• VBSA labellisé ECOVADIS

  • Pack
Trouver mallette, réparation, pare-brise, outils, kit, accessoires Repareglass Junior 1650 - vbsa France
  • Trouver mallette, réparation, pare-brise, outils, kit, accessoires Repareglass Junior 1650 - vbsa France
  • Trouver mallette, réparation, pare-brise, outils, kit, accessoires Repareglass Junior 1650 - vbsa France
  • Trouver mallette, réparation, pare-brise, outils, kit, accessoires Repareglass Junior 1650 - vbsa France

Kit REPAREGLASS® junior réparation pare-brise

1650

Découvrez notre mallette de réparation pare-brise 1650 avec tous les outils et accessoires nécessaires pour effectuer des réparations de qualité sur votre pare-brise. Matériel professionnel.

REPAREGLASS® est utilisé et référencé par un grand nombre de ­constructeurs automobiles.

Répond à la norme AFNOR NF n° X5021, aux normes REACH et aux normes UTAC règlement n°43 Européen de 1987 et 2008.

Différents types de réparations sont possibles :

  • Impacts à bulles
  • Impacts à bulles étoilées
  • Impacts à étoilés
  • fentes
Description

COMPOSITION DE LA MALLETTE

1 x Ref. 230 Valise aluminium 
1 x Ref. 51 Pont PVC 
1 x Ref. UVB-150-T Lampe UV pour polymérisation avec temporisateur 12V 
1 x Ref. 958 Pot de produit pour ventouse 
1 x Ref. 945 Miroir 
1 x Ref. 979 Stylo lampe 
1 x Ref. 949 Flacon de polish 60ml 
1 x Ref. 921 Résine injection Reparbrise® (5 à 8 réparations) 
1 x Ref. 645 Perceuse carbure 
1 x Ref. 934 Mèche carbure 
1 x Ref. 959 Stylo pointe carbure 
1 x Ref. 948 Lames de grattage (x5) 
1 x Ref. 943 Résine finition Reparbrise® (+ de 60 réparations) 
1 x Ref. 970 Feuilles mylar rigides (x10) 
1 x Ref. 969 Grande sonde 
4 x piles pour lampe UVB-150-T 
+ 1 Manuel technique

Détails du produit
1650
Vous pourriez également aimer

Reference: 1412

Marque: REPARBRISE

Glass-primer 1412 pour réparation manque de verre sur pare-brise

Notre Glass-Primer 1412 est un primaire d’adhésion spécialement conçu pour les réparations de manque de verre en surface sur votre pare-brise. Il prépare efficacement la zone endommagée afin de favoriser l’adhérence de la résine, garantissant ainsi une réparation solide et durable même en cas de manque de matière important. Flacon de 120 ml.

Reference: 936

Marque: REPARBRISE

Flacon de dry out 936 pour nettoyage de vieux impacts

Notre nettoyant Dry Out 936 est spécialement étudié pour le nettoyage et le séchage des impacts ou fissures avant la réparation de votre pare-brise. Idéal pour traiter les vieux impacts, notamment ceux de plus de 3 semaines, ce produit prépare parfaitement la surface afin d’assurer une adhérence optimale de la résine et une réparation durable. Flacon de...

Reference: 818

Chauffe pare-brise pour réparation d'impacts

Le CHAUFFE PARE-BRISE tempère l’endroit de la réparation, alimentation usb, fourni avec adaptateur + 5 Thermomètres Réf. 961 Allume-cigare 12v et secteur 220v, câble 2.5m, idéal pour la réparation d'impact, couleur rouge ou noir selon arrivage

Reference: 438

Marque: REPARBRISE

Mini pare-brise sur Présentoir - Dimension 250x110 mm

Mini pare-brise sur présentoir 250  x 110 mm, nous avons volontairement laissé de la place au centre pour que vous puissiez y intégrer votre logo. Ce mini pare-brise permet au client de se rendre compte du résultat le réparation après d’un impact sur le pare-brise. Il est conseillé de le placer à la réception clientèle.

Reference: CC-1058

GANTS NITRILE élastiques et extensibles (NON POUDRÉS)

Nos gants en nitrile offrent une excellente barrière biologique tout en garantissant un confort optimal grâce à leur élasticité et extensibilité. Conçus sans latex, ils réduisent les risques d'allergies tout en assurant une protection efficace contre les virus et produits chimiques. Non poudrés, ils minimisent les risques de contamination et conviennent...

Reference: GAB-VBSA

Marque: REPARBRISE

Gabarit champ de vision pour définir les zones de réparation pare-brise

ZONE DE REPARABILITE : Zone 2 : Dans cette zone, la réparation n'est pas autorisée. Zone 1 : Lorsqu'elle est possible, la réparation est autorisée . A l'aide de notre gabarit champ de vision il vous sera facilement possible de déterminer les zones de réparations possibles ou impossible. Référez-vous à la La norme AFNOR NF R19-601-1 qui établit le...

Reference: 1048

Marque: REPARBRISE

Lampe UV à LED - Polymérisation ULTRA RAPIDE

Cette nouvelle lampe de polymérisation va vous faire gagner, beaucoup…. Beaucoup de temps! La polymérisation de la résine ne vous prendra que 50 secondes ! A compter du 05.04.2024, nos lampes UV 1048 seront équipées d'une prise USB-C, elles seront donc livrées avec un câble USB-C renforcé réf. 1048-CABLEUSBC et d'un chargeur réf. 818-220V.

Reference: PACK-RESINES

Marque: REPARBRISE

Pack de consommables pour réparation impact

PACK CONSOMMABLES REPARATION PARE-BRISE REPARBRISE ENVIRON 15 à 20 REPARATIONS ! Nous vous proposons notre pack de consommables spécial réparation pare-brise, il se compose d’un ensemble de consommables indispensables afin d’effectuer facilement vos réparations pare-brise, à savoir : - 3 x REF-921N Résines REPARBRISE (Conforme AFNOR  & UTAC règlement...

Reference: BLACKNIT

Gants nitrile Noir de protection (non poudrés) épais spécial réparation divers

Offrez à vos mains une protection optimale avec nos gants en nitrile noir non poudrés, conçus pour une utilisation professionnelle et polyvalente. Recommandations d’utilisation : Stockage dans un endroit froid et sec, à l’abri de la chaleur excessive (température maximale : 40 °C). Boîte ouverte à protéger des rayons UV et de l’exposition directe au...

30 other products in the same category:

Reference: 1048-N256

Brand: REPARBRISE

LED Light lamp ULTRA FAST CURING - Second Life - N256

General operation: RAS Good condition - 1 Only one available Second Life warranty: 6 months Our new polymerisation lamp will save you a lot of time.... A whole lot of time! The resin will polymerise in just 50 seconds! Normally, with a traditional UV lamp, it takes 10 to 15 minutes to cure! But that's all over now! Thanks to our new REF-1048 LED UV lamp,...

Reference: 272

Spreader bar for windshield crack repairs

This tension bar is specially designed to hold the crack in place during repair and provides optimal adhesion throughout the process. Ideal for professionals and specialized workshops, this product allows for careful and safe work on cracks or chips in the windshield.

Reference: 946

Brand: REPARBRISE

Large impact windshield pit adapter

This adapter for large impacts is specially designed to fit our 3200 and 994 injectors, allowing you to repair large impacts on your windshield. It is compatible with the following kits: 1320, 951, TERMINATOR 1, and TERMINATOR 2. Please note: sold without seal. The seal reference is currently being restocked (ref. 983).

Reference: 948

Special windshield repair scraper blades - Pack of 5

These scraping blades are specially designed to remove excess finishing resin after a windscreen repair. 1. Precise, scratch-free scraping Impeccable finish: These scraping blades are specially designed to effectively remove excess finishing resin after a windscreen repair. They enable precise scraping without damaging or scratching the repaired surface,...

Reference: FIX-2025

Brand: REPAR'VIT

Replacement plunger piston for injection bridge and suction cup

The replacement piston is specially designed to replace the original piston in your windscreen repair equipment. It is compatible with our REF-2000, REF-367, and REF-9620 injection bridges, as well as our REF-GEZ-543-1 suction cup. This replacement piston ensures that your tools continue to perform at their best, guaranteeing precise and reliable resin...

Reference: 994JOINT

Brand: REPAREGLASS

Seal for 994CLAP plunger for 994 injector

Valve seal 994CLAP for injector 994 1. Effective solution for repairing leaks Quick repair of leaks: This 994CLAP valve seal is designed to solve leak problems on the upper end of the 994 injector. By replacing this small black seal, you can eliminate leaks and ensure optimal operation of your injector. Increased reliability: By replacing the worn...

Reference: 645-N33

Brand: REPARBRISE

12V carbide drill for impact drilling - 2nd life

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months 12V carbide drill supplied with built-in chuck lock, specially designed for drilling the impact point on your windscreen before injecting the resin. It is used with our 934, 4509w and 701 drill bits to ensure precise and efficient drilling....

Reference: SATELLITEDEPONT

Satellite for KIT-FENTES-RPB

The 3200 injector satellite is an essential accessory for the KIT-FENTES-RPB, designed to enable manual injection of crack resin when repairing cracks or splits in windshields. It attaches directly to the 3200 injector and ensures precise and controlled diffusion of the resin into the crack. This satellite is supplied with an O-ring to ensure...

Reference: 1048-N248

Brand: REPARBRISE

LED Light lamp ULTRA FAST CURING - Second Life - N248

General operation: RAS Good condition - 1 Only one available Second Life warranty: 6 months Our new polymerisation lamp will save you a lot of time.... A whole lot of time! The resin will polymerise in just 50 seconds! Normally, with a traditional UV lamp, it takes 10 to 15 minutes to cure! But that's all over now! Thanks to our new REF-1048 LED UV lamp,...

Reference: 949

Brand: REPARBRISE

Windshield impact polish bottle

Polish specially designed to polish the impact point on your windscreen, for a quality finish 1. Professional quality finish Precise and careful polishing: This polish is specially formulated to provide a perfect polish of the impact points on windscreens. It restores the transparency of the glass and provides a smooth and shiny finish after a repair....

Reference: 5095-N377

Brand: REPARBRISE

Standard Injector 5095 for kit 1330 and 1330SPECIAL - 2nd life

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Standard injector designed for windshield repair kits ref. 1330 and 1330SPECIAL. This injector ensures precise resin injection for common impacts. It comes with a seal to guarantee a perfect seal during repair. Not compatible with the old kit...

Reference: 970

Brand: REPARBRISE

Rigid plastic / mylar squares for curing resin - Pack of 10

Our special rigid plastic sheets, also known as mylar sheets, are specially designed for the polymerisation of the resin on the surface for impact repair. 1. Optimal solution for resin polymerisation High-quality Mylar sheets: These rigid plastic sheets are designed to facilitate and optimise the polymerisation of finishing resin on windscreen impacts,...

Reference: 993

Brand: REPARBRISE

Pressure vacuum pump for REPAR'VIT Senior 1320 kit

The vacuum/pressure pump is an essential tool for optimizing windshield impact repairs. Supplied with its hose ref. 996, it provides a quick and efficient connection between the injector and the pump, making it easy to use. It creates a vacuum to suck out air and impurities from the impact area before the resin is injected. By alternating between vacuum...

Reference: KIT-FENTES-RPB

Brand: REPARBRISE

Specific repair kit for cracks

Repair cracks effectively and avoid replacing the windshield! This complete kit is specially designed for the professional repair of cracks in windshields, particularly those found on heavy trucks, buses, and utility vehicles. It contains all the tools and products needed to permanently repair even the most complex cracks and ensure a high-quality...

Reference: 969

Long probe for impact repair

The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for efficient and controlled repairs.

Reference: 969-N368

Large probe for impact repair - 2nd LIFE - N368

Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: HOS-2000-L

2.50M long connector hose for Bus and Truck for 1110 and PMP-ADVANTAGE pumps

Discover our long connection hose specially designed for buses, trucks, utility vehicles, trams, etc. Compatible with the 1110 vacuum pumps and PMP-ADVANTAGE, as well as our 5095 and 5096 injectors, it offers you an ideal range for large windows. Used in our 1330 and 1330SPECIAL kits, it is not compatible with our 1320 and TERMINATOR 1 and 2 kits. Length:...

Reference: 940

LED lighting mirror (glass)

Designed to facilitate windshield repairs, this glass mirror with integrated LED lighting allows you to see the impact perfectly throughout the repair. Its compact size and targeted brightness ensure excellent visibility, even in poorly lit areas.

Reference: 3202

Brand: REPARBRISE

Exchangeable nozzles for REPARBRISE 3200 injector (pack of 5)

This set of 5 interchangeable tips is specially designed for the REPARBRISE 3200 injector. When repairing windshields, uniform sealing is essential to ensure effective injection of the resin without leakage. That is why it is recommended to replace the nozzle tip of the 3200 injector as soon as it shows signs of wear. These nozzle tips ensure optimal...

Reference: 1048-N178

Brand: REPARBRISE

LED Light lamp ULTRA FAST CURING - Second Life - N178

General operation: RAS Very good condition - 1 Only one available Second Life warranty: 6 months Our new polymerisation lamp will save you a lot of time.... A whole lot of time! The resin will polymerise in just 50 seconds! Normally, with a traditional UV lamp, it takes 10 to 15 minutes to cure! But that's all over now! Thanks to our new REF-1048 LED UV...

Reference: 9620

Brand: REPARBRISE

9620 REPARBRISE® aluminum injection bridge for PB repair

The 9620 REPARBRISE® injection bridge is a sturdy aluminum support designed to ensure precise resin injection during windshield repairs. It is compatible with the 3200 manual injector and the 994 vacuum/pressure injector, offering great versatility depending on the repair method chosen. This bridge is included in our professional kits: 1320, TERMINATOR,...

Reference: SOUS-MAIN

VBSA glazing repair and tool kit

Sous - main glass repair and equipment tool range VBSA with product referencesAllows you to have the most frequently used references close at handOnly available in French

Reference: M-TER2

Brand: TERMINATOR

TERMINATOR 2 machine only - AUTOMATIC WINDSHIELD REPAIR SYSTEM

Now you can carry out up to three repairs simultaneously! Compatible with the first-generation case Easily accessible battery Available as a module for the à la carte tool trolley Indication of serial number and software version Patented technology Please note that the M-TER2 is not compatible with all types of UV lamps, DRILLING EQUIPMENT or other...

Reference: 439

Brand: REPAREGLASS

Circular windshield impact protection stickers (customisable) - 100 pack

Round sticker Ø 3cm pack of 100 to personalise For impacted windshield, your customer has an impact and you can't repair it immediately. Protect the impact with our protective sticker for a few days, to avoid impurities in the windscreen. The round self-adhesive patch protects the impact. It protects it from moisture and impurities before the repair is...

Reference: 1414-V2

Brand: REPARBRISE

Cleaning kit for old windshield impacts

The old impact cleaning kit is specially designed to treat dirty impacts on windshields before repair. It removes residue, dust, and impurities that prevent the resin from adhering properly. Thanks to its professional components, it provides deep cleaning to optimize the adhesion and durability of the repair. Advantages: Removes stubborn dirt from old...

Reference: 51

Brand: REPAREGLASS

51 REPAREGLASS® injection bridge for windshield repair

The REPAREGLASS® 51 injection bridge is an essential support for professional windshield repairs. Designed to hold the 3200 injector firmly in place, it allows for precise and stable injection of resin directly into the impact area. Compatible with our Kit-1650 and Kit-1700 repair kits, this bridge guarantees fast, efficient, and perfectly centered...

Reference: 1300

Brand: REPAR'VIT

1300 REPAR'VIT JUNIOR windshield repair kit

REPAR'VIT® is used for various types of impact repairs: Bubble impacts Impacts with star-shaped bubbles Spangled impacts cracks Discover our glass repair case, complete with all the tools and accessories you need to carry out quality repairs to your windscreen. Ideal for professionals. This windshield repair kit is similar to the REPAR'VIT®. The pump...

Reference: 1700

Brand: REPAREGLASS

REPAREGLASS® Senior 1700 Tool box

REPAREGLASS® is used and approved by a large number of car manufacturers. Discover our glazing repair kit, complete with all the tools and accessories you need to carry out quality repairs to your windscreen. Ideal for professionals.