1330 ve 1330SPECIAL kitleri için 5096 yüksek etkili enjektör

Reference: ADAPT-PBV

Adapter for vertical or reverse glazing

ADAPTER FOR VERTICAL OR INVERTED GLAZING Truck, bus, tractor, public works, combine harvester type.... The adaptor enables repairs to be carried out on vertical windscreens with a negative tilt of up to 20°. For use with injector 994, our 9620 bridge for TERMINATOR 1 and 2 cases, and 1320. Not compatible with FIX-2001, 2000, 367 and 51 bridges, cannot be...

Reference: 974

Special syringe for injecting resin to repair windshields

The syringe ref.974 will allow you to take the injection resin from inside the bottle or pipette and then inject it into the injector. You can also use the syringe to fill drill holes and cracks in your Windshield.

Reference: ISHP-BIG

Joints pour adaptateur pare-brise ADAPT-PBV - Lot de 10

Reference: HOS-1000-T

2.50M vacuum pump connector hose for TERMINATOR 1 and 2 kits

Vacuum pump connector hose for TERMINATOR 1 and 2 kits - Ideal for repairing impacts on the Windshields of utility vehicles, trucks, buses, trams, etc....  Length: 2.50 M

Reference: 979

Brand: REPARBRISE

Special windshield repair light pen

Our 979 pen light provides a better view of the impact injection during the repair of your windshield.

Reference: PEZ-120

Anti-skid roof/hood liner

Protect the paintwork on your vehicle's roof or hood when you're working on it, with our non-slip protective canvas. Ideal for bodybuilders and garages, it offers a practical and safe solution for fitting tools, screws and small assembly equipment without the risk of damaging the vehicle's surface. Dimensions and weight : Dimensions: 1720 x 700 x 2 mm....

Reference: FIX-2025

Brand: REPAR'VIT

Replacement plunger piston for injection bridge and suction cup

Replacement piston for our bridges REF-2000, REF-367, REF-9620, and our suction cup REF-GEZ-543-1.

Reference: 645

Brand: REPARBRISE

12V carbide drill for impact drilling

12V carbide drill supplied with integrated chuck lock, for drilling the impact point on your windshield before injecting the resin. Use with our 934, 4509w and 701 carbide drills. This drill can also be used with a felt for polishing the impact after repair. 4M cable extension

Reference: HOS-2002

Cleaning brush for injector 5069 or 5062

Nylon cleaning brush for injector 5069 or 5062 to clean excess injection resin from the windscreen

Reference: FIX-2044

Brand: REPAR'VIT

Metal resin injector for FIX-2001 injection bridge

Metal injector for windshield repair resin injection for FIX -2001 injection bridge

Reference: 770

Brand: REPARBRISE

Window / windshield cleaner 20L - Mosquito repellent -770

Eliminates traces of oil, insects and dust. Used in industry, cars and construction. For cleaning windshields, windows and outside mirrors. Sold in 20L drums Also available - 750ml aerosol - Ref.768 and 5L drum - Ref.769

Reference: 945

Brand: REPARBRISE

Square mirror REPARBRISE (Plexiglass)

Reparbrise 945 Plexiglas square mirror for repairing windscreen impacts. This mirror allows you to view the impact throughout the repair process. Dimensions: 9.5cm x 9.5cm

Reference: FIX-5063-DESTOCK

Brand: REPAR'VIT

Aluminium screw for injection bridge 367

Aluminium screw for injection bridge 367, holds injectors 5095 and 5096 to the windshield to ensure a seal during resin injection.

Reference: PMP-ADVANTAGE

Brand: REPAR'VIT

Pressure vacuum pump for REPAR'VIT kit 1330SPECIAL and 1300

The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump will inject the resin uniformly into the impact.

Reference: 5095

Brand: REPARBRISE

Standard injector 5095 for kit 1330 and 1330SPECIAL

Standard injector for kit ref.1330 and kit ref.1330SPECIAL. Supplied with seal, not compatible with our old 1310 kit.

Reference: 3200

Brand: REPARBRISE

REPARBRISE Injector: Cylinder + piston for injection of windshield repair resin

REPAIR injector composed of a high quality cylinder + piston. Composed of 5 lips which allow an additional depression and a faster repair. Adapts to our injection bridges ref.51 and 9620. To avoid any leaks due to seal wear, we recommend that you also order the interchangeable end caps ref 3202 when purchasing the injector.

Reference: FIX-2005

Brand: REPAR'VIT

Large impact resin filler injector for REF -2000 bridge

Large impact resin filler injector for REF-2000 Ø 1.5 cm bridge.

Reference: RS-2030

Pack of 5 special resin injection syringes for windshield repairs

Resin dispenser pack consisting of 5 syringes and 3 needles. The RS-2030 syringe lets you remove the injection resin from the bottle or pipette and inject it into the injector. You can also use the syringe to fill drill holes and cracks in your windscreen.

Reference: 5BX-2016

Ø 0.9 cm Rubber seals for standard impact injector 5095 and FIX-2006

Ø 0.9 cm rubber seals for large impact injector 5095 and FIX-2006. It is important to change the seals regularly to ensure a good seal when injecting windshield repair resin. 1 bag of 5 pieces

Reference: 940

LED lighting mirror (glass)

LED lighted mirror (glass) for repairing windshield impacts, this mirror allows you to visualise the impact throughout its repair, it has LED lighting. Size. 6.5cm x 4cm

Reference: HOS-2010

Rubber Seals (x2) for HOS-2000, HOS-2000-L, HOS-1000-T vacuum pump hoses

Set of 2 replacement rubber seals for HOS-2000, HOS-2000-L and HOS-1000-T hose It is important to change the rubber seals frequently to ensure that the windshield repair resin is injected correctly. The rubber seal is situated inside the connector on your hose. If there is a leak in the hose, you can change the seal by using a wrench and unscrewing the...

Reference: HOS-2001

Nylon cleaning brush for HOS-2000 hose

Nylon cleaning brush for HOS-2000 connection hose, for cleaning excess windshield repair resin.

Reference: FLEXI-BLADE

Flexible silicone wiper blade for windows and bodywork

Flexible wiper blade made in silicone. Allow to ease the removal of the water from surface to be dried. Appliable on the glass and metal.

Reference: FIX-2006

Brand: REPAR'VIT

Standard resin filler injector for REF -2000 bridge

Standard resin filling chamber for REF-2000 bridge Ø 0,9 cm

Reference: LUNETTE1048

UV protection glasses

UV protection glasses It is absolutely essential to wear protective glasses during windshield repairs when using our LED UV lamps, for example our UV lamp 1048.

Reference: 994JOINT

Brand: REPAREGLASS

Seal for 994CLAP plunger for 994 injector

If you have problems with leaks on the top nozzle of the 994 injector, you will need to change the small black seal inside the 994CLAP plunger. Seal for 994CLAP plunger for 994 injector

Reference: SATELLITEDEPONT

Satellite for windshield crack repair kit

Satellite for 3200 injector for manual injection of crack resin to repair cracks in windscreens (including rubber and leg protection).

Reference: 5BX-02010

Rubber seals Ø 1.5 cm for large impact injector 5096 and FIX-2005

Ø 1.5 cm seals for large impact injector 5096 and FIX-2005. It is important to change the seals regularly to ensure a good seal when injecting windshield repair resin. 1 bag of 5 pieces

Reference: 977

Brand: REPARBRISE

Large format UV screen 30 x 20 cm - windshield impact protection

Large-format 30 x 20 cm UV screen to protect against ultra-violet light during repairs.

Reference: TER-BATTERIE

Brand: TERMINATOR

Battery for Kit TERMINATOR 1 and 2 and ULTRAPOSE EVOLUTION

Battery for TERMINATOR 1 and 2 Kit and ULTRAPOSE EVOLUTION. You can recharge this battery directly on the TERMINATOR or ULTRAPOSE EVOLUTION, using our TER-CHARGEUR charger.