Standart darbeli enjektör 5095 ve FIX-2006 için Ø 0,9 cm contalar

Reference: 272

Spreader bar for windshield crack repairs

This tension bar is specially designed to hold the crack in place during repair and provides optimal adhesion throughout the process. Ideal for professionals and specialized workshops, this product allows for careful and safe work on cracks or chips in the windshield.

Reference: 1110-N357

Brand: REPAR'VIT

Vacuum-pressure pump for REPAR'VIT 1330 kit - 2nd life

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months The 1110 vacuum-pressure pump is specially designed to facilitate the repair of impacts on your windshield. It creates a vacuum, which helps to remove air and impurities from the impact area before the resin is injected. Alternating vacuum and...

Reference: 539-N39

Round UV screen Ø 9cm for deck 9620 - Impact protection - 2nd life

In average condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: 961

Brand: REPARBRISE

Thermometer strip for windshield

Discover our thermometer specially designed for taking the temperature of the windshield before intervention, with a measuring range of 8 to 34°C. This tool allows you to accurately measure the temperature of the glass before any operation, ensuring ideal conditions for efficient and safe repairs.

Reference: ADAPT-PBV

Adapter for vertical or reverse glazing

ADAPTER FOR VERTICAL OR INVERTED GLAZING Truck, bus, tractor, public works, combine harvester type.... The adaptor enables repairs to be carried out on vertical windscreens with a negative tilt of up to 20°. For use with injector 994, our 9620 bridge for TERMINATOR 1 and 2 cases, and 1320. Not compatible with FIX-2001, 2000, 367 and 51 bridges, cannot be...

Reference: 539

Round UV screen Ø 9cm for deck 9620 - Impact protection

Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: 969-N373

Large probe for impact repair - 2nd LIFE - N373

In average condition Cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: 996

Brand: REPARBRISE

1M hydraulic connection hose for 993 pump

Connection hose with female quick connector (on one side only), specially designed to fit only on the 993 vacuum pump and the 994 injector. This 1-meter hose ensures a secure and efficient connection for your windshield repair operations, facilitating resin suction and injection with perfect compatibility between your equipment.

Reference: 538

Large format U.V. screen 30 x 40 cm - Protects windshield impact

Large-format 30 x 40 cm UV screen to protect against ultra-violet light during repairs. Used by the bus and truck industry.

Reference: 994CLAP

Brand: REPAREGLASS

Plunger for Injector Inox 994

Valve for Stainless Steel 994 injector, specially designed for windscreen impact repairs. This replacement part ensures that your injector works properly by guaranteeing that the resin is injected into the impact area with precision and without leaks for an optimal repair.

Reference: 993-N413

Brand: REPARBRISE

Pressure vacuum pump for REPAR'VIT Senior 1320 kit - -2nd LIFE - N413

Pump in very good condition. Only a few cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Vacuum pump delivered with hose ref.996 (quick connector on injector side and direct connection on pump) The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air...

Reference: FIX-2044

Brand: REPAR'VIT

Metal resin injector for FIX-2001 injection bridge

Metal injector specially designed for injecting windshield repair resin with the FIX-2001 injection bridge. Robust and precise, this injector allows for efficient distribution of the resin to ensure reliable and durable repairs to your automotive glass.

Reference: 769

Window / windshield cleaner 5L - Mosquito repellent -769

Effectively remove traces of oil, insects and dust with 769 foam-based glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...

Reference: FIX-2006

Brand: REPAR'VIT

Standard resin filler injector for REF -2000 bridge

Standard resin filling chamber specially designed for the REF-2000 injection bridge. It allows for efficient and controlled injection of resin during windshield repairs. Compatible with hose 996 Diameter: 0.9 cm.

Reference: 5BX-02010

Rubber seals Ø 1.5 cm for large impact injector 5096 and FIX-2005

Pack of 5 seals, Ø 1.5 cm, compatible with 5096 and FIX-2005 heavy-duty impact injectors, specially designed for repairing windshield impacts. It is essential to replace the seals regularly to ensure a perfect seal when injecting the resin, thus guaranteeing a reliable and durable repair.

Reference: 3200

Brand: REPARBRISE

Cylinder + piston for injection of windshield repair resin

Composed of 5 lips, it allows for greater vacuum and therefore faster repair of impacts on windshields. This cylinder + piston is compatible with injection bridges ref. 51 and 9620, as well as with tube ref. 996. To ensure optimal sealing and prevent any leaks due to wear on the seal, it is strongly recommended to order the interchangeable end caps ref....

Reference: FIX-5063-DESTOCK

Brand: REPAR'VIT

Aluminium screw for injection bridge 367

The aluminum screw for injection bridge 367 is specially designed to secure injectors 5095 and 5096 to the windshield. This screw guarantees perfect sealing during resin injection, which is essential for effective and long-lasting impact repairs. Made from high-quality aluminum, it offers strength and reliability for your windshield repairs.

Reference: HOS-2000-L

2.50M long connector hose for Bus and Truck for 1110 and PMP-ADVANTAGE pumps

Discover our long connection hose specially designed for buses, trucks, utility vehicles, trams, etc. Compatible with the 1110 vacuum pumps and PMP-ADVANTAGE, as well as our 5095 and 5096 injectors, it offers you an ideal range for large windows. Used in our 1330 and 1330SPECIAL kits, it is not compatible with our 1320 and TERMINATOR 1 and 2 kits. Length:...

Reference: 974

Special syringe for injecting resin to repair windshields

The syringe ref. 974 is specially designed for repairing impacts on windshields. It allows you to easily remove the injection resin from a bottle or pipette and then inject it precisely into the injector. Versatile, it can also be used to fill drill holes or fill cracks in the glass. An essential tool for ensuring clean, fast, and effective repairs.

Reference: IFA-300

Infrared thermometer for glass temperature control

Discover our infrared thermometer, a quick and accurate tool for monitoring temperatures on your windscreen. Ideal for checking conditions before and after repairs, it ensures optimal and safe working conditions.

Reference: 979

Brand: REPARBRISE

Special windshield repair light pen

The Penlight 979 is designed to improve visibility during windshield impact repairs. Thanks to its precise lighting, it allows you to follow the resin injection in detail, ensuring optimal control at every stage of the process. An essential tool for meticulous and professional repairs.

Reference: 969-N417

Large probe for impact repair - 2nd LIFE - N417

Very Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: TER-BATTERIE

Brand: TERMINATOR

Battery for Kit TERMINATOR 1 and 2 and ULTRAPOSE EVOLUTION

Battery for TERMINATOR 1 and 2 Kit and ULTRAPOSE EVOLUTION. You can recharge this battery directly on the TERMINATOR or ULTRAPOSE EVOLUTION, using our TER-CHARGEUR charger.

Reference: LUNETTE1048

UV protection glasses

When repairing windscreens, it is essential to wear UV protection goggles, especially when using UV LED lamps, such as our UV lamp 1048. These goggles provide optimal protection against ultraviolet rays, thus reducing the risks to the eyes and guaranteeing maximum safety. Characteristics: - Anti-UV filtration: Effective protection against UV exposure -...

Reference: 959

Brand: REPARBRISE

Carbide tip pen for removal of impurities from windshield impact

The carbide-tipped pen is the ideal tool for effectively preparing an impact area prior to repair. It allows you to precisely remove surface impurities, ensuring optimal resin adhesion and a long-lasting repair. Essential for guaranteeing a clean, professional finish on damaged windshields.

Reference: 770

Window / windshield cleaner 20L - Mosquito repellent -770

Effectively remove traces of oil, insects and dust with the foam-based 770 glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...

Reference: 226

Ball for making impacts

The impact ball is an essential tool for training in windshield repair. Specially designed to create realistic impacts on a test windshield, it is ideal for: Training new technicians Practical exercises in training centers Your own training sessions A simple and effective tool for reproducing real-life situations and perfecting repair techniques before...

Reference: 977

Brand: REPARBRISE

Large format UV screen 30 x 20 cm - windshield impact protection

Large-format 30 x 20 cm UV screen to protect against ultra-violet light during repairs.

Reference: FIX-5035

Brand: REPAREGLASS

Plastic screw for FIX-2001 injection bridge

Plastic screw designed for the FIX-2001 injection bridge, it allows precise adjustment of the bridge to achieve uniform sealing when injecting resin for windshield repair.

Reference: 645

Brand: REPARBRISE

12V USB-C Rechargeable Carbide Drill with Universal Chuck

his new 12V rechargeable carbide drill is an essential tool for professional windshield repair technicians. Designed for the precise drilling of impact points before resin injection, it helps optimize repair preparation and improve resin penetration into the impact area. It is supplied with a universal chuck and is ideally used with the following drill...