REPARBRISE® SENIOR Alet kutusu

Reference: 946

Brand: REPARBRISE

Large impact windshield pit adapter

Warning: sold without seal, seal reference in stock 983 Adapter for repairing large impacts, it adapts to our 3200 and 994 injectors to enable you to repair large impacts on the windshield. It can be used with our 1320, 951 and TERMINATOR 1 and 2 kits.

Reference: RK-100A

Squeegee blades for glass and plastic

These squeegee blades offer an effective solution for cleaning and preparing glass and plastic surfaces. Ideal for removing adhesive residues, paint or stubborn dirt, they guarantee precise, careful work without damaging delicate surfaces. These blades combine durability and safety. Their razor-sharp cutting edge ensures optimum use for all workshop...

Reference: UVB-150-T

Battery-powered UV lamp for resin curing

Our battery-powered UV lamp is a practical tool for curing Windshield Repair Resin. It's highly portable, with sufficient power to ensure that the resin cures quickly and efficiently. The lamp is lightweight and ergonomic, making it easy to cure the resin. Supplied with 4 AA batteries

Reference: 524

Brand: REPARBRISE

24V/12V voltage transformers for buses and trucks

24V/12V voltage transformers for buses and trucks

Reference: 934NR

Brand: REPAREGLASS

Special carbide drill bit 934NR for windshield impact repair - Set of 5

Discover our carbide-tipped drills specially designed for fast and clean drilling of the impact point in the case of star or star-bubble impacts. 1. Fast and precise drilling Designed for star and star-bubble impacts: These drill bits are specifically developed to drill effectively and cleanly into damaged areas of windshields, such as star or...

Reference: 5BX-02010

Rubber seals Ø 1.5 cm for large impact injector 5096 and FIX-2005

Ø 1.5 cm seals for large impact injector 5096 and FIX-2005. It is important to change the seals regularly to ensure a good seal when injecting windshield repair resin. 1 bag of 5 pieces

Reference: HOS-2000-L

2.50M long connector hose for Bus and Truck for 1110 and PMP-ADVANTAGE pumps

Long connection hose for bus and truck, vans, trams, etc... compatible with 1110 and PMP-ADVANTAGE vacuum pumps, our 5095 and 5096 injectors. Used in our 1330 and 1330SPECIAL kits, not compatible with our 1320 and TERMINATOR 1 and 2 kits. Length : 2.50M

Reference: 184

Brand: REPAREGLASS

Set of no-rigid plastic sheet for crack repair

Booklet of special flexible plastic sheets for crack repair. Our Special Flexible Plastic Sheets are specially designed to cure the resin on the surface of the crack repair. Lay the sheet over the crack resin and then use a UV lamp to cure the crack repair on the windshield. Warning: not compatible with finishing resin.

Reference: 985

Vaccum plug for suction of impact impurities

Vaccum plug to remove impurities from the windshield impact. Diameter 3cm The Vaccum plug is used with the vacuum pump ref.993.

Reference: PORTE-CT

Adhesive sticker holder for car inspections - pack of 100

Adhesive sticker holder for neutral technical inspection Our sticker holders are completely self-adhesive over their entire surface. Pack of 100 sticker holders (75 x 75mm)

Reference: 230

Brand: REPAREGLASS

Aluminium Empty case 331 x 257 x 68 mm

REF-ALK230 Couteau télescopique ajustableIl s’ajuste de 45 à 50 cm de longueur. S’utilise avec les lames TKS-100 et ULB-582. Lames en complément stockées sous le capot

Reference: ISHP-BIG

Joints pour adaptateur pare-brise ADAPT-PBV - Lot de 10

Reference: 1320

Brand: REPAR'VIT

REPAR'VIT® NEW GENERATION windshield impact repair kit

REPAR'VIT® is used and listed by a large number of car manufacturers. Meets AFNOR NF n° X5021 and REACH standards. Discover our glazing repair kit, complete with all the tools and accessories you need to carry out quality repairs to your windscreen. Ideal for professionals.

Reference: KIT-FENTES-RPB

Specific repair kit for cracks

Specific repair kit for windshield cracks. This kit contains everything you need to effectively repair cracks in your windscreen and avoid having to replace it.

Reference: 1330SPECIAL

Brand: REPAREGLASS

REPAR'VIT® WINDSHIELD REPAIR Tool box with a pressure/vaccum pump

REPAR'VIT® is used for various types of impact repairs: Bubble impacts Impacts with star-shaped bubbles Spangled impacts cracks Discover our glass repair case, complete with all the tools and accessories you need to carry out quality repairs to your windscreen. Ideal for professionals.

Reference: 977

Brand: REPARBRISE

Large format UV screen 30 x 20 cm - windshield impact protection

Large-format 30 x 20 cm UV screen to protect against ultra-violet light during repairs.

Reference: DPG

Vacuum pump calibration tester for windshield repair

It's imperative to test the calibration of your vacuum pump at minimum once a year, to ensure quality repairs for your customers. French Standard regulation NF R61-980... Frequency of use: once a year. This new regulation allows to ensure that the pressure and vaccum cycles made from the pump are correct ( Pressure tolerance is 0,1 Bar) in order to avoid...

Reference: HOS-1000-T

2.50M vacuum pump connector hose for TERMINATOR 1 and 2 kits

Vacuum pump connector hose for TERMINATOR 1 and 2 kits - Ideal for repairing impacts on the Windshields of utility vehicles, trucks, buses, trams, etc....  Length: 2.50 M

Reference: 970

Brand: REPARBRISE

Rigid plastic / mylar squares for curing resin - Pack of 10

Our special rigid plastic sheets, also known as mylar sheets, are specially designed for the polymerisation of the resin on the surface for impact repair. 1. Optimal solution for resin polymerisation High-quality Mylar sheets: These rigid plastic sheets are designed to facilitate and optimise the polymerisation of finishing resin on windscreen impacts,...

Reference: POSTER-TERMINATOR

Poster TERMINATOR automatic windshield impact repair process 50 x 70 cm

Poster TERMINATOR automatic windshield impact repair process 50 x 70 cm Available for export only with a product order. No delivery possible on its own

Reference: 948

Special windshield repair scraper blades - Pack of 5

These scraping blades are specially designed to remove excess finishing resin after a windscreen repair. 1. Precise, scratch-free scraping Impeccable finish: These scraping blades are specially designed to effectively remove excess finishing resin after a windscreen repair. They enable precise scraping without damaging or scratching the repaired surface,...

Reference: 5096

Brand: REPARBRISE

Large impact packer 5096 for 1330 and 1330SPECIAL kits

Large impact injector for kit ref.1330 and kit ref.1330SPECIAL. Supplied with seal, not compatible with our old 1310 kit.

Reference: KIT-TERMINATOR-MAXI

Brand: TERMINATOR

TERMINATOR: AUTOMATIC WINDSHIELD REPAIR SYSTEM

VOTED EQUIPMENT OF THE YEAR 2017: Read the article VBSA REVOLUTIONISES WINDSHIELD REPAIR  The TERMINATOR motorised windscreen repair kit is an injection process with a motor. It is so intuitive that even someone who doesn't repair windscreens on a daily basis is able to carry out perfect repairs. The operator no longer has to stand in front of the impact...

Reference: PMP-ADVANTAGE

Brand: REPAR'VIT

Pressure vacuum pump for REPAR'VIT kit 1330SPECIAL and 1300

The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump will inject the resin uniformly into the impact.

Reference: KIT-MULTI-REP

Brand: TERMINATOR

Windscreen multi-repair kit for KIT TERMINATOR 2

Multi-repair kit allowing you to perform 3 simultaneous repairs with our KIT-TER2-LED See the technical video: HERE CONTENT OF THE TOOL BOX: REF. 945 Mirror x 2 REF. 994 Aluminium injector x 2 REF. 994JOINT Aluminum injector x 6 REF. 539 Round UV screen x 2 REF. 9620 Injection bridge x 2 REF. HOS-1000-T Hose x 2 REF. 995 Rubber seals 994 x 6

Reference: 996

Brand: REPARBRISE

1M hydraulic connection hose for 993 pump

Connection hose with quick-fit connector (female on 1 side only) suitable only for 993 vacuum pump and 994 injector. Length: 1M

Reference: KIT-TER2-LED

Brand: TERMINATOR

TERMINATOR2 kit: New concept Multi-repairs

3-in-1 multi-repair!         NO MORE WAITING! VBSA REVOLUTIONISES WINDSCREEN REPAIRS  No more waiting to repair several impacts on the same windscreen or to move on to the next vehicle. Its STRENGTHS: Now you can carry out up to three repairs simultaneously! Compatible with the first-generation case Easily accessible battery Available as a module for the...

Reference: FIX-2044

Brand: REPAR'VIT

Metal resin injector for FIX-2001 injection bridge

Metal injector for windshield repair resin injection for FIX -2001 injection bridge

Reference: HOS-2002

Cleaning brush for injector 5069 or 5062

Nylon cleaning brush for injector 5069 or 5062 to clean excess injection resin from the windscreen

Reference: TER-CHARGEUR

Brand: TERMINATOR

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits. Connect the charger to your TERMINATOR or ULTRAPOSE EVOLUTION to recharge the battery.