Lame de découpe à froid inversée avec revêtement de protection 19mm ULTRAWIZ

Reference: NMT-448

Mechanical pick up

Mechanical pick up The use of telescopic magnet could be sometimes impossible to use because of non ferrous items. It is times like these when you need our Mechanical Pick-Up. It is designed with steel fingers that are spring-loaded that will grip an item up to 2,5 cm in diameter.

Reference: WK3S

Serrated, multi-purpose, bent BTB blade, 200mm

Serrated, multi-purpose, bent BTB blade, 200mm

Reference: DST-734

T-handle wire threader with hole

REF-DST-734 T-handle wire threader with hole Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.120 x 26 x 10 mm • 20 g

Reference: RMI-309

Rearview Mirror Installer

Rearview Mirror Installer Use to install spring-loaded rearview mirrors with easy Spring-loaded rearview mirrors are designed to detach from the windshield when hit by the air bag.  The Rearview Mirror Mounting Tool makes the job easy and reducing the risk of breaking the windshield.  To use: Set the upper jaw against the rearview mirror, put the nylon...

Reference: WK24Z

Deep offset, BTB blade, 150mm

Deep offset, BTB blade, 150mm

Reference: CG-200-GVF

Pneumatic cut-out + 6 blades

The Standard Pneumatic Rubber Cutter is designed to quickly and effortlessly remove windshields by cutting through adhesive with its efficient oscillating blades. Its built-in speed regulator allows for precise control during use, while the blades can be adjusted to 12 different positions to suit all configurations. Compact and easy to maneuver, it is...

Reference: 3007-K

Adjustable REPAREGLASS cold knife

The adjustable REPAREGLASS cold knife is designed to offer efficiency, speed, and precision when cutting. Thanks to its adjustment lever, you can extend or retract the blade in one simple movement, easily adjusting the cutting depth without having to unscrew the retaining nut. No more wasted time: this innovative system saves you considerable time while...

Reference: HDW5634FEUTRE

Felt for RAPTOR device

Felt for RAPTOR device

Reference: CAISSE-N446

Storage Case - 2ème VIE - N446

In fair condition Only a few minor cosmetic flaws are visible - Only 1 item available 2nde VIE Warranty: 6 months Storage case Length: 520 mm - Width: 280 mm - External Height: 270 mm

Reference: WK4S

Serrated, non-rigid, bent BTB blade, 190mm

Serrated, non-rigid, bent BTB blade, 190mm

Reference: ENK148

Pneumatic knife: EQUALIZER ® Ninja deluxe

The Equalizer® Ninja Deluxe kit is the essential tool for glass professionals for fast, precise and efficient cold cutting. Suitable for all types of vehicles, this pneumatic knife combines power, ergonomics and maneuverability, with up to 22,000 oscillations per minute for effortless work, even in the most complex areas. Key features: Exceptional...

Reference: DSS-175

One-man wire cut-out tool

One-man wire cut-out toolREPAREGLASSOne-man wire cut-out toolThis tool acts like another person sitting inside the vehicle pulling the wire back after you havemade your cutting stroke.Attached to the swivel is a spring that acts as a second person; you pull the wire out to make your cut and the springs pulls the wire back in. The spring is attached to a...

Reference: HB10

Heavy-duty snap-off blade

Heavy-duty snap-off blade- package of 10 pieces- 140 x 25 x 0.7 mm - 106 g

Reference: IRON-CUT-DELUXE

IRON CUT – Dual-Transmission Windshield Cutting System

The IRON CUT is a next-generation windshield cutting tool combining compactness, reliability, and performance. Thanks to its dual manual and electric drive, it ensures fast, precise, and safe cutting on all types of automotive glass. Designed and manufactured in France by VBSA, it is the new benchmark for glazing professionals. The IRON CUT is an...

Reference: FB153

Cutting blade, straight 50 mm

Lame à découper Fein 50 mm

Reference: LH-683

Christmas tree moulding remover

Reference: TB-102

Rope insert tool length of the rope: 9m (pour bus et poids lourds)

Rope insert tool.For the replacement of non-bonded windshields with rubber mouldings.The toll is delivered with a very resistant rope, the length of which (6 m) is enough. Can be used with private cars and trucks.

Reference: AIG-300

Wire guide

The wire guide's long, narrow shaft allows positioning the wire so it prevents the dash and interior mouldings from being damaged. Recommended above all for cars with a high windshield slope or with a bottom window bond that is hardly accessible. Of course, the wire guide can also be used from the outside.- 350 x 38 x 38 mm - 220 g

Reference: MRC1105-R4 - N424

Ratchet for ROLL-N-CUT kit - N424

Not available

Reference: Z5

Cold knife blade, extra fine 25 mm

Cold knife blade, extra fine - Sold individually - Cutting length: 25 mm - 18g CARTON OF 10

Reference: CROR-S

Brand: REPAREGLASS

Ball-tipped hook, with short shaft

Ball-tipped hook, with short shaft- 210 x 35 x 35 mm - 122 g

Reference: WKBX

Specific case for BTB material

SPECIFIC CASE FOR BTB MATERIALREF. WKBX

Reference: CAISSE-N397

Storage case L: 44 cm x H: 17 cm x W: 19 cm - 2nd LIFE - N397

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Storage case Length: 44cm - Width: 17cm - Height: 19cm

Reference: CAISSE-N398

Storage case L: 44 cm x H: 17 cm x W: 19 cm - 2nd LIFE - N398

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Storage case Length: 44cm - Width: 17cm - Height: 19cm

Reference: WFA-500

Arm Wiper puller

REF. WFA-500Arm Wiper pullerArm wiper puller especially designed forVolkswagen rear window models, Audi, Skoda,Seat, but also many others.Untight the button from the arm but do not release it( could caused damages on the plasticcompartments of the arm.) Position the jaw on thearm of the wiper, tight manually first, then use aratchet 3/8 to strongly tight...

Reference: DST-58

Curved wire threader 58 mm (package at 3 pièces)

Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...

Reference: WK28RM

RIGHT HAND INVERTED BTB BLADE 25MM

Right hand, inverted BTB blade, 25 mmManual or pneumatic use.

Reference: ROLL-OUT-2000

ROLL OUT Cutting tool

Windscreen cutting kitThis cutting tool allows to one operator only to cut outwindshields from inside the car.Supplied with DVD training and complete informations.

Reference: ZLN-914

Nylon wire - Ø 1.05 mm, Longueur : 100 ML - 2000 Newton

- Multi-purpose with 1 length (approx. 2 to 4 uses) - Does not scratch surfaces - No snags on the windscreen bay or windscreen seal - Can be used with all ratchet systems - Very fine Ø 1.05 mm, Length: 100 M 2000 Newton

Reference: CS-RC14

Handable rolling Tool-box

Toolbox on wheels Size: L:62 x W:30 x H:32 cm + 10cm in height with wheels 4 drawers of 22 x 20cm