REPARBRISE ayna (Pleksiglas)

Reference: 985

Vaccum plug for suction of impact impurities

Vaccum plug to remove impurities from the windshield impact. Diameter 3cm The Vaccum plug is used with the vacuum pump ref.993.

Reference: FIX-5063-DESTOCK

Brand: REPAR'VIT

Aluminium screw for injection bridge 367

Aluminium screw for injection bridge 367, holds injectors 5095 and 5096 to the windshield to ensure a seal during resin injection.

Reference: ADAPT-PBV

Adapter for vertical or reverse glazing

ADAPTER FOR VERTICAL OR INVERTED GLAZING Truck, bus, tractor, public works, combine harvester type.... The adaptor enables repairs to be carried out on vertical windscreens with a negative tilt of up to 20°. For use with injector 994, our 9620 bridge for TERMINATOR 1 and 2 cases, and 1320. Not compatible with FIX-2001, 2000, 367 and 51 bridges, cannot be...

Reference: 5096

Brand: REPARBRISE

Large impact packer 5096 for 1330 and 1330SPECIAL kits

Large impact injector for kit ref.1330 and kit ref.1330SPECIAL. Supplied with seal, not compatible with our old 1310 kit.

Reference: 979

Brand: REPARBRISE

Special windshield repair light pen

Our 979 pen light provides a better view of the impact injection during the repair of your windshield.

Reference: 983

Brand: REPARBRISE

Seals (X2) for large impact adapter 946

Seals (X2) for large impact adapter 946. It is important to change the seals regularly to ensure a good seal when injecting the Windshield Repair Resin.

Reference: 539

Round UV screen Ø 9cm for deck 9620 - Impact protection

Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: 617

Cylinder vacuum nozzle

Cylinder vacuum nozzle. Removes air trapped in the impact. Supplied with specific hose without connection and a smaller diameter. (for use with the 3200 cylinder and 993 vacuum pump).

Reference: HOS-2000-L

2.50M long connector hose for Bus and Truck for 1110 and PMP-ADVANTAGE pumps

Long connection hose for bus and truck, vans, trams, etc... compatible with 1110 and PMP-ADVANTAGE vacuum pumps, our 5095 and 5096 injectors. Used in our 1330 and 1330SPECIAL kits, not compatible with our 1320 and TERMINATOR 1 and 2 kits. Length : 2.50M

Reference: 994

Brand: REPARBRISE

Injector for windshield repair resin for KIT-1320 - TERMINATOR 1 AND 2

Injector allowing you to inject windshield repair resin using a pressure vacuum pump. Used in KIT-1320 - TERMINATOR 1 AND 2, fits perfectly with our vertical or reversed windshield adaptor ref. ADAPT-PBV. It is suggested that you also order the injector to avoid leaks due to wear of the seal: - To replace the seal in contact with the windshield, use ref....

Reference: HOS-2002

Cleaning brush for injector 5069 or 5062

Nylon cleaning brush for injector 5069 or 5062 to clean excess injection resin from the windscreen

Reference: ISHP-BIG

Joints pour adaptateur pare-brise ADAPT-PBV - Lot de 10

Reference: 995

Brand: REPARBRISE

Seal for Injector 994 - windshield impact repair

994 injector seal provides a uniform seal for injecting resin into the impact during Windshield repair. It is important to change the seals frequently. Available individually or in packs of 10.

Reference: 959

Brand: REPARBRISE

Carbide-tip pen for windschield impact

Carbide-tipped pen, used to remove surface impurities on the impact before repairing it.

Reference: PEZ-120

Anti-skid roof/hood liner

Protect the paintwork on your vehicle's roof or hood when you're working on it, with our non-slip protective canvas. Ideal for bodybuilders and garages, it offers a practical and safe solution for fitting tools, screws and small assembly equipment without the risk of damaging the vehicle's surface. Dimensions and weight : Dimensions: 1720 x 700 x 2 mm....

Reference: RS-2030

Pack of 5 special resin injection syringes for windshield repairs

Resin dispenser pack consisting of 5 syringes and 3 needles. The RS-2030 syringe lets you remove the injection resin from the bottle or pipette and inject it into the injector. You can also use the syringe to fill drill holes and cracks in your windscreen.

Reference: HOS-2000

1M connector hose for 1110 pump and PMP-ADVANTAGE

Connection hose for vacuum pump 1110 and PMP-ADVANTAGE and injector 5095 or 5096 for windshield repair. Length: 1M

Reference: HOS-2001

Nylon cleaning brush for HOS-2000 hose

Nylon cleaning brush for HOS-2000 connection hose, for cleaning excess windshield repair resin.

Reference: 161

Brand: REPAREGLASS

Cigar lighter extension cable for battery

Extension cable for batteries. To put on the cigar lighter.

Reference: 931

Brand: REPARBRISE

Single 135 mm UV neon for 1046 and UVB-150 lamp

Single U.V. neon 135 mm - 931- for 1046 and UVB-150 lamp 

Reference: FIX-2025

Brand: REPAR'VIT

Replacement plunger piston for injection bridge and suction cup

Replacement piston for our bridges REF-2000, REF-367, REF-9620, and our suction cup REF-GEZ-543-1.

Reference: HOS-2010

Rubber Seals (x2) for HOS-2000, HOS-2000-L, HOS-1000-T vacuum pump hoses

Set of 2 replacement rubber seals for HOS-2000, HOS-2000-L and HOS-1000-T hose It is important to change the rubber seals frequently to ensure that the windshield repair resin is injected correctly. The rubber seal is situated inside the connector on your hose. If there is a leak in the hose, you can change the seal by using a wrench and unscrewing the...

Reference: 994CLAP

Brand: REPAREGLASS

Plunger for Injector Inox 994

Inox 994 injector plunger for windshield impact repair

Reference: 770

Brand: REPARBRISE

Window / windshield cleaner 20L - Mosquito repellent -770

Eliminates traces of oil, insects and dust. Used in industry, cars and construction. For cleaning windshields, windows and outside mirrors. Sold in 20L drums Also available - 750ml aerosol - Ref.768 and 5L drum - Ref.769

Reference: FIX-2044

Brand: REPAR'VIT

Metal resin injector for FIX-2001 injection bridge

Metal injector for windshield repair resin injection for FIX -2001 injection bridge

Reference: IFA-300

Infrared thermometer for glass temperature control

Infrared thermometer for checking the temperature on your Windshield. 

Reference: 524

Brand: REPARBRISE

24V/12V voltage transformers for buses and trucks

24V/12V voltage transformers for buses and trucks

Reference: FIX-2006

Brand: REPAR'VIT

Standard resin filler injector for REF -2000 bridge

Standard resin filling chamber for REF-2000 bridge Ø 0,9 cm

Reference: LUNETTE1048

UV protection glasses

UV protection glasses It is absolutely essential to wear protective glasses during windshield repairs when using our LED UV lamps, for example our UV lamp 1048.

Reference: TER-CHARGEUR

Brand: TERMINATOR

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits. Connect the charger to your TERMINATOR or ULTRAPOSE EVOLUTION to recharge the battery.