TERMINATOR - 50 saniyede kuruyan LED ışıklı otomatik ön cam onarım sistemi

Reference: 524

Brand: REPARBRISE

24V/12V voltage transformers for buses and trucks

24V/12V voltage transformers for buses and trucks

Reference: 995

Brand: REPARBRISE

Seal for Injector 994 - windshield impact repair

Injector seal 994 provides a homogeneous seal for resin injection into the impact during windshield repair. 1. Homogeneous seal for precise injection Optimised sealing quality: This injector seal 994 provides a perfect seal, guaranteeing uniform and precise injection of the resin into the impact. This results in more effective and higher-quality...

Reference: 934

Brand: REPARBRISE

Special carbide drill 934 for windshield impact repair

Discover our Carbide Drill Bits specially designed for fast, clean drilling of the point of impact in star or bubble impacts. To be used with our different drills: ref.10357, ref.646, ref.645.

Reference: POSTER-OPB

Windshield repair and replacement poster with order forms pre-cut sheets included

Place your orders quickly with our integrated order form. Only available in French. FREE: VBSA glazing repair and tooling range poster with detachable order forms included. W: 1m x H: 0.70m

Reference: 931

Brand: REPARBRISE

Single 135 mm UV neon for 1046 and UVB-150 lamp

Single U.V. neon 135 mm - 931- for 1046 and UVB-150 lamp 

Reference: 970

Brand: REPARBRISE

Rigid plastic / mylar squares for curing resin - Pack of 10

Our special rigid plastic sheets, also known as mylar sheets, are specially designed for the polymerisation of the resin on the surface for impact repair. 1. Optimal solution for resin polymerisation High-quality Mylar sheets: These rigid plastic sheets are designed to facilitate and optimise the polymerisation of finishing resin on windscreen impacts,...

Reference: 539

Round UV screen Ø 9cm for deck 9620 - Impact protection

Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: 961

Brand: REPARBRISE

Thermometer strip for windshield - 8 to 34°C

Thermometer strip To define the temperature of the windshield before operate. Scale 8°-34°C

Reference: 926

Brand: REPARBRISE

Roll of special plastic film for repairing cracks and fissures

Roll of soft plastic film for crack repair. Our flexible plastic film is specially designed for surface curing of crack repair resin. Lay the film over the crack resin and then use a UV lamp to polymerise the crack repair on the windshield. Warning: not compatible with finishing resin.

Reference: 1330SPECIAL

Brand: REPAREGLASS

REPAR'VIT® WINDSHIELD REPAIR Tool box with a pressure/vaccum pump

REPAR'VIT® is used for various types of impact repairs: Bubble impacts Impacts with star-shaped bubbles Spangled impacts cracks Discover our glass repair case, complete with all the tools and accessories you need to carry out quality repairs to your windscreen. Ideal for professionals.

Reference: ADAPT-PBV

Adapter for vertical or reverse glazing

ADAPTER FOR VERTICAL OR INVERTED GLAZING Truck, bus, tractor, public works, combine harvester type.... The adaptor enables repairs to be carried out on vertical windscreens with a negative tilt of up to 20°. For use with injector 994, our 9620 bridge for TERMINATOR 1 and 2 cases, and 1320. Not compatible with FIX-2001, 2000, 367 and 51 bridges, cannot be...

Reference: 818

Windshield heater for impact repair

The WINDSHIELD HEATER warms the repair area, usb powered, supplied with adapter + 5 thermometers Ref. 961 12v cigarette lighter and 220v mains, 2.5m cable, ideal for impact repairs, red or black depending on availability.

Reference: 2000

Brand: REPAR'VIT

REPAR'VIT® double-adjustable injection bridge for flat windshields

Our 2000 REPAR'VIT® injection bridge is a support for injecting windshield repair resin. Our bridge can be used to repair impacts on the flat windshields of buses and lorries, as it has double adjustment for better positioning of the injector. It can be used with the standard FIX-2006 injector and the high-impact FIX-2005 injector.

Reference: 959

Brand: REPARBRISE

Carbide-tip pen for windschield impact

Carbide-tipped pen, used to remove surface impurities on the impact before repairing it.

Reference: 5095

Brand: REPARBRISE

Standard injector 5095 for kit 1330 and 1330SPECIAL

Standard injector for kit ref.1330 and kit ref.1330SPECIAL. Supplied with seal, not compatible with our old 1310 kit.

Reference: SOUS-MAIN

VBSA glazing repair and tool kit

Sous - main glass repair and equipment tool range VBSA with product referencesAllows you to have the most frequently used references close at handOnly available in French

Reference: RK-100A

Squeegee blades for glass and plastic

These squeegee blades offer an effective solution for cleaning and preparing glass and plastic surfaces. Ideal for removing adhesive residues, paint or stubborn dirt, they guarantee precise, careful work without damaging delicate surfaces. These blades combine durability and safety. Their razor-sharp cutting edge ensures optimum use for all workshop...

Reference: 3200

Brand: REPARBRISE

REPARBRISE Injector: Cylinder + piston for injection of windshield repair resin

REPAIR injector composed of a high quality cylinder + piston. Composed of 5 lips which allow an additional depression and a faster repair. Adapts to our injection bridges ref.51 and 9620. To avoid any leaks due to seal wear, we recommend that you also order the interchangeable end caps ref 3202 when purchasing the injector.

Reference: HOS-2001

Nylon cleaning brush for HOS-2000 hose

Nylon cleaning brush for HOS-2000 connection hose, for cleaning excess windshield repair resin.

Reference: 272

Crack spreader bar for windshield repairs

Crack spreader bar for windshield repairs. This tensioning bar helps to stabilise the crack during your repair.

Reference: DPG

Vacuum pump calibration tester for windshield repair

It's imperative to test the calibration of your vacuum pump at minimum once a year, to ensure quality repairs for your customers. French Standard regulation NF R61-980... Frequency of use: once a year. This new regulation allows to ensure that the pressure and vaccum cycles made from the pump are correct ( Pressure tolerance is 0,1 Bar) in order to avoid...

Reference: LR1-2OZ

Brand: REPAREGLASS

REPAREGLASS ® Standard windshield finishing resin

The finishing resin for repairing impacts on windshields is an ideal solution for restoring the transparency and strength of your damaged automotive glass. This high-strength resin allows for effective impact repair, while maintaining a clear and solid finish. It is designed to provide a long-lasting repair, capable of withstanding the stresses of driving...

Reference: TER-CHARGEUR

Brand: TERMINATOR

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits. Connect the charger to your TERMINATOR or ULTRAPOSE EVOLUTION to recharge the battery.

Reference: KIT-PLV

Special VBSA point of sale kit - Free

Our POS kit is free, so don't hesitate to ask for it. POS kit containing: - A VBSA general range desk mat - A mouse pad - A special windshield gluing poster (methodology) - A windshield repair poster (methodology) - A special windshield tools poster - A special windshield decontamination poster - Samples of windshield seals

Reference: 701

Brand: REPARBRISE

Drill ball 701 for drilling large windshield impacts

Our 701 large ball drill is specially designed for windshield repairs, for drilling through very large impacts. Sold individually

Reference: 958

Brand: REPARBRISE

Suction cup gel for adhesion to glazing

Our suction cup gel is specially designed to strengthen the adhesion of suction cups on windshields and car windows. 1. Strengthening the adhesion of suction cups Stronger adhesion: This suction cup gel is specially formulated to improve the adhesion of suction cups used in windshield and car window repairs. It ensures a strong and stable hold, even on...

Reference: 1046

Brand: REPARBRISE

UV LAMP - 12V - Special Resin Curing

12V UV lamp with timer To connect this lamp to the 230V mains, simply adapt our mini transformer Ref.512. Please note: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon (ref.931) at a frequency defined in accordance with standard NF R61-980, i.e: Continuous operation for 15 hours or approximately 90 repairs....

Reference: 1300

Brand: REPAR'VIT

1300 REPAR'VIT JUNIOR windshield repair kit

REPAR'VIT® is used for various types of impact repairs: Bubble impacts Impacts with star-shaped bubbles Spangled impacts cracks Discover our glass repair case, complete with all the tools and accessories you need to carry out quality repairs to your windscreen. Ideal for professionals. This windshield repair kit is similar to the REPAR'VIT®. The pump...

Reference: 51

Brand: REPAREGLASS

51 REPAREGLASS® injection bridge for windshield repairs

Our 51 REPAREGLASS® injection bridge is a support for injecting windshield repair resin and is used with our 3200 injector.

Reference: HOS-2010

Rubber Seals (x2) for HOS-2000, HOS-2000-L, HOS-1000-T vacuum pump hoses

Set of 2 replacement rubber seals for HOS-2000, HOS-2000-L and HOS-1000-T hose It is important to change the rubber seals frequently to ensure that the windshield repair resin is injected correctly. The rubber seal is situated inside the connector on your hose. If there is a leak in the hose, you can change the seal by using a wrench and unscrewing the...