9620 model güverte için Ø 9 cm yuvarlak UV ekran - Darbe koruması - İkinci hayat

Reference: 994CLAP

Brand: REPAREGLASS

Plunger for Injector Inox 994

Valve for Stainless Steel 994 injector, specially designed for windscreen impact repairs. This replacement part ensures that your injector works properly by guaranteeing that the resin is injected into the impact area with precision and without leaks for an optimal repair.

Reference: HOS-2001

Nylon cleaning brush for HOS-2000 hose

Nylon cleaning brush specially designed for the HOS-2000 connection hose. It effectively removes excess resin used during windscreen repairs, ensuring optimal maintenance of your equipment and increased longevity of your connection hoses.

Reference: FIX-2005

Brand: REPAR'VIT

Large impact resin filler injector for REF -2000 bridge

High-impact resin filling injector specially designed for the REF-2000 injection bridge. Allows resin to be injected optimally into major impacts on windshields, ensuring high-quality repairs and good coverage of the damaged area. Compatible with the 996 hose Ø 1.5 cm.

Reference: LP10

Magnifying glass (15x zoom) for viewing windshield impact damage

Plastic magnifying glass (15x zoom) with transparent base. Excellent tool for identifying the type of impact, but also for viewing the impurities contained within it.

Reference: HOS-2002

Cleaning brush for injector 5069 or 5062

Nylon cleaning brush designed for 5069 or 5062 injectors. It allows you to remove excess windshield injection resin precisely and efficiently, ensuring perfect maintenance of your injectors for optimal performance during every repair.

Reference: 3200

Brand: REPARBRISE

Cylinder + piston for injection of windshield repair resin

Composed of 5 lips, it allows for greater vacuum and therefore faster repair of impacts on windshields. This cylinder + piston is compatible with injection bridges ref. 51 and 9620, as well as with tube ref. 996. To ensure optimal sealing and prevent any leaks due to wear on the seal, it is strongly recommended to order the interchangeable end caps ref....

Reference: PEZ-120

Anti-skid roof/hood liner

Protect the paintwork on your vehicle's roof or hood when you're working on it, with our non-slip protective canvas. Ideal for bodybuilders and garages, it offers a practical and safe solution for fitting tools, screws and small assembly equipment without the risk of damaging the vehicle's surface. Dimensions and weight : Dimensions: 1720 x 700 x 2 mm....

Reference: DPG

Vacuum pump calibration tester for windshield repair

It's imperative to test the calibration of your vacuum pump at minimum once a year, to ensure quality repairs for your customers. French Standard regulation NF R61-980... Frequency of use: once a year. This new regulation allows to ensure that the pressure and vaccum cycles made from the pump are correct ( Pressure tolerance is 0,1 Bar) in order to avoid...

Reference: 969-N375

Large probe for impact repair - 2nd LIFE - N375

Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: 10357

Rechargeable battery-powered 7.2V carbide drill for impact drilling

Rechargeable 7.2V carbide drill, supplied with battery and charger, specially designed for drilling the impact point on your windscreen before injecting the resin. It is used with our 934, 4509w and 701 drill bits, ensuring precision and efficiency. This drill is also compatible with the polishing felt (ref. 971) for a perfect finish after repair....

Reference: 946

Brand: REPARBRISE

Large impact windshield pit adapter

This adapter for large impacts is specially designed to fit our 3200 and 994 injectors, allowing you to repair large impacts on your windshield. It is compatible with the following kits: 1320, 951, TERMINATOR 1, and TERMINATOR 2. Please note: sold without seal. The seal reference is currently being restocked (ref. 983).

Reference: 770

Window / windshield cleaner 20L - Mosquito repellent -770

Effectively remove traces of oil, insects and dust with the foam-based 770 glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...

Reference: PMP-ADVANTAGE

Brand: REPAR'VIT

Vacuum-pressure pump for kit 1330SPECIAL and 1300

The vacuum-pressure pump is specially designed to facilitate the repair of impacts on your windshield. It creates a vacuum to suck out air and impurities from the impact area before the resin is injected. Thanks to alternating vacuum and pressure, this pump ensures uniform and controlled injection of the resin into the impact area, guaranteeing a...

Reference: 977

Brand: REPARBRISE

Large format UV screen 30 x 20 cm - windshield impact protection

Large-format 30 x 20 cm UV screen to protect against ultra-violet light during repairs.

Reference: FIX-2044

Brand: REPAR'VIT

Metal resin injector for FIX-2001 injection bridge

Metal injector specially designed for injecting windshield repair resin with the FIX-2001 injection bridge. Robust and precise, this injector allows for efficient distribution of the resin to ensure reliable and durable repairs to your automotive glass.

Reference: 979-N415

Brand: REPARBRISE

Special windshield repair light pen -Second life - N415

Very Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The Penlight 979 is designed to improve visibility during windshield impact repairs. Thanks to its precise lighting, it allows you to follow the resin injection in detail, ensuring optimal control at every stage of the...

Reference: 539-N41

Round UV screen Ø 9cm for deck 9620 - Impact protection - 2nd life

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: 539

Round UV screen Ø 9cm for deck 9620 - Impact protection

Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: 994-N412

Brand: REPARBRISE

Injector for windshield repair resin injection for KIT-1320 - TER1 AND 2 - 2nd life - N412

In very good condition Only a few minor cosmetic defects - 1 Only one available 2nd LIFE warranty: 6 months Allows resin to be injected into impacts using a vacuum/pressure pump, ensuring precise and even application for high-quality repairs. Compatible with professional kits KIT-1320 and TERMINATOR 1 & 2, as well as with the vertical or inverted...

Reference: ADAPT-PBV

Adapter for vertical or reverse glazing

ADAPTER FOR VERTICAL OR INVERTED GLAZING Truck, bus, tractor, public works, combine harvester type.... The adaptor enables repairs to be carried out on vertical windscreens with a negative tilt of up to 20°. For use with injector 994, our 9620 bridge for TERMINATOR 1 and 2 cases, and 1320. Not compatible with FIX-2001, 2000, 367 and 51 bridges, cannot be...

Reference: 818

Windshield heater for impact repair

The WINDSHIELD HEATER warms the repair area, usb powered, supplied with adapter + 5 thermometers Ref. 961 12v cigarette lighter and 220v mains, 2.5m cable, ideal for impact repairs, red or black depending on availability.

Reference: 974

Special syringe for injecting resin to repair windshields

The syringe ref. 974 is specially designed for repairing impacts on windshields. It allows you to easily remove the injection resin from a bottle or pipette and then inject it precisely into the injector. Versatile, it can also be used to fill drill holes or fill cracks in the glass. An essential tool for ensuring clean, fast, and effective repairs.

Reference: ISHP-BIG

Seals for ADAPT-PBV windshield adapter - Set of 10

Set of 10 seals specially designed for the ADAPT-PBV windshield adapter. Not compatible with the 994 injector (TERMINATOR kit and REPARVIT Senior kit). These seals ensure a perfect seal during resin injection, which is essential for guaranteeing a clean and effective repair of windshield impacts. It is recommended to replace worn seals regularly to...

Reference: 945

Brand: REPARBRISE

Plexiglas mirror

The REPARBRISE 945 mirror, made of high-quality plexiglass, is designed to monitor the progress of windshield impact repairs in real time. Placed inside the vehicle, it provides a clear and continuous view of the impact throughout the repair process, ensuring precise and careful work.

Reference: 272

Spreader bar for windshield crack repairs

This tension bar is specially designed to hold the crack in place during repair and provides optimal adhesion throughout the process. Ideal for professionals and specialized workshops, this product allows for careful and safe work on cracks or chips in the windshield.

Reference: 5BX-2016

Ø 0.9 cm Rubber seals for standard impact injector 5095 and FIX-2006

Ø 0.9 cm rubber seals for large impact injector 5095 and FIX-2006. It is important to change the seals regularly to ensure a good seal when injecting windshield repair resin. 1 bag of 5 pieces

Reference: 768

Foam window / windshield cleaner 768 - Mosquito repellent

Effectively remove traces of oil, insects and dust with the foam-based 768 glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...

Reference: 961

Brand: REPARBRISE

Thermometer strip for windshield

Discover our thermometer specially designed for taking the temperature of the windshield before intervention, with a measuring range of 8 to 34°C. This tool allows you to accurately measure the temperature of the glass before any operation, ensuring ideal conditions for efficient and safe repairs.

Reference: HOS-1000-T

2.50M vacuum pump connector hose for TERMINATOR 1 and 2 kits

Connection hose for vacuum pump, specially designed for the TERMINATOR 1 and 2 kits. This hose allows you to repair impacts on windscreens of commercial vehicles, trucks, buses, trams, and other vehicles requiring a long reach. Its length of 2.50 m offers optimal flexibility to easily reach repair areas, even on large windows.

Reference: 969

Long probe for impact repair

The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for efficient and controlled repairs.