VBSA awarded ECOVADIS label
Banner
Sold in packs of 10
compatible brands :
|
For Opel |
|
|
Corsa C |
Windshield clips |
Reference: 5555
Improve the acoustic comfort and durability of your vehicles with this versatile soundproofing plate. Key features: Self-adhesive: Fast, easy and time-saving application. Soundproofing and anti-vibration protection: Ideal for floors, doors, trunks, hoods and other sensitive vehicle areas. Exceptional malleability: Conforms perfectly to the shape of the...
Reference: DSB-2002
Effectively protect and soundproof car doors with this polyethylene foam film specially designed for professionals. Key features: Optimum protection: Acts as a barrier against vibration, moisture and impact, extending door life. Effective soundproofing: Reduces external noise for improved acoustic comfort inside the vehicle. Self-adhesive: Easy to apply...
Reference: CGE-148
Clip removal tool This tool is used to remove plastic clips on door linings. It fits easily down into the recessed area and then can slid under the head of the cowling clip. You then pull up on the center locking part and the clip can be removed. - 235 x 35 x 30 mm - 165 g
Reference: CCR-819
EQUALIZER® cowling clip removal tool If expension-type cowling worked the way they were designed, you would simply unscrew the plastic screw and the clip would come out. Unfortunately, they seldom work correctly. Our cowling clip removal tool has a small sharp screw that screws into the plastic head and pulls the screw out. The clip will then collapse and...
Reference: 501FC-310
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. FAST-drying, one-component polyurethane bonding agent that reacts with humidity in the air to form a strong and elastic seal. The adhesive is...
Reference: CS-696
EQUALIZER® ClipSaver door upholstery remover The front of the tool is tapered so it will fit easily under a clip. Spread the jaws slightly so they will go under and around the clip. Then, close the jaws and it removes the clip without damaging it. Great for the removal of door panels. - 230 x 76 x 51 mm - 205 g
Reference: PH-1355
Curved Door Upholstery Remover For removing plastic fasteners in confined places. It is the same upholstery remover as the one shown above, but it is instended for use on the front part of the door where the door jam will often interfere with the removal of the door panel. Place the notch in the tool over the fastener and pry the fastener out the hole. It...
Reference: AP-6205
Tool declipsor SPRINGERTOOL The distinct precision curvature of the Springer Clip Removal Tool provides a varaible load distribution, safely moving the load point along the tool as more leverage is applied The tapered tip allows entry under closely fitted parts and the rounded edges avoid damage to the trim or vehicle. No matter a body shop you will be...
Reference: Q-BOND-PRO
Adhesive, filling and reiforcing powders for repairingQ-BOND professionnal kit Q-BOND is one of the finest products for repairing various types of breaks, cracks and other damages to wide range of items. It has received various awards for outstanding quality and superior performance. For more serious repairs there is the two-part system with unique...
Reference: GBM-27
The essential tool for precise, safe disassembly of bodywork and interior components. This set of 27 spatula levers is specially designed to meet the needs of bodybuilders and garages. It makes it easy to dismantle mirror faces, interior trim and other delicate components, without requiring the use of other protection. Advantages: Safe work: Allows work...
Reference: G-KNYL
Discover protective gloves that combine comfort and precision, perfect for detailed work. Made of flexible nylon, they offer excellent dexterity while guaranteeing a secure grip thanks to their polyurethane coating. Characteristics: Flexible and snug: Fit the hand perfectly for optimal comfort Polyurethane coating: Ensures better grip and increased...
Reference: CTD-607
Recessed Cowling Clip RemoverSome self-locking cowling clips are recessed down into the cowling. They are not the type that look like a Phillips or TORX®screw, but are the type that can be removed with a tool like the CGE-148. The only problem is the TPE657 will not reach downinto the recessed area and go under the head of the clip. If you manage to force...
Reference: KIT-AGRAFES-ECO24
SET OF WINDSHIELD CLIPS AND STAPLES Contains the 32 most frequently used references Box size: L: 46.5cm x W: 38cm x H: 7cm See all clips in the page description
Reference: CG-200-GVF
The Standard Pneumatic Rubber Cutter is designed to quickly and effortlessly remove windshields by cutting through adhesive with its efficient oscillating blades. Its built-in speed regulator allows for precise control during use, while the blades can be adjusted to 12 different positions to suit all configurations. Compact and easy to maneuver, it is...
Reference: TUBE-MILWAUKEE
Replacement tubes compatible with Milwaukee 12V and 18V battery guns. Available in 310-400 ml and 600 ml versions, they allow you to use cartridges or cans according to your needs. Ideal for bonding or sealing applications, these tubes guarantee smooth, even distribution. Robust and reliable for intensive professional use.
Reference: 1040-137
This replacement piston is specially designed for POWERPUSH 18V battery-powered piston guns, ensuring optimal pushing power and smooth operation during extrusion. Made with robust materials for maximum durability, this piston guarantees consistent performance even with intensive use. Easily replace your worn piston to extend the life of your gun and...
Reference: JU109
Universal mouldingsExcellent forming and adhesion. Remain flexible even withlow temperatures. Butyl adhesive- No cracking, no weakness, no distorsion REF-JU109• 31 mm x 22,8 mFor T4 PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)
Reference: ECHAFAUDAGE-2M50
MOBILE SCAFFOLDINGIN ALUMINUM - LESS LONGSize of the platform of 2.50MAttention: Overall width: 2.67M with Ergots
Reference: TKS-100
Trapezoid blades. In a pratical dispenser. Our replacement blades for utility knives are 0,6 mm thick, so they are very sturdy. These blades are in a safety dispenser with a suspension hook so as to avoid any risk of injury. You take new blades by sliding them out from the above side of the dispenser while youdispose of the worn out blades by sliding them...
Reference: 1040-192
Ensure the watertightness and protection of your POWERPUSH battery powered spray gun with this specially designed end cap. Made of a robust and resistant material, it keeps the contents of the tube in place, thus avoiding any leakage or loss of product during use or storage. This cap is an essential accessory to guarantee the durability and performance of...
Reference: CHARG-FSC1.7
Ensure fast, efficient recharging of your FEIN 18V batteries with this charger specially designed to meet the needs of professionals. Key features: Optimum compatibility: Compatible with FEIN 18V batteries RÉF. BAT18-FSC1.7 Fast charging: Reduces waiting time for continuous work without prolonged interruptions. Advanced charging technology: Protects your...
Reference: KPM-4169
Dimension: 69 x 41 x 2,0 mm Version: DAF CF(2) / DAF LF(2) / DAF XF(2) / IVECO Stralis(2) / VOLVO FL(2) Color: Black Quantity: 5 pieces
Reference: 5026-400-20V-EU-N266
In good condition Only a few cosmetic defects shown in the photos – Only 1 unit available Second Life Warranty: 6 months Powerpush 20V Battery Gun The PowerPush gun is designed to deliver unmatched power and optimal efficiency, ensuring smooth and effortless application of PU in any situation. Powerclutch Transmission: Improves extrusion recovery speed...
Reference: RL-170
Suction cup with handle diameter 70 mmDurable quality suction cup. Adaptable on glass, marble, ceramic.Ideal to remove and install quarter glass.Loading capacity : 12 kgREF. RL-170Sold individually
Reference: DESTOCK-FRE-080-P
To prevent the corners of hubcaps from sticking out, they are often attached with adhesive tape. However, this method carries risks: adhesives can react chemically with the vehicle's paintwork, causing damage. The ideal solution? Our retaining tool, specially designed to secure hubcaps without compromising paint quality. Advantages : Optimum protection:...
Reference: DES3-BACP
Add some clever storage space to your workshop trolley with this small side tray, ideal for storing hand tools, consumables, or small parts. Its side mounting allows quick access without cluttering up the main work surface. Features: Side mounting on the workshop trolley Dimensions: L: 35 cm x W: 24 cm x H: 20 cm Compact, sturdy, and easy to install
Reference: TS2016
ULTRA-POSE BUS IS ADAPTED FOR THE REMOVAL AND INSTALLATION OF VERY LARGE WINDOWS BY A SINGLE OPERATOR (trucks, subways, buses, panoramic roofs...) ADVANTAGES Gearing system can be operated manually or with a screwdriver Wheel lock for straight forward and backward movement Foldable for easy transport and storage 1 person only to load and unload it from a...
Reference: TSP-292
Effectively protect your vehicle in tight spaces with our bodywork protection foam. Ideal for parking garages or workshops where cars are parked very close together and are difficult to move. Characteristics: Dense rubberized foam: One side is made of dense rubberized foam that provides optimal protection against impacts and scratches. Flexible suction...
Reference: MTS-068
Hook and pick setThis set of mini hooks is very helpful to remove joints and coverings while avoiding any possible damage.This practical set contains hooks in different shapes and a pick. The length of these tools is only 13mm! - 127 x 25 x 25 mm - 280 g
Reference: DST-734
REF-DST-734 T-handle wire threader with hole Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.120 x 26 x 10 mm • 20 g
Reference: ROLL-OUT-2000
Windscreen cutting kitThis cutting tool allows to one operator only to cut outwindshields from inside the car.Supplied with DVD training and complete informations.
Reference: WP738-E
Used to remove urethane and butyl from the pinchweld. The tool has a hardened steel blade of 24 mm wide that can be sharpened dozens of times. - 200 x 29 x 29 mm - 120 g
Reference: HDS-480NEW
Adjustable windshield trestleREPAREGLASS- width multi-adjustable for different lengths and weights so as carry all sizes of windshields.- Very sturdy version, load capacity up to 250Kg.- Made of electroplated steel, diameter: 30 mm.- Resistant foam at the base of the trestle.- 105 cm x 95 cm x 110 cm6.700 kg
Reference: VP-230-E-BATT
Battery for automated suction cup VP-230-E, with charge indicator.
Reference: SB-880
When working with glass, wearing protective eyewear is essential to ensure eye safety against shards and debris. Our shatterproof glasses offer side and front protection thanks to their ergonomic design. They can be worn over most prescription glasses, ensuring optimal comfort for all users. Features: - Complete protection: Protects the eyes against...
Reference: FSC1.7B2
Discover a powerful, precise and completely autonomous solution for your automotive work. This FEIN cordless knife is designed to meet the highest demands of glass professionals, combining mobility, performance and reliability. Technical specifications: Battery voltage: 18 V Battery capacity: 5 Ah Oscillations: 10,000 - 19,500 rpm Amplitude: 2 x 1.7°...
Sold in packs of 10
