KIT-1320 - TERMINATOR 1 VE 2 için ön cam onarım reçinesi enjektörü

Reference: 1110-N357

Brand: REPAR'VIT

Vacuum-pressure pump for REPAR'VIT 1330 kit - 2nd life

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months The 1110 vacuum-pressure pump is specially designed to facilitate the repair of impacts on your windshield. It creates a vacuum, which helps to remove air and impurities from the impact area before the resin is injected. Alternating vacuum and...

Reference: PMP-ADVANTAGE

Brand: REPAR'VIT

Vacuum-pressure pump for kit 1330SPECIAL and 1300

The vacuum-pressure pump is specially designed to facilitate the repair of impacts on your windshield. It creates a vacuum to suck out air and impurities from the impact area before the resin is injected. Thanks to alternating vacuum and pressure, this pump ensures uniform and controlled injection of the resin into the impact area, guaranteeing a...

Reference: LP10

Magnifying glass (15x zoom) for viewing windshield impact damage

Plastic magnifying glass (15x zoom) with transparent base. Excellent tool for identifying the type of impact, but also for viewing the impurities contained within it.

Reference: 969-N370

Large probe for impact repair - 2nd LIFE - N370

Very Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: 5BX-02010

Rubber seals Ø 1.5 cm for large impact injector 5096 and FIX-2005

Pack of 5 seals, Ø 1.5 cm, compatible with 5096 and FIX-2005 heavy-duty impact injectors, specially designed for repairing windshield impacts. It is essential to replace the seals regularly to ensure a perfect seal when injecting the resin, thus guaranteeing a reliable and durable repair.

Reference: RS-2030

Set of 5 special syringes for resin injection

The RS-2030 pack consists of 5 syringes and 3 needles, ideal for windshield repair professionals. Each syringe allows you to draw the injection resin directly from a bottle or pipette and then inject it precisely into the injector. You can also use them to plug drill holes or fill cracks in your automotive glass. A practical and economical set, designed...

Reference: 10357

Rechargeable battery-powered 7.2V carbide drill for impact drilling

Rechargeable 7.2V carbide drill, supplied with battery and charger, specially designed for drilling the impact point on your windscreen before injecting the resin. It is used with our 934, 4509w and 701 drill bits, ensuring precision and efficiency. This drill is also compatible with the polishing felt (ref. 971) for a perfect finish after repair....

Reference: 977

Brand: REPARBRISE

Large format UV screen 30 x 20 cm - windshield impact protection

Large-format 30 x 20 cm UV screen to protect against ultra-violet light during repairs.

Reference: 617

Cylinder vacuum nozzle

The cylinder vacuum nozzle is specially designed to remove air trapped in the impact on your windshield before injecting the resin. It comes with a specific hose without a connector and with a smaller diameter, suitable for precise and efficient work. This nozzle is for exclusive use with the 3200 cylinder and the 993 vacuum pump, ensuring optimal suction...

Reference: 994-N96

Brand: REPARBRISE

Injector for windshield repair resin injection for KIT-1320 - TERMINATOR 1 AND 2 - 2nd life

In good condition Only a few minor cosmetic defects - 1 Only one available 2nd LIFE warranty: 6 months Allows resin to be injected into impacts using a vacuum/pressure pump, ensuring precise and even application for high-quality repairs. Compatible with professional kits KIT-1320 and TERMINATOR 1 & 2, as well as with the vertical or inverted adapter...

Reference: HOS-2001

Nylon cleaning brush for HOS-2000 hose

Nylon cleaning brush specially designed for the HOS-2000 connection hose. It effectively removes excess resin used during windscreen repairs, ensuring optimal maintenance of your equipment and increased longevity of your connection hoses.

Reference: LUNETTE1048

UV protection glasses

When repairing windscreens, it is essential to wear UV protection goggles, especially when using UV LED lamps, such as our UV lamp 1048. These goggles provide optimal protection against ultraviolet rays, thus reducing the risks to the eyes and guaranteeing maximum safety. Characteristics: - Anti-UV filtration: Effective protection against UV exposure -...

Reference: FIX-5035

Brand: REPAREGLASS

Plastic screw for FIX-2001 injection bridge

Plastic screw designed for the FIX-2001 injection bridge, it allows precise adjustment of the bridge to achieve uniform sealing when injecting resin for windshield repair.

Reference: HOS-1000-T

2.50M vacuum pump connector hose for TERMINATOR 1 and 2 kits

Connection hose for vacuum pump, specially designed for the TERMINATOR 1 and 2 kits. This hose allows you to repair impacts on windscreens of commercial vehicles, trucks, buses, trams, and other vehicles requiring a long reach. Its length of 2.50 m offers optimal flexibility to easily reach repair areas, even on large windows.

Reference: 5095-N377

Brand: REPARBRISE

Standard Injector 5095 for kit 1330 and 1330SPECIAL - 2nd life

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Standard injector designed for windshield repair kits ref. 1330 and 1330SPECIAL. This injector ensures precise resin injection for common impacts. It comes with a seal to guarantee a perfect seal during repair. Not compatible with the old kit...

Reference: TER-BATTERIE

Brand: TERMINATOR

Battery for Kit TERMINATOR 1 and 2 and ULTRAPOSE EVOLUTION

Battery for TERMINATOR 1 and 2 Kit and ULTRAPOSE EVOLUTION. You can recharge this battery directly on the TERMINATOR or ULTRAPOSE EVOLUTION, using our TER-CHARGEUR charger.

Reference: 3200

Brand: REPARBRISE

Cylinder + piston for injection of windshield repair resin

Composed of 5 lips, it allows for greater vacuum and therefore faster repair of impacts on windshields. This cylinder + piston is compatible with injection bridges ref. 51 and 9620, as well as with tube ref. 996. To ensure optimal sealing and prevent any leaks due to wear on the seal, it is strongly recommended to order the interchangeable end caps ref....

Reference: 512

Miniature 220V/12V cigarette lighter voltage transformers

Miniature 220V/12V cigarette-lighter voltage transformers, for recharging equipment with a cigarette-lighter connector. Ex. UV lamp, drill, etc.

Reference: 993-N32

Brand: REPARBRISE

Pressure vacuum pump for REPAR'VIT Senior 1320 kit - -2nd LIFE - N32

Pump in very good condition. Only a few cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Vacuum pump delivered with hose ref.996 (quick connector on injector side and direct connection on pump) The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air...

Reference: FLEXI-BLADE

Flexible silicone wiper blade for windows and bodywork

Flexible wiper blade made in silicone. Allow to ease the removal of the water from surface to be dried. Appliable on the glass and metal.

Reference: 983

Brand: REPARBRISE

Seals (X2) for large impact adapter 946

These 2 seals are specially designed for the 946 heavy-duty impact adapter. It is essential to replace them regularly to ensure optimal sealing when injecting windshield repair resin. A seal in good condition ensures effective repair and reduces the risk of leakage.

Reference: 5095

Brand: REPARBRISE

Standard injector 5095 for kit 1330 and 1330SPECIAL

Standard injector designed for windshield repair kits ref. 1330 and 1330SPECIAL. This injector ensures precise resin injection for common impacts. It comes with a seal to guarantee a perfect seal during repair. Not compatible with the old kit ref. 1310.

Reference: 969-N371

Large probe for impact repair - 2nd LIFE - N371

Very Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: ISHP-BIG

Seals for ADAPT-PBV windshield adapter - Set of 10

Set of 10 seals specially designed for the ADAPT-PBV windshield adapter. These seals ensure a perfect seal during resin injection, which is essential for guaranteeing a clean and effective repair of windshield impacts. It is recommended to replace worn seals regularly to maintain optimal performance of your equipment.

Reference: 161

Brand: REPAREGLASS

Cigar lighter extension cable for battery

Extension cable for batteries. To put on the cigar lighter.

Reference: 996

Brand: REPARBRISE

1M hydraulic connection hose for 993 pump

Connection hose with female quick connector (on one side only), specially designed to fit only on the 993 vacuum pump and the 994 injector. This 1-meter hose ensures a secure and efficient connection for your windshield repair operations, facilitating resin suction and injection with perfect compatibility between your equipment.

Reference: 645-N34

Brand: REPARBRISE

12V carbide drill for impact drilling - 2nd life

In average condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months 12V carbide drill supplied with built-in chuck lock, specially designed for drilling the impact point on your windscreen before injecting the resin. It is used with our 934, 4509w and 701 drill bits to ensure precise and efficient drilling. This...

Reference: 818

Windshield heater for impact repair

The WINDSHIELD HEATER warms the repair area, usb powered, supplied with adapter + 5 thermometers Ref. 961 12v cigarette lighter and 220v mains, 2.5m cable, ideal for impact repairs, red or black depending on availability.

Reference: HOS-2002

Cleaning brush for injector 5069 or 5062

Nylon cleaning brush designed for 5069 or 5062 injectors. It allows you to remove excess windshield injection resin precisely and efficiently, ensuring perfect maintenance of your injectors for optimal performance during every repair.

Reference: 974

Special syringe for injecting resin to repair windshields

The syringe ref. 974 is specially designed for repairing impacts on windshields. It allows you to easily remove the injection resin from a bottle or pipette and then inject it precisely into the injector. Versatile, it can also be used to fill drill holes or fill cracks in the glass. An essential tool for ensuring clean, fast, and effective repairs.