Kit PLV spécial VBSA - Gratuit

Reference: HOS-2000-L

2.50M long connector hose for Bus and Truck for 1110 and PMP-ADVANTAGE pumps

Long connection hose for bus and truck, vans, trams, etc... compatible with 1110 and PMP-ADVANTAGE vacuum pumps, our 5095 and 5096 injectors. Used in our 1330 and 1330SPECIAL kits, not compatible with our 1320 and TERMINATOR 1 and 2 kits. Length : 2.50M

Reference: HOS-2001

Nylon cleaning brush for HOS-2000 hose

Nylon cleaning brush for HOS-2000 connection hose, for cleaning excess windshield repair resin.

Reference: 645

Brand: REPARBRISE

12V carbide drill for impact drilling

12V carbide drill supplied with integrated chuck lock, for drilling the impact point on your windshield before injecting the resin. Use with our 934, 4509w and 701 carbide drills. This drill can also be used with a felt for polishing the impact after repair. 4M cable extension

Reference: HOS-2000

1M connector hose for 1110 pump and PMP-ADVANTAGE

Connection hose for vacuum pump 1110 and PMP-ADVANTAGE and injector 5095 or 5096 for windshield repair. Length: 1M

Reference: 1650

Brand: REPAREGLASS

REPAREGLASS® junior WINDSHIELD REPAIR Tool box

Discover our 1650 windshield repair kit with all the tools and accessories you need to carry out high-quality repairs on your windshield. Professional equipment. REPAREGLASS® is used and recommended by a large number of car manufacturers. Complies with AFNOR NF standard No. X5021, REACH standards, and UTAC regulations No. 43 of 1987 and 2008. Various...

Reference: HOS-1000-T

2.50M vacuum pump connector hose for TERMINATOR 1 and 2 kits

Vacuum pump connector hose for TERMINATOR 1 and 2 kits - Ideal for repairing impacts on the Windshields of utility vehicles, trucks, buses, trams, etc....  Length: 2.50 M

Reference: 945

Brand: REPARBRISE

Square mirror REPARBRISE (Plexiglass)

Reparbrise 945 Plexiglas square mirror for repairing windscreen impacts. This mirror allows you to view the impact throughout the repair process. Dimensions: 9.5cm x 9.5cm

Reference: 230

Brand: REPAREGLASS

Aluminium Empty case 331 x 257 x 68 mm

REF-ALK230 Couteau télescopique ajustableIl s’ajuste de 45 à 50 cm de longueur. S’utilise avec les lames TKS-100 et ULB-582. Lames en complément stockées sous le capot

Reference: HOS-2002

Cleaning brush for injector 5069 or 5062

Nylon cleaning brush for injector 5069 or 5062 to clean excess injection resin from the windscreen

Reference: 971

Brand: REPARBRISE

Round polishing felt, special impact finish

Round polishing felt to perfect the finish of surface impacts. Use our 971 felt with our 949 polish using our windshield polishers ref.10357, or 645. Sold individually

Reference: 10357

Rechargeable battery-powered 7.2V carbide drill for impact drilling

Rechargeable 7.2V carbide drill delivered with battery and charger, for drilling the impact point on your Windshield before injection of the resin. Use with our 934, 4509w and 701 drills. This drill can also be used with a felt pad (ref.971) to polish the impact after repair.

Reference: 958

Brand: REPARBRISE

Suction cup gel for adhesion to glazing

Our suction cup gel is specially designed to strengthen the adhesion of suction cups on windshields and car windows. 1. Strengthening the adhesion of suction cups Stronger adhesion: This suction cup gel is specially formulated to improve the adhesion of suction cups used in windshield and car window repairs. It ensures a strong and stable hold, even on...

Reference: 994CLAP

Brand: REPAREGLASS

Plunger for Injector Inox 994

Inox 994 injector plunger for windshield impact repair

Reference: 1412

Brand: REPARBRISE

Glass-primer 1412 for repairing missing glass on windshields

Our Glass-Primer 1412 is an adhesion primer for repairs to large areas of missing glass on the surface of your windshield. 120ml bottle

Reference: PORTE-CT

Adhesive sticker holder for car inspections - pack of 100

Adhesive sticker holder for neutral technical inspection Our sticker holders are completely self-adhesive over their entire surface. Pack of 100 sticker holders (75 x 75mm)

Reference: 818-12V

12V cigar lighter charger

12V cigar lighter charger compatible with charging cable 1048-CABLEUSB. Works with our UV-1048 lamp, our 818 windshield heater, our LAMPE-3 and our LAMPE-F headlamp.

Reference: TER-BATTERIE

Brand: TERMINATOR

Battery for Kit TERMINATOR 1 and 2 and ULTRAPOSE EVOLUTION

Battery for TERMINATOR 1 and 2 Kit and ULTRAPOSE EVOLUTION. You can recharge this battery directly on the TERMINATOR or ULTRAPOSE EVOLUTION, using our TER-CHARGEUR charger.

Reference: 51

Brand: REPAREGLASS

51 REPAREGLASS® injection bridge for windshield repairs

Our 51 REPAREGLASS® injection bridge is a support for injecting windshield repair resin and is used with our 3200 injector.

Reference: TER-CHARGEUR

Brand: TERMINATOR

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits. Connect the charger to your TERMINATOR or ULTRAPOSE EVOLUTION to recharge the battery.

Reference: 931

Brand: REPARBRISE

Single 135 mm UV neon for 1046 and UVB-150 lamp

Single U.V. neon 135 mm - 931- for 1046 and UVB-150 lamp 

Reference: 9620

Brand: REPARBRISE

9620 REPARBRISE® aluminium injection bridge for windshield repairs

Our 9620 REPARBRISE® injection bridge is a support for injecting windshield repair resin. It can be used with a 3200 manual injector, but also with the 994 vacuum/pressure injector. You'll find our 9620 bridge in our 1320, TERMINATOR and TERMINATOR2 windshield repair kits.

Reference: HOS-2010

Rubber Seals (x2) for HOS-2000, HOS-2000-L, HOS-1000-T vacuum pump hoses

Set of 2 replacement rubber seals for HOS-2000, HOS-2000-L and HOS-1000-T hose It is important to change the rubber seals frequently to ensure that the windshield repair resin is injected correctly. The rubber seal is situated inside the connector on your hose. If there is a leak in the hose, you can change the seal by using a wrench and unscrewing the...

Reference: LR919

Brand: REPAREGLASS

Standard injection resin LR919

Discover our LR919 injection resin for repairing windshield impacts, a solution for restoring the transparency and strength of your car windows. (5 to 8 repairs). 1ML

Reference: 974

Special syringe for injecting resin to repair windshields

The syringe ref.974 will allow you to take the injection resin from inside the bottle or pipette and then inject it into the injector. You can also use the syringe to fill drill holes and cracks in your Windshield.

Reference: 940

LED lighting mirror (glass)

LED lighted mirror (glass) for repairing windshield impacts, this mirror allows you to visualise the impact throughout its repair, it has LED lighting. Size. 6.5cm x 4cm

Reference: 1046

Brand: REPARBRISE

UV LAMP - 12V - Special Resin Curing

12V UV lamp with timer To connect this lamp to the 230V mains, simply adapt our mini transformer Ref.512. Please note: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon (ref.931) at a frequency defined in accordance with standard NF R61-980, i.e: Continuous operation for 15 hours or approximately 90 repairs....

Reference: POSTER-TERMINATOR

Poster TERMINATOR automatic windshield impact repair process 50 x 70 cm

Poster TERMINATOR automatic windshield impact repair process 50 x 70 cm Available for export only with a product order. No delivery possible on its own

Reference: 985

Vaccum plug for suction of impact impurities

Vaccum plug to remove impurities from the windshield impact. Diameter 3cm The Vaccum plug is used with the vacuum pump ref.993.

Reference: 617

Cylinder vacuum nozzle

Cylinder vacuum nozzle. Removes air trapped in the impact. Supplied with specific hose without connection and a smaller diameter. (for use with the 3200 cylinder and 993 vacuum pump).

Reference: 5096

Brand: REPARBRISE

Large impact packer 5096 for 1330 and 1330SPECIAL kits

Large impact injector for kit ref.1330 and kit ref.1330SPECIAL. Supplied with seal, not compatible with our old 1310 kit.