5096 ve FIX-2005 yüksek etkili enjektörler için Ø 1,5 cm contalar

Reference: 3200

Brand: REPARBRISE

Cylinder + piston for injection of windshield repair resin

Composed of 5 lips, it allows for greater vacuum and therefore faster repair of impacts on windshields. This cylinder + piston is compatible with injection bridges ref. 51 and 9620, as well as with tube ref. 996. To ensure optimal sealing and prevent any leaks due to wear on the seal, it is strongly recommended to order the interchangeable end caps ref....

Reference: 645

Brand: REPARBRISE

12V carbide drill for drilling impact points

12V carbide drill supplied with built-in chuck lock, specially designed for drilling the impact point on your windscreen before injecting the resin. It is used with our 934, 4509w and 701 drill bits to ensure precise and efficient drilling. This drill is also ideal with a felt pad for polishing the impact after repair, giving a neat finish. It is...

Reference: 512

Miniature 220V/12V cigarette lighter voltage transformers

Miniature 220V/12V cigarette-lighter voltage transformers, for recharging equipment with a cigarette-lighter connector. Ex. UV lamp, drill, etc.

Reference: HOS-2000

1M connector hose for 1110 pump and PMP-ADVANTAGE

Discover our specially designed connection hose for the 1110 vacuum pump and the PMP-ADVANTAGE, as well as for the 5095 or 5096 injectors used for windscreen repairs. With a length of 1 meter, it provides a reliable and convenient connection between your pump and the injector, making your work easier and ensuring optimal use of your equipment.

Reference: FIX-5035

Brand: REPAREGLASS

Plastic screw for FIX-2001 injection bridge

Plastic screw designed for the FIX-2001 injection bridge, it allows precise adjustment of the bridge to achieve uniform sealing when injecting resin for windshield repair.

Reference: DPG

Vacuum pump calibration tester for windshield repair

It's imperative to test the calibration of your vacuum pump at minimum once a year, to ensure quality repairs for your customers. French Standard regulation NF R61-980... Frequency of use: once a year. This new regulation allows to ensure that the pressure and vaccum cycles made from the pump are correct ( Pressure tolerance is 0,1 Bar) in order to avoid...

Reference: 499

Cigar-lighter multi-socket box

Cigar-lighter power strip. Allows you to recharge appliances such as UV lamps, drills, hoovers, etc. Ideal for buses and trucks.

Reference: 3202

Brand: REPARBRISE

Exchangeable nozzles for REPARBRISE 3200 injector (pack of 5)

This set of 5 interchangeable tips is specially designed for the REPARBRISE 3200 injector. When repairing windshields, uniform sealing is essential to ensure effective injection of the resin without leakage. That is why it is recommended to replace the nozzle tip of the 3200 injector as soon as it shows signs of wear. These nozzle tips ensure optimal...

Reference: 539

Round UV screen Ø 9cm for deck 9620 - Impact protection

Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: TER-BATTERIE

Brand: TERMINATOR

Battery for Kit TERMINATOR 1 and 2 and ULTRAPOSE EVOLUTION

Battery for TERMINATOR 1 and 2 Kit and ULTRAPOSE EVOLUTION. You can recharge this battery directly on the TERMINATOR or ULTRAPOSE EVOLUTION, using our TER-CHARGEUR charger.

Reference: 1110-N357

Brand: REPAR'VIT

Vacuum-pressure pump for REPAR'VIT 1330 kit - 2nd life

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months The 1110 vacuum-pressure pump is specially designed to facilitate the repair of impacts on your windshield. It creates a vacuum, which helps to remove air and impurities from the impact area before the resin is injected. Alternating vacuum and...

Reference: FLEXI-BLADE

Flexible silicone wiper blade for windows and bodywork

Flexible wiper blade made in silicone. Allow to ease the removal of the water from surface to be dried. Appliable on the glass and metal.

Reference: ADAPT-PBV

Adapter for vertical or reverse glazing

ADAPTER FOR VERTICAL OR INVERTED GLAZING Truck, bus, tractor, public works, combine harvester type.... The adaptor enables repairs to be carried out on vertical windscreens with a negative tilt of up to 20°. For use with injector 994, our 9620 bridge for TERMINATOR 1 and 2 cases, and 1320. Not compatible with FIX-2001, 2000, 367 and 51 bridges, cannot be...

Reference: 539-N40

Round UV screen Ø 9cm for deck 9620 - Impact protection - 2nd life

In average condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: 979-N415

Brand: REPARBRISE

Special windshield repair light pen -Second life - N415

Very Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The Penlight 979 is designed to improve visibility during windshield impact repairs. Thanks to its precise lighting, it allows you to follow the resin injection in detail, ensuring optimal control at every stage of the...

Reference: LUNETTE1048

UV protection glasses

When repairing windscreens, it is essential to wear UV protection goggles, especially when using UV LED lamps, such as our UV lamp 1048. These goggles provide optimal protection against ultraviolet rays, thus reducing the risks to the eyes and guaranteeing maximum safety. Characteristics: - Anti-UV filtration: Effective protection against UV exposure -...

Reference: FIX-2044

Brand: REPAR'VIT

Metal resin injector for FIX-2001 injection bridge

Metal injector specially designed for injecting windshield repair resin with the FIX-2001 injection bridge. Robust and precise, this injector allows for efficient distribution of the resin to ensure reliable and durable repairs to your automotive glass.

Reference: HOS-2010

Rubber Seals (x2) for HOS-2000, HOS-2000-L, HOS-1000-T vacuum pump hoses

Set of 2 replacement seals compatible with HOS-2000, HOS-2000-L, and HOS-1000-T hoses, used with a vacuum pump for windshield repair. It is essential to replace the seals regularly to ensure optimal injection of the resin and prevent any leaks during the repair. The gasket is located inside the hose fittings. In the event of a leak, simply unscrew the...

Reference: 993-N414

Brand: REPARBRISE

Pressure vacuum pump for REPAR'VIT Senior 1320 kit - -2nd LIFE - N414

Pump in good condition. Only a few cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Vacuum pump delivered with hose ref.996 (quick connector on injector side and direct connection on pump) The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air...

Reference: PMP-ADVANTAGE

Brand: REPAR'VIT

Vacuum-pressure pump for kit 1330SPECIAL and 1300

The vacuum-pressure pump is specially designed to facilitate the repair of impacts on your windshield. It creates a vacuum to suck out air and impurities from the impact area before the resin is injected. Thanks to alternating vacuum and pressure, this pump ensures uniform and controlled injection of the resin into the impact area, guaranteeing a...

Reference: HOS-2002

Cleaning brush for injector 5069 or 5062

Nylon cleaning brush designed for 5069 or 5062 injectors. It allows you to remove excess windshield injection resin precisely and efficiently, ensuring perfect maintenance of your injectors for optimal performance during every repair.

Reference: 226

Ball for making impacts

The impact ball is an essential tool for training in windshield repair. Specially designed to create realistic impacts on a test windshield, it is ideal for: Training new technicians Practical exercises in training centers Your own training sessions A simple and effective tool for reproducing real-life situations and perfecting repair techniques before...

Reference: 969-N368

Large probe for impact repair - 2nd LIFE - N368

Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: 979

Brand: REPARBRISE

Special windshield repair light pen

The Penlight 979 is designed to improve visibility during windshield impact repairs. Thanks to its precise lighting, it allows you to follow the resin injection in detail, ensuring optimal control at every stage of the process. An essential tool for meticulous and professional repairs.

Reference: 946

Brand: REPARBRISE

Large impact windshield pit adapter

This adapter for large impacts is specially designed to fit our 3200 and 994 injectors, allowing you to repair large impacts on your windshield. It is compatible with the following kits: 1320, 951, TERMINATOR 1, and TERMINATOR 2. Please note: sold without seal. The seal reference is currently being restocked (ref. 983).

Reference: TER-CHARGEUR

Brand: TERMINATOR

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits. Connect the charger to your TERMINATOR or ULTRAPOSE EVOLUTION to recharge the battery.

Reference: 994CLAP

Brand: REPAREGLASS

Plunger for Injector Inox 994

Valve for Stainless Steel 994 injector, specially designed for windscreen impact repairs. This replacement part ensures that your injector works properly by guaranteeing that the resin is injected into the impact area with precision and without leaks for an optimal repair.

Reference: 940

LED lighting mirror (glass)

Designed to facilitate windshield repairs, this glass mirror with integrated LED lighting allows you to see the impact perfectly throughout the repair. Its compact size and targeted brightness ensure excellent visibility, even in poorly lit areas.

Reference: IFA-300

Infrared thermometer for glass temperature control

Discover our infrared thermometer, a quick and accurate tool for monitoring temperatures on your windscreen. Ideal for checking conditions before and after repairs, it ensures optimal and safe working conditions.

Reference: ISHP-BIG

Seals for ADAPT-PBV windshield adapter - Set of 10

Set of 10 seals specially designed for the ADAPT-PBV windshield adapter. Not compatible with the 994 injector (TERMINATOR kit and REPARVIT Senior kit). These seals ensure a perfect seal during resin injection, which is essential for guaranteeing a clean and effective repair of windshield impacts. It is recommended to replace worn seals regularly to...