Paire de ventouses pour vitres latérales - 2nd vie

Reference: DESTOCK-PRP21

Piston automatique - Equalizer Powerpump

Reference: VP-230SPECIALE-N338

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N338

In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...

Reference: GEZ-543-1-N339

Piston Suction Cups – Diameter 150 mm -load capacity 62kg – 2nd VIE – N339

Suction cup in good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months This piston suction cup is specially designed for installing and removing automotive glass. Its ergonomic handle ensures a secure and comfortable grip, even when handling large glass...

Reference: NET-VENT

Rubber cleaner

Rubber Cleaner is specially designed to clean and restore the appearance of all your rubber components such as seals, rubberized hubcaps, suction cups and similar surfaces. It effectively removes dirt and residues and restores the shine of rubber, prolonging its durability and appearance. Caution: This product is not recommended for certain plastics or...

Reference: VP-205-N350

Piston Suction Cup – Diameter 205 mm – Lifting Capacity 260 kg - Second Life - N350

Suction cup in good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months SOLD INDIVIDUALLY – DELIVERED IN A CARRYING CASE This piston suction cup, with a 205 mm diameter, is specifically designed for heavy-duty lifting and handling. Its piston mechanism...

Reference: KIT-VP-230-E

Electric suction cup kit - Diameter 200mm

KIT consisting of a suction cup (REF.VP-230), 2 lithium batteries 3W- 3.7V (REF.VP-230-E-BAT) and a charger (REF.VP-230-E-CHARG). Diameter: 200mm, Flat suction cup, cannot be used on curved glass. Ideal for flat windscreens such as lorries, buses, etc. Standard suction= 160kg Maximum vertical suction = 180 kg Maximum horizontal suction= 200 kg Charger and...

Reference: VP-230-N316

Piston Suction Cup Ø 230 mm – Lifting Capacity 380 kg - Second Life - N316

In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting power,...

Reference: VP-230-E-BATT

Battery for automated suction cup VP-230-E

Battery for automated suction cup VP-230-E, with charge indicator.

Reference: FRE-080-P-N153

Retention device: metal strip and trim - 2nd life

In average condition Cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months To prevent the corners of hubcaps from sticking out, they are often attached with adhesive tape. However, this method carries risks: adhesives can react chemically with the vehicle's paintwork, causing damage. The ideal solution?...

Reference: VP-205-N347

Piston Suction Cup – Diameter 205 mm – Lifting Capacity 260 kg - Second Life - N347

Suction cup in good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months SOLD INDIVIDUALLY – DELIVERED IN A CARRYING CASE This piston suction cup, with a 205 mm diameter, is specifically designed for heavy-duty lifting and handling. Its piston mechanism...

Reference: GEZ-543-1-N342

Piston Suction Cups – Diameter 150 mm -load capacity 62kg – 2nd VIE – N342

Suction cup in good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months This piston suction cup is specially designed for installing and removing automotive glass. Its ergonomic handle ensures a secure and comfortable grip, even when handling large glass...

Reference: FRE-080-P-N167

Retention device: metal strip and trim - 2nd life

In good condition Cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months To prevent the corners of hubcaps from sticking out, they are often attached with adhesive tape. However, this method carries risks: adhesives can react chemically with the vehicle's paintwork, causing damage. The ideal solution? Our...

Reference: VP-230SPECIALE-N330

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N330

In very good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...

Reference: GEZ-543-1-N241

Piston Suction Cups – Diameter 150 mm -load capacity 62kg – 2nd VIE

Suction cup in very good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months This piston suction cup is specially designed for installing and removing automotive glass. Its ergonomic handle ensures a secure and comfortable grip, even when handling large...

Reference: PSH-125-DESTOCK

Pair of suction cups for flat windshields - Load capacity: 40 kg - Destock

Only 65 units in stock Pair of suction cups. The suction cups allow you to lift a flat glass pane ready for installation safely. Simply place the suction cups on the glass and press the levers down to create a vacuum. The glass pane can now be transported safely. Please note that these suction cups have been developed for a load capacity of: 40 kg...

Reference: FRE-080-P-N168

Retention device: metal strip and trim - 2nd life

In average condition Cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months To prevent the corners of hubcaps from sticking out, they are often attached with adhesive tape. However, this method carries risks: adhesives can react chemically with the vehicle's paintwork, causing damage. The ideal solution?...

Reference: VP-230SPECIALE-N327

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N327

In very good conditionOnly cosmetic defects shown in the photos are present - 1 Only one item available2nd LIFE warranty: 6 monthsØ 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass SurfacesDesigned for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...

Reference: PSL-150-1

Suction cup deluxe sold individualy (Ø 150 mm)

Suction cup deluxe sold individualy (Ø 150 mm)Easier and safer to attach that common suction lifters with clamp lever technology.The bell shaped rubber pads already adhere onto the glass surface with slight pressing even before pressing the lever.Possibility to pass a belt through. Load capacity for each lifter is 80 kg.

Reference: PSH-120-1-N27

Single suction cup N27 - 2ème VIE - Load capacity: 80 kg

Suction cup in good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The suction cup allows you to lift a window pane that is ready to be installed safely (2 are required). The edge of the window pane must not be touched after it has been prepared for...

Reference: VP-205

Piston Suction Cup – Diameter 205 mm – Lifting Capacity 260 kg

SOLD INDIVIDUALLY – DELIVERED IN A CARRYING CASE This piston suction cup, with a 205 mm diameter, is specifically designed for heavy-duty lifting and handling. Its piston mechanism creates a vacuum for powerful and secure adhesion, with a lifting capacity of up to 260 kg. It is especially suitable for transporting bus windshields and other large glass...

Reference: PSH125NA-DESTOCK

Pair of suction cups for flat windshields - Load capacity: 40 kg - Destock

Only 65 units in stock Pair of suction cups. The suction cups allow you to lift a flat glass pane ready for installation safely. Simply place the suction cups on the glass and press the levers down to create a vacuum. The glass pane can now be transported safely. Please note that these suction cups have been developed for a load capacity of: 80 kg...

Reference: RL-1382

SUCTION CUP OF MAINTENANCE OF windshield

Windshields adjustment suction cupStops the windshield in the correct place. ere is a simple solution to one ofthe most annoying problems a technician faces today.When a vehicle does not have stops it is difficult for one person to set thewindshield because he does not have anything to set it on.Here is the solution, before removing the old windshield put...

Reference: PSH-120-VERIBOR

Veribor suction cup pair Ø 120 mm

VERIBOR SUCTION CUP PAIR.REF. PSH-120-VERIBOR• Ø 120 mm : Loading capacity : 80 kg

Reference: VP-205-N348

Piston Suction Cup – Diameter 205 mm – Lifting Capacity 260 kg - Second Life - N348

Suction cup in average condition - Please note, sold individually Cosmetic defects shown in the photos are present - Only one item available 2nd LIFE warranty: 6 months SOLD INDIVIDUALLY – DELIVERED IN A CARRYING CASE This piston suction cup, with a 205 mm diameter, is specifically designed for heavy-duty lifting and handling. Its piston mechanism creates...

Reference: VSP-290-N176

Pair of suction cups for side windows - 2nd life

In good condition - Orange color Only a few minor cosmetic defects - 1 Only one item available 2nd LIFE warranty: 6 months This pair of suction cups makes it much easier to handle side windows by holding them firmly in the desired position. This leaves both hands free to work safely and accurately. Simply pass the tool's cable over the door, then attach...

Reference: PSH-120

Pair of suction cups - Load capacity: around 80kg

Pairof suction cups (Ø 120 mm)Vacuum cups allow you to hold safely a window that is ready to install. The edge of the window must not be touched once the window is ready for the installation. Each vacuum swivels up and down approximately 30° to fit radically contoured glass. Simply set the vacuum cups in place and push the thumb latches down to engage the...

Reference: VP-230SPECIALE-N333

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N333

In very good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...

Reference: VP-230SPECIALE-N329

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N329

In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...

Reference: VP-230-N317

Piston Suction Cup Ø 230 mm – Lifting Capacity 380 kg - Second Life - N317

In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting power,...

Reference: VP-230SPECIALE-N328

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N328

In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...