REPAR'VIT® vakum/basınç pompalı ön cam onarım kiti

Reference: 921

Brand: REPARBRISE

Windshield injection resin ( Conforms to AFNOR NF n°X50210 & UTAC regulation n°43)

Compliant with AFNOR NF No. X50210 & UTAC Regulation No. 43 Discover our 921 injection resin, specially formulated for repairing windshield impacts. This high-quality resin offers exceptional adhesion, lasting transparency, and enhanced strength, ensuring discreet and reliable repairs that meet the professional requirements of the automotive...

Reference: 539-N41

Round UV screen Ø 9cm for deck 9620 - Impact protection - 2nd life

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: POSTER-TER2

Poster TERMINATOR 2 automatic windshield impact repair process 50 x 70 cm

Poster TERMINATOR2 automatic windshield impact repair process 50 x 70 cm Available for export only with a product order. No delivery possible on its own

Reference: LR1-2OZ

Brand: REPAREGLASS

REPAREGLASS ® Standard windshield finishing resin

The finishing resin for repairing impacts on windshields is an ideal solution for restoring the transparency and strength of your damaged automotive glass. This high-strength resin allows for effective impact repair, while maintaining a clear and solid finish. It is designed to provide a long-lasting repair, capable of withstanding the stresses of driving...

Reference: 1320LED

Brand: REPAR'VIT

Repar'vit® New Generation 1320 case with LED for windshield impact repair

REPAR'VIT® is used and listed by a large number of car manufacturers. Meets AFNOR NF n° X5021 and REACH standards. Discover our glazing repair kit, complete with all the tools and accessories you need to carry out quality repairs to your windscreen. Ideal for professionals.

Reference: TER-CHARGEUR

Brand: TERMINATOR

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits. Connect the charger to your TERMINATOR or ULTRAPOSE EVOLUTION to recharge the battery.

Reference: PORTE-CT

Adhesive sticker holder for car inspections - pack of 100

Adhesive sticker holder for neutral technical inspection Our sticker holders are completely self-adhesive over their entire surface. Pack of 100 sticker holders (75 x 75mm)

Reference: 974

Special syringe for injecting resin to repair windshields

The syringe ref. 974 is specially designed for repairing impacts on windshields. It allows you to easily remove the injection resin from a bottle or pipette and then inject it precisely into the injector. Versatile, it can also be used to fill drill holes or fill cracks in the glass. An essential tool for ensuring clean, fast, and effective repairs.

Reference: 946

Brand: REPARBRISE

Large impact windshield pit adapter

This adapter for large impacts is specially designed to fit our 3200 and 994 injectors, allowing you to repair large impacts on your windshield. It is compatible with the following kits: 1320, 951, TERMINATOR 1, and TERMINATOR 2. Please note: sold without seal. The seal reference is currently being restocked (ref. 983).

Reference: 1048-CABLEUSB

USB-C charger cable

This USB-C charging cable is compatible with our 818-220V and 818-12V chargers. It is specially designed to provide reliable and fast power to your repair equipment. It can be used with the following devices: 818 Windshield Heater 1048 LED UV Lamp LAMPE-3 LAMPE-F Headlamp

Reference: 524

Brand: REPARBRISE

24V/12V voltage transformers for buses and trucks

24V/12V voltage transformers for buses and trucks

Reference: 1046-N2

Brand: REPARBRISE

2nde Vie - Old generation UV lamp -12V- Special resin polymerisation - N2

12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: RAS Only aesthetic defects shown in the photos appear - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon...

Reference: 818

Windshield heater for impact repair

The WINDSHIELD HEATER warms the repair area, usb powered, supplied with adapter + 5 thermometers Ref. 961 12v cigarette lighter and 220v mains, 2.5m cable, ideal for impact repairs, red or black depending on availability.

Reference: FIX-5019

Brand: REPAREGLASS

Suction cup for Pont 2000, 367, 366, and GEZ-543-1

This replacement suction cup is specially designed to ensure reliable and stable attachment of your injection bridge during windshield repairs. It is compatible with several bridge models: Ref. 2000, for flat windshields (buses, trucks) Ref. 367, included in the REPAR'VIT® ref. 1330 and 1330SPECIAL kits Suction cup ref. GEZ-543-1 Designed to provide...

Reference: 1414-V2

Brand: REPARBRISE

Cleaning kit for old windshield impacts

The old impact cleaning kit is specially designed to treat dirty impacts on windshields before repair. It removes residue, dust, and impurities that prevent the resin from adhering properly. Thanks to its professional components, it provides deep cleaning to optimize the adhesion and durability of the repair. Advantages: Removes stubborn dirt from old...

Reference: 768

Foam window / windshield cleaner 768 - Mosquito repellent

Effectively remove traces of oil, insects and dust with the foam-based 768 glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...

Reference: 1046-N81

Brand: REPARBRISE

2nde Vie - Old generation UV lamp -12V- Special resin polymerisation - N81

12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: N/A This lamp has numerous scratches and signs of wear, as shown in the photos - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important...

Reference: 1048-N248

Brand: REPARBRISE

LED Light lamp ULTRA FAST CURING - Second Life - N248

General operation: RAS Good condition - 1 Only one available Second Life warranty: 6 months Our new polymerisation lamp will save you a lot of time.... A whole lot of time! The resin will polymerise in just 50 seconds! Normally, with a traditional UV lamp, it takes 10 to 15 minutes to cure! But that's all over now! Thanks to our new REF-1048 LED UV lamp,...

Reference: 1048-N178

Brand: REPARBRISE

LED Light lamp ULTRA FAST CURING - Second Life - N178

General operation: RAS Very good condition - 1 Only one available Second Life warranty: 6 months Our new polymerisation lamp will save you a lot of time.... A whole lot of time! The resin will polymerise in just 50 seconds! Normally, with a traditional UV lamp, it takes 10 to 15 minutes to cure! But that's all over now! Thanks to our new REF-1048 LED UV...

Reference: 439

Brand: REPAREGLASS

Circular windshield impact protection stickers (customisable) - 100 pack

Round sticker Ø 3cm pack of 100 to personalise For impacted windshield, your customer has an impact and you can't repair it immediately. Protect the impact with our protective sticker for a few days, to avoid impurities in the windscreen. The round self-adhesive patch protects the impact. It protects it from moisture and impurities before the repair is...

Reference: KIT-FENTES-RPB

Brand: REPARBRISE

Specific repair kit for cracks

Repair cracks effectively and avoid replacing the windshield! This complete kit is specially designed for the professional repair of cracks in windshields, particularly those found on heavy trucks, buses, and utility vehicles. It contains all the tools and products needed to permanently repair even the most complex cracks and ensure a high-quality...

Reference: 539

Round UV screen Ø 9cm for deck 9620 - Impact protection

Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: 5BX-2016

Ø 0.9 cm Rubber seals for standard impact injector 5095 and FIX-2006

Ø 0.9 cm rubber seals for large impact injector 5095 and FIX-2006. It is important to change the seals regularly to ensure a good seal when injecting windshield repair resin. 1 bag of 5 pieces

Reference: 926

Brand: REPARBRISE

Roll of special plastic film for repairing cracks and fissures

Our flexible plastic film is specially designed for surface drying of resin when repairing cracks and fissures on windshields. Simply place the film over the applied resin, then use a UV lamp to ensure optimal polymerization. Ideal for keeping the resin in place during drying, this film guarantees a clean and effective finish. Caution: not compatible with...

Reference: 995

Brand: REPARBRISE

Seal for Injector 994 - windshield impact repair

Injector seal 994 provides a homogeneous seal for resin injection into the impact during windshield repair. 1. Homogeneous seal for precise injection Optimised sealing quality: This injector seal 994 provides a perfect seal, guaranteeing uniform and precise injection of the resin into the impact. This results in more effective and higher-quality...

Reference: KIT-TERMINATOR-MAXI

Brand: TERMINATOR

TERMINATOR: AUTOMATIC WINDSHIELD REPAIR SYSTEM

VOTED EQUIPMENT OF THE YEAR 2017: Read the article VBSA REVOLUTIONISES WINDSHIELD REPAIR  The TERMINATOR motorised windscreen repair kit is an injection process with a motor. It is so intuitive that even someone who doesn't repair windscreens on a daily basis is able to carry out perfect repairs. The operator no longer has to stand in front of the impact...

Reference: 4509W

Brand: REPARBRISE

Half-ball drill bit - crack/slot and impact

Discover our half-ball drill bit, specially designed for precise drilling of cracks, splits, and impacts on windshields. Its specific shape allows for effective work at the end of a crack or at the point of impact, stopping its progression and ensuring a long-lasting repair. Made from high-quality materials, this drill bit offers high drilling precision...

Reference: HOS-2001

Nylon cleaning brush for HOS-2000 hose

Nylon cleaning brush specially designed for the HOS-2000 connection hose. It effectively removes excess resin used during windscreen repairs, ensuring optimal maintenance of your equipment and increased longevity of your connection hoses.

Reference: 5095-N377

Brand: REPARBRISE

Standard Injector 5095 for kit 1330 and 1330SPECIAL - 2nd life

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Standard injector designed for windshield repair kits ref. 1330 and 1330SPECIAL. This injector ensures precise resin injection for common impacts. It comes with a seal to guarantee a perfect seal during repair. Not compatible with the old kit...

Reference: 10357

Rechargeable battery-powered 7.2V carbide drill for impact drilling

Rechargeable 7.2V carbide drill, supplied with battery and charger, specially designed for drilling the impact point on your windscreen before injecting the resin. It is used with our 934, 4509w and 701 drill bits, ensuring precision and efficiency. This drill is also compatible with the polishing felt (ref. 971) for a perfect finish after repair....