Brosse de nettoyage en nylon pour tuyau HOS-2000

Reference: 617

Cylinder vacuum nozzle

Cylinder vacuum nozzle. Removes air trapped in the impact. Supplied with specific hose without connection and a smaller diameter. (for use with the 3200 cylinder and 993 vacuum pump).

Reference: 645

Brand: REPARBRISE

12V carbide drill for impact drilling

12V carbide drill supplied with integrated chuck lock, for drilling the impact point on your windshield before injecting the resin. Use with our 934, 4509w and 701 carbide drills. This drill can also be used with a felt for polishing the impact after repair. 4M cable extension

Reference: FIX-5063-DESTOCK

Brand: REPAR'VIT

Aluminium screw for injection bridge 367

Aluminium screw for injection bridge 367, holds injectors 5095 and 5096 to the windshield to ensure a seal during resin injection.

Reference: 985

Vaccum plug for suction of impact impurities

Vaccum plug to remove impurities from the windshield impact. Diameter 3cm The Vaccum plug is used with the vacuum pump ref.993.

Reference: HOS-1000-T

2.50M vacuum pump connector hose for TERMINATOR 1 and 2 kits

Vacuum pump connector hose for TERMINATOR 1 and 2 kits - Ideal for repairing impacts on the Windshields of utility vehicles, trucks, buses, trams, etc....  Length: 2.50 M

Reference: 1110

Brand: REPAR'VIT

Pressure vacuum pump for REPAR'VIT 1330 kit

The pressure vacuum pump 1110 is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump will inject the resin uniformly into the impact.

Reference: 538

Large format U.V. screen 30 x 40 cm - Protects windshield impact

Large-format 30 x 40 cm UV screen to protect against ultra-violet light during repairs. Used by the bus and truck industry.

Reference: 524

Brand: REPARBRISE

24V/12V voltage transformers for buses and trucks

24V/12V voltage transformers for buses and trucks

Reference: 974

Special syringe for injecting resin to repair windshields

The syringe ref.974 will allow you to take the injection resin from inside the bottle or pipette and then inject it into the injector. You can also use the syringe to fill drill holes and cracks in your Windshield.

Reference: 818

Windshield heater for impact repair

The WINDSHIELD HEATER warms the repair area, usb powered, supplied with adapter + 5 thermometers Ref. 961 12v cigarette lighter and 220v mains, 2.5m cable, ideal for impact repairs, red or black depending on availability.

Reference: 994CLAP

Brand: REPAREGLASS

Plunger for Injector Inox 994

Inox 994 injector plunger for windshield impact repair

Reference: 994JOINT

Brand: REPAREGLASS

Seal for 994CLAP plunger for 994 injector

If you have problems with leaks on the top nozzle of the 994 injector, you will need to change the small black seal inside the 994CLAP plunger. Seal for 994CLAP plunger for 994 injector

Reference: 512

Miniature 220V/12V cigarette lighter voltage transformers

Miniature 220V/12V cigarette-lighter voltage transformers, for recharging equipment with a cigarette-lighter connector. Ex. UV lamp, drill, etc.

Reference: 5095

Brand: REPARBRISE

Standard injector 5095 for kit 1330 and 1330SPECIAL

Standard injector for kit ref.1330 and kit ref.1330SPECIAL. Supplied with seal, not compatible with our old 1310 kit.

Reference: 539

Round UV screen Ø 9cm for deck 9620 - Impact protection

Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: 770

Brand: REPARBRISE

Window / windshield cleaner 20L - Mosquito repellent -770

Eliminates traces of oil, insects and dust. Used in industry, cars and construction. For cleaning windshields, windows and outside mirrors. Sold in 20L drums Also available - 750ml aerosol - Ref.768 and 5L drum - Ref.769

Reference: 993

Brand: REPARBRISE

Pressure vacuum pump for REPAR'VIT Senior 1320 kit

Vacuum pump delivered with hose ref.996 (quick connector on injector side and direct connection on pump) The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump...

Reference: FLEXI-BLADE

Flexible silicone wiper blade for windows and bodywork

Flexible wiper blade made in silicone. Allow to ease the removal of the water from surface to be dried. Appliable on the glass and metal.

Reference: 3200

Brand: REPARBRISE

REPARBRISE Injector: Cylinder + piston for injection of windshield repair resin

REPAIR injector composed of a high quality cylinder + piston. Composed of 5 lips which allow an additional depression and a faster repair. Adapts to our injection bridges ref.51 and 9620. To avoid any leaks due to seal wear, we recommend that you also order the interchangeable end caps ref 3202 when purchasing the injector.

Reference: 161

Brand: REPAREGLASS

Cigar lighter extension cable for battery

Extension cable for batteries. To put on the cigar lighter.

Reference: SATELLITEDEPONT

Satellite for windshield crack repair kit

Satellite for 3200 injector for manual injection of crack resin to repair cracks in windscreens (including rubber and leg protection).

Reference: 946

Brand: REPARBRISE

Large impact windshield pit adapter

Warning: sold without seal, seal reference in stock 983 Adapter for repairing large impacts, it adapts to our 3200 and 994 injectors to enable you to repair large impacts on the windshield. It can be used with our 1320, 951 and TERMINATOR 1 and 2 kits.

Reference: 994

Brand: REPARBRISE

Injector for windshield repair resin for KIT-1320 - TERMINATOR 1 AND 2

Injector allowing you to inject windshield repair resin using a pressure vacuum pump. Used in KIT-1320 - TERMINATOR 1 AND 2, fits perfectly with our vertical or reversed windshield adaptor ref. ADAPT-PBV. It is suggested that you also order the injector to avoid leaks due to wear of the seal: - To replace the seal in contact with the windshield, use ref....

Reference: 3202

Brand: REPARBRISE

Exchangeable nozzles for REPARBRISE 3200 injector (pack of 5)

Exchangeable nozzles for REPARBRISE 3200 injector (pack of 5). When you repair a windshield impact, it's important that the injector has uniform sealing when the resin is injected. It is now essential to change the nozzle of the 3200 injector as soon as it becomes damaged.

Reference: 272

Crack spreader bar for windshield repairs

Crack spreader bar for windshield repairs. This tensioning bar helps to stabilise the crack during your repair.

Reference: LUNETTE1048

UV protection glasses

UV protection glasses It is absolutely essential to wear protective glasses during windshield repairs when using our LED UV lamps, for example our UV lamp 1048.

Reference: FIX-2044

Brand: REPAR'VIT

Metal resin injector for FIX-2001 injection bridge

Metal injector for windshield repair resin injection for FIX -2001 injection bridge

Reference: 983

Brand: REPARBRISE

Seals (X2) for large impact adapter 946

Seals (X2) for large impact adapter 946. It is important to change the seals regularly to ensure a good seal when injecting the Windshield Repair Resin.

Reference: 940

LED lighting mirror (glass)

LED lighted mirror (glass) for repairing windshield impacts, this mirror allows you to visualise the impact throughout its repair, it has LED lighting. Size. 6.5cm x 4cm

Reference: RS-2030

Pack of 5 special resin injection syringes for windshield repairs

Resin dispenser pack consisting of 5 syringes and 3 needles. The RS-2030 syringe lets you remove the injection resin from the bottle or pipette and inject it into the injector. You can also use the syringe to fill drill holes and cracks in your windscreen.