Stylo lampe spécial réparation pare-brise - 2ème vie - N415

Reference: DPG

Vacuum pump calibration tester for windshield repair

It's imperative to test the calibration of your vacuum pump at minimum once a year, to ensure quality repairs for your customers. French Standard regulation NF R61-980... Frequency of use: once a year. This new regulation allows to ensure that the pressure and vaccum cycles made from the pump are correct ( Pressure tolerance is 0,1 Bar) in order to avoid...

Reference: 946

Brand: REPARBRISE

Large impact windshield pit adapter

This adapter for large impacts is specially designed to fit our 3200 and 994 injectors, allowing you to repair large impacts on your windshield. It is compatible with the following kits: 1320, 951, TERMINATOR 1, and TERMINATOR 2. Please note: sold without seal. The seal reference is currently being restocked (ref. 983).

Reference: 1110

Brand: REPAR'VIT

Vacuum-pressure pump for REPAR'VIT 1330 kit

The 1110 vacuum-pressure pump is specially designed to facilitate the repair of impacts on your windshield. It creates a vacuum, which helps to remove air and impurities from the impact area before the resin is injected. Alternating vacuum and pressure with your pump ensures uniform and effective injection of the resin into the impact, guaranteeing a...

Reference: FIX-5063-DESTOCK

Brand: REPAR'VIT

Aluminium screw for injection bridge 367

The aluminum screw for injection bridge 367 is specially designed to secure injectors 5095 and 5096 to the windshield. This screw guarantees perfect sealing during resin injection, which is essential for effective and long-lasting impact repairs. Made from high-quality aluminum, it offers strength and reliability for your windshield repairs.

Reference: 524

Brand: REPARBRISE

24V/12V voltage transformers for buses and trucks

24V/12V voltage transformers for buses and trucks

Reference: 959

Brand: REPARBRISE

Carbide tip pen for removal of impurities from windshield impact

The carbide-tipped pen is the ideal tool for effectively preparing an impact area prior to repair. It allows you to precisely remove surface impurities, ensuring optimal resin adhesion and a long-lasting repair. Essential for guaranteeing a clean, professional finish on damaged windshields.

Reference: HOS-2000-L

2.50M long connector hose for Bus and Truck for 1110 and PMP-ADVANTAGE pumps

Discover our long connection hose specially designed for buses, trucks, utility vehicles, trams, etc. Compatible with the 1110 vacuum pumps and PMP-ADVANTAGE, as well as our 5095 and 5096 injectors, it offers you an ideal range for large windows. Used in our 1330 and 1330SPECIAL kits, it is not compatible with our 1320 and TERMINATOR 1 and 2 kits. Length:...

Reference: 512

Miniature 220V/12V cigarette lighter voltage transformers

Miniature 220V/12V cigarette-lighter voltage transformers, for recharging equipment with a cigarette-lighter connector. Ex. UV lamp, drill, etc.

Reference: 983

Brand: REPARBRISE

Seals (X2) for large impact adapter 946

These 2 seals are specially designed for the 946 heavy-duty impact adapter. It is essential to replace them regularly to ensure optimal sealing when injecting windshield repair resin. A seal in good condition ensures effective repair and reduces the risk of leakage.

Reference: 969-N370

Large probe for impact repair - 2nd LIFE - N370

Very Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: FIX-2006

Brand: REPAR'VIT

Standard resin filler injector for REF -2000 bridge

Standard resin filling chamber specially designed for the REF-2000 injection bridge. It allows for efficient and controlled injection of resin during windshield repairs. Compatible with hose 996 Diameter: 0.9 cm.

Reference: 1110-N357

Brand: REPAR'VIT

Vacuum-pressure pump for REPAR'VIT 1330 kit - 2nd life

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months The 1110 vacuum-pressure pump is specially designed to facilitate the repair of impacts on your windshield. It creates a vacuum, which helps to remove air and impurities from the impact area before the resin is injected. Alternating vacuum and...

Reference: 994-N412

Brand: REPARBRISE

Injector for windshield repair resin injection for KIT-1320 - TER1 AND 2 - 2nd life - N412

In very good condition Only a few minor cosmetic defects - 1 Only one available 2nd LIFE warranty: 6 months Allows resin to be injected into impacts using a vacuum/pressure pump, ensuring precise and even application for high-quality repairs. Compatible with professional kits KIT-1320 and TERMINATOR 1 & 2, as well as with the vertical or inverted...

Reference: HOS-2002

Cleaning brush for injector 5069 or 5062

Nylon cleaning brush designed for 5069 or 5062 injectors. It allows you to remove excess windshield injection resin precisely and efficiently, ensuring perfect maintenance of your injectors for optimal performance during every repair.

Reference: TER-CHARGEUR

Brand: TERMINATOR

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits. Connect the charger to your TERMINATOR or ULTRAPOSE EVOLUTION to recharge the battery.

Reference: 5096

Brand: REPARBRISE

Large impact packer 5096 for 1330 and 1330SPECIAL kits

High-impact injector specially designed for kit ref. 1330 and kit ref. 1330SPECIAL. Ideal for repairing large impacts on windshields, this injector comes with a seal to ensure a perfect seal when injecting the resin. Not compatible with our old kit 1310.

Reference: HOS-2001

Nylon cleaning brush for HOS-2000 hose

Nylon cleaning brush specially designed for the HOS-2000 connection hose. It effectively removes excess resin used during windscreen repairs, ensuring optimal maintenance of your equipment and increased longevity of your connection hoses.

Reference: PMP-ADVANTAGE

Brand: REPAR'VIT

Vacuum-pressure pump for kit 1330SPECIAL and 1300

The vacuum-pressure pump is specially designed to facilitate the repair of impacts on your windshield. It creates a vacuum to suck out air and impurities from the impact area before the resin is injected. Thanks to alternating vacuum and pressure, this pump ensures uniform and controlled injection of the resin into the impact area, guaranteeing a...

Reference: PEZ-120

Anti-skid roof/hood liner

Protect the paintwork on your vehicle's roof or hood when you're working on it, with our non-slip protective canvas. Ideal for bodybuilders and garages, it offers a practical and safe solution for fitting tools, screws and small assembly equipment without the risk of damaging the vehicle's surface. Dimensions and weight : Dimensions: 1720 x 700 x 2 mm....

Reference: 996

Brand: REPARBRISE

1M hydraulic connection hose for 993 pump

Connection hose with female quick connector (on one side only), specially designed to fit only on the 993 vacuum pump and the 994 injector. This 1-meter hose ensures a secure and efficient connection for your windshield repair operations, facilitating resin suction and injection with perfect compatibility between your equipment.

Reference: 969-N374

Large probe for impact repair - 2nd LIFE - N374

In average condition Cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: TER-BATTERIE

Brand: TERMINATOR

Battery for Kit TERMINATOR 1 and 2 and ULTRAPOSE EVOLUTION

Battery for TERMINATOR 1 and 2 Kit and ULTRAPOSE EVOLUTION. You can recharge this battery directly on the TERMINATOR or ULTRAPOSE EVOLUTION, using our TER-CHARGEUR charger.

Reference: IFA-300

Infrared thermometer for glass temperature control

Discover our infrared thermometer, a quick and accurate tool for monitoring temperatures on your windscreen. Ideal for checking conditions before and after repairs, it ensures optimal and safe working conditions.

Reference: 969-N417

Large probe for impact repair - 2nd LIFE - N417

Very Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: 161

Brand: REPAREGLASS

Cigar lighter extension cable for battery

Extension cable for batteries. To put on the cigar lighter.

Reference: 994CLAP

Brand: REPAREGLASS

Plunger for Injector Inox 994

Valve for Stainless Steel 994 injector, specially designed for windscreen impact repairs. This replacement part ensures that your injector works properly by guaranteeing that the resin is injected into the impact area with precision and without leaks for an optimal repair.

Reference: RS-2030

Set of 5 special syringes for resin injection

The RS-2030 pack consists of 5 syringes and 3 needles, ideal for windshield repair professionals. Each syringe allows you to draw the injection resin directly from a bottle or pipette and then inject it precisely into the injector. You can also use them to plug drill holes or fill cracks in your automotive glass. A practical and economical set, designed...

Reference: 961

Brand: REPARBRISE

Thermometer strip for windshield

Discover our thermometer specially designed for taking the temperature of the windshield before intervention, with a measuring range of 8 to 34°C. This tool allows you to accurately measure the temperature of the glass before any operation, ensuring ideal conditions for efficient and safe repairs.

Reference: 539

Round UV screen Ø 9cm for deck 9620 - Impact protection

Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: 538

Large format U.V. screen 30 x 40 cm - Protects windshield impact

Large-format 30 x 40 cm UV screen to protect against ultra-violet light during repairs. Used by the bus and truck industry.