional application composed of 3 products (degreaser, primer and bonding). VEHICLE CURING TIME Curing time (23°-50%) Airbag: 1 hour - Airbags: 2 hours Several packaging options: OUR SAUSSAGE CARTONS ARE SUPPLIED WITH 6 PRE-CUT NOZZLES (REF-NOZZLE BD12) 400ml saussage: Ref.F1K-400 - Sold individually or in boxes of 12 Select your packaging below: |
F1K windshield bonding - FAST - Primerless (Application without primer)
€0.00 |
|
PRIMERLESS windshield bonding. ULTRA FAST PRIMERLESS application is different from the traditional application, it consists of using our F1 activating cleaner followed by the "F1fc" polyurethane bonding agent compared to the traditional application composed of 3 products (degreaser, primer and bonding). VEHICLE CURING TIME Curing time (23°-50%) Airbag: 30 minutes - Airbags: 1 hour Several packaging options: OUR SAUSSAGE CARTONS ARE SUPPLIED WITH 6 PRE-CUT NOZZLES (REF-NOZZLE BD12). 310ml cartridge: Ref.F1FC-310 - Sold individually or in boxes of 12 400ml saussage: Ref.F1FC-400 - Sold individually or in boxes of 12 Select your packaging below: |
F1FC windshield bonding - ULTRA-FAST - Primerless (Application without primer)
€0.00 |
|
Windshield bonding process poster ( including technical different steps ) for a proper use Available for export only with a product order. No delivery possible on its own |
Windshield bonding process poster
€0.00 |
Reference: HDS-480NEW
Adjustable windshield trestleREPAREGLASS- width multi-adjustable for different lengths and weights so as carry all sizes of windshields.- Very sturdy version, load capacity up to 250Kg.- Made of electroplated steel, diameter: 30 mm.- Resistant foam at the base of the trestle.- 105 cm x 95 cm x 110 cm6.700 kg
Reference: 768
Effectively remove traces of oil, insects and dust with the foam-based 768 glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...
Reference: DEG-ADA
Universal cleaner for alcohol-free surface treatment. For use in the decontamination process when applying windshield or other bonding. Can also be used as a solvent for applications of sound deadening products. Sold individually in 1L bottle or in box of 12.
Reference: 1336
Adhesive pads used by equipment manufacturers for interior rear-view mirrors. For interior mirrors Pack of 100 stickers.
Reference: 6200
Ideal for protection and fixing, our reinforced black fiber-reinforced adhesive tape is specially designed to protect sensitive surfaces such as mudguards, hood corners or roofs when cutting a windshield. Ultra-resistant, it is also very effective for holding freshly installed windows in place, thus preventing them from lowering after installation. Thanks...
Reference: PB-1349
Clean and decontaminate effectively with our pre-impregnated wipes specially designed to remove glue, grease, silicone and other impurities. Features: Highly effective: Removes polyurethane, grease and dirt Multi-purpose: Cleans hands, tools, workbenches and toolboxes Silicone decontamination: Ideal for preparing a windshield before installation Pleasant...
Reference: F1K
PRIMERLESS windshield bonding. FAST PRIMERLESS application is different from the traditional application, it consists of using our F1 activating cleaner followed by the "F1K" polyurethane bonding agent compared to the traditional application composed of 3 products (degreaser, primer and bonding). VEHICLE CURING TIME Curing time (23°-50%) Airbag: 1 hour -...
Reference: F1FC-310
PRIMERLESS windshield bonding. ULTRA FAST PRIMERLESS application is different from the traditional application, it consists of using our F1 activating cleaner followed by the "F1fc" polyurethane bonding agent compared to the traditional application composed of 3 products (degreaser, primer and bonding). VEHICLE CURING TIME Curing time (23°-50%) Airbag: 30...
Reference: KB-1228
Pack of 50 rubber blocks for perfect positioning when bonding the windshield. Position the blocks before bonding your windshield once you've finished preparing the bay. L:2.5 cm x W:1.5cm x E:0.9cm
Reference: AP100SPECIAL
Felt Applicators must be used to apply the primer or activating cleaner correctly to the Windshield or Bodyshop. Box of 100. Length 130 mm
Reference: POSTER-CPB
Windshield bonding process poster ( including technical different steps ) for a proper use Available for export only with a product order. No delivery possible on its own
Reference: BOB-CHAM
Wadding cleaning paper PEFC certification, PEFC Label. Suitable for food contact Controlled consumption thanks to sheet-by-sheet distribution. Sheet dimensions: 340 x 257 mm - perforated. Roll length: 350 m Diameter of the roll: 30 cm Grammage: 2 x 19g/m². Pack of two rolls of 1000 sheets = 2000 sheets Sold in sets of 2...
Reference: FZS-128
HOOD PROTECTION - 1400 x 1840 mm Several sizes available: FENDER PROTECTION: Suitable for fender protection - 1400 x 800 mm FRONT PROTECTION: Suitable for front panel protection - 1900 x 700 mm CUSTOM DESIGN: Contact us Can also be made to measure on request for glazing, lorries, buses, underground railways, public works, etc.
Reference: BOB-FIBRE
Ecological wiping spool 100% recycled product Milk carton ECOLOGICAL WIPING SPOOL MADE OF CELLULOSE FIBRES PACK OF 2 ROLLS OF 1000 SHEETS Advantages: No discoloration No delamination or linting More absorbent than chamois rolls Raw material: cellulose fibre Sheet size: 220x300mm Roll length: 300m Diameter: 28cm Grammage: 18.5 ±1g Sold in sets...
Reference: 04200202
Adjustable windshield trestle with rubber plates with tool storage bag115 cm x 182 cm x 88 cmLoad capacity: 180 kg
Reference: DEC-50
This decontamination process is imperative if the windshield bonding is to last. The thermoformed packaging produces a chemical reaction on your windscreen, making it difficult to bond without a decontamination step before bonding. Thermoforming is carried out under a source of heat, which causes an excess of silicone on the surface, preventing the...
Reference: AP-100
Felt Applicators must be used to apply the primer or activating cleaner correctly to the Windshield or Bodyshop. Box of 100. Length 105 mm
Reference: MICRO-CARBON
Optimize your cleaning with our carbon fiber microfiber, designed for a flawless result on windows without leaving streaks or residue. Thanks to advanced carbon fiber technology, this ultra-soft microfiber effectively captures dust, dirt and fingerprints, while eliminating traces of water and cleaning products. Washable and reusable, it guarantees...
Reference: LA-200
Steel wool specially designed to remove difficult marks from all types of glass (e.g. paint mist, whitish solvents, glue residues, etc.). DO NOT USE ON VEHICLE MIRRORS (rear-view mirrors) Can be used to improve adhesion to screen printing. Use dry. Blow well after use to remove metal dust. FOR WINDOWS : - removes light scratches - cleans dirt without...
Reference: POSTER-PRIMERLESS
Primerless windshield bonding poster (PRIMERLESS) detailing the various stages in the bonding process for automotive glass. Available for export only with a product order. No delivery possible on its own
Reference: 550-250
Specially developed for use on galvanized sheet metal, aluminium, steel, reinforced fibreglass, polyester, etc... (ex. cars without a driving licence, etc.) Facilitates adherence of the polyurethane to the substrate, prevents damage to the seal caused by UV rays, prevents rust, and has low conductivity. sold in 250 ml bottles or box of 12
Reference: Q-BOND-S
Adhesive, filling and reiforcing powders for repairingQ-BOND Standard kit Q-BOND is one of the finest products for repairing various types of breaks, cracks and other damages to wide range of items. It has received various awards for outstanding quality and superior performance. For more serious repairs there is the two-part system with unique reinforcing...
Reference: VNT-306
This cutter is specially designed to precisely cut the nozzle of polyurethane cartridges used for installing windshields. It quickly creates a perfectly even V-shaped notch, which is essential for applying a clean and uniform bead of adhesive. It is easy to use: first cut the end of the nozzle to the desired width, then insert the pliers into the opening...
Reference: BIGKIT501FC-400
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. SAVETY DRIVE-AWAY TIME 501FC-HM-LC-HV: Curing time (23°-50%) Airbags: 30 minutes If you regularly change windshield bonding, choose our BIG KIT for...
Reference: BOB-CHAM
Wadding cleaning paper PEFC certification, PEFC Label. Suitable for food contact Controlled consumption thanks to sheet-by-sheet distribution. Sheet dimensions: 340 x 257 mm - perforated. Roll length: 350 m Diameter of the roll: 30 cm Grammage: 2 x 19g/m². Pack of two rolls of 1000 sheets = 2000 sheets Sold in sets of 2...
Reference: MHP139
The storage case for adaptable seals or windshield adhesive is designed to ensure optimal storage conditions for consumables in the workshop or during repairs. Equipped with a heating system up to 38°C and a 12V connection, it keeps products at the ideal temperature for effective use, even in cold environments. Practical and functional, this case can hold...
Reference: 535
Clear activating cleaner for 505 HM MS-POLYMER windshield bonding. Only for use with 505 HM - MS POLYMER bonding. Sold in 30ml bottles or box of 12.
Reference: L480
LOCTITE 480 is a reinforced, fast- curing instant adhesive ideal for bonding metal to metal, rubber or magnets, particularly in humid environments. LOCTITE® 480 is an instant adhesive designed for bonding difficult-to-bond materials requiring uniform stress distribution and high tensile and/or shear strength. It is a rubber-reinforced adhesive offering...
Reference: 769
Effectively remove traces of oil, insects and dust with 769 foam-based glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...
Reference: BIGKIT-ECO501K-400
BIG KIT "Economy" version FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. SAVETY DRIVE-AWAY TIME 501K: Curing time (23°-50%) - Airbag: 1 hour - Airbags: 2 hours If you regularly change...
Reference: LA-200
Steel wool specially designed to remove difficult marks from all types of glass (e.g. paint mist, whitish solvents, glue residues, etc.). DO NOT USE ON VEHICLE MIRRORS (rear-view mirrors) Can be used to improve adhesion to screen printing. Use dry. Blow well after use to remove metal dust. FOR WINDOWS : - removes light scratches - cleans dirt without...
Reference: 520-30
Solvent-based cleaner with adhesion-activating properties for pre-treating direct bonded pro windshields, Single-application wipe-off. Various packaging options: 30ml bottle - Ref.520-30 - Sold individually or in boxes of 25 250 ml bottle - Ref.520-250 - Sold individually or in boxes of 12 1L bottle - Ref.520-1 - Sold individually or in boxes of 12...
Reference: GL-1153
TEMPERATURE CONTROL DEVICE FOR PB glue cartridges and cans in 12 or 24 V DC and 230 V AC keeps cartridges at the right temperature, cigarette lighter connection. Input voltage (AC), [V]: 220-240 Input voltage (DC), [V]: 12/24 - Cools down to 27 ºC below ambient temperature and heats up to +65 ºC - Active battery protection prevents deep discharge of the...
Reference: CHAMB
The microfiber for windows and polishing 40 x 40 cm is the ideal tool for high-precision cleaning applications. With its composition of 70% polyester and 30% polyamide, this high-tech microfiber offers exceptional performance for cleaning car windows and polishing automotive surfaces. It is an effective replacement for traditional chamois leathers and...
Reference: 3300
Easy to bond glass and metal together and on top of each other. Temperature resistant from -20°C to + 80°C, with a short access to 120°C.. Drying time: 3min Thixotropic Possibility to fill holes until 6mm. Vertical application possible, good chemical resistance, transparent bonding.
Reference: MICRO-CARBON
Optimize your cleaning with our carbon fiber microfiber, designed for a flawless result on windows without leaving streaks or residue. Thanks to advanced carbon fiber technology, this ultra-soft microfiber effectively captures dust, dirt and fingerprints, while eliminating traces of water and cleaning products. Washable and reusable, it guarantees...
Reference: 3320
Glass and mirror bonding adhesive (15 ml) with brush application of activator primer (15 ml). Bodywork repair - Bonding glass - Glass-to-metal bonding For fixing mirror bases, deflector locks and any glass/metal or metal/metal assembly. Advantages : Suitable for bonding rigid, close-fitting metal or ceramic assemblies The product polymerises in the...
Reference: KZS-163
Cutting nozzle tool for windshield bonding and other applications. The nozzle clamp makes it quick and easy to make an exact V-shaped cut in the nozzle tip of the polyurethane cartridge. This is important for good work! Because a bonding line must be applied with precision. Simply cut the tip of the nozzle to the required opening width.
Reference: S-120
Butyl mastic sealant is a flexible, non-polymerisable synthetic elastomer-based butyl mastic with a wide range of applications, providing a watertight seal between manhole covers. For bonding glass, motorhome skylights, louvres, doors, etc. Diameter: 9.5 mm Length: 4.5 m Colour: black Packaging: Rn roll
Reference: MBS
Our MBS cartridge preservative will enable you to store and preserve your opened windscreen glue, sealant or silicone cartridges in a hermetically sealed, dry environment that avoids any chemical fumes. How do I use it? Nothing could be simpler: - Insert the cartridge - Then place a filter containing moisture-absorbing silica gel beads on top. - Close...
Reference: FLEXIBLEPEN100
This 60 cm hose is the ideal tool for applying hollow-body aerosol products in hard-to-reach areas. Its length enables the product to be effectively sprayed inside closed cavities, ensuring optimum anti-corrosion protection. Features: - 60 cm length to reach inaccessible areas - Even product distribution in cavities - Compatible with hollow-body aerosols...
Reference: 2130
Warning: Do not use as an activator or windshield cleaner. CKW-free silicone remover - free from chlorine derivatives. Fast-drying surface cleaner that completely removes silicone, grease and oil before painting vehicles. Before painting, it easily removes sanding dust, mastics, undercoats and films of oil and grease (which form silicone), to provide a...
Reference: 501FC-310
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. FAST-drying, one-component polyurethane bonding agent that reacts with humidity in the air to form a strong and elastic seal. The adhesive is...
Reference: TOLE1
Vintage Decorative Plaque VBSA – Bonding – Limited Edition N°1 Bring a touch of authenticity and retro style to your home with this unique decorative plaque. Crafted from durable metal sheet, it combines vintage charm with long-lasting quality. Features: Limited Edition – N°1 from the bonding VBSA collection Dimensions: 30 cm (length) x 20 cm (width)...
Reference: 9505140
The KNIPEX rubber and universal joint cutter is a high-quality professional tool designed to cut various types of rubber joints easily and precisely. Its sturdy, ergonomic design makes for a comfortable grip and high precision when cutting. Ideal for bodybuilders, garages and other professionals who need to cut gaskets cleanly, these pliers are suitable...
Reference: F1K
PRIMERLESS windshield bonding. FAST PRIMERLESS application is different from the traditional application, it consists of using our F1 activating cleaner followed by the "F1K" polyurethane bonding agent compared to the traditional application composed of 3 products (degreaser, primer and bonding). VEHICLE CURING TIME Curing time (23°-50%) Airbag: 1 hour -...
Reference: POSTER-CPB
Windshield bonding process poster ( including technical different steps ) for a proper use Available for export only with a product order. No delivery possible on its own
Reference: 501K-310
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. FAST-drying, one-component polyurethane bonding agent that reacts with humidity in the air to form a strong and elastic seal. The adhesive is used...
Reference: LING-80
LING-80 wipes are specially designed for professionals in the bodywork, carpentry and public works sectors and for any application on sensitive surfaces. They effectively remove traces of windshield bonding putty, aluminum or PVC carpentry assembly glue, as well as bitumen stains, while preserving the quality of your hands and tools. Characteristics:...
Reference: Q-BOND-PRO
Adhesive, filling and reiforcing powders for repairingQ-BOND professionnal kit Q-BOND is one of the finest products for repairing various types of breaks, cracks and other damages to wide range of items. It has received various awards for outstanding quality and superior performance. For more serious repairs there is the two-part system with unique...
F1 cleaner activator can only be used with our F1FC and F1K Windshield Bonding.
Apply a single coat with a felt applicator, then wipe clean with a dry lint-free cloth or cleaning towel (BOB-FIBRE or BOB-CHAM).
Sold individually or in box of 12
