Single suction cup N27 - 2ème VIE - Load capacity: 80 kg

Reference: 04200101-N283

Windshield table with suction cups, non-removable legs (old version) - N283

Adjustable windshield table ALWAYS IN ITS PACKAGING BOX - NOT ASSEMBLED General functioning: OK Only the aesthetic defects shown in the photos appear on this rack - 1 Only one available SECOND LIFE guarantee: 6 months - 1 hanging chain - red lacquered steel tube. - 4 rubbers keep the windows secure and in the original position. Size 115 cm x 182 cm x 88...

Reference: PSH-120-1-N24

Single suction cup N24 - 2ème VIE - Load capacity: 80 kg

Suction cup in very good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The suction cup allows you to lift a window pane that is ready to be installed safely (2 are required). The edge of the window pane must not be touched after it has been prepared...

Reference: VP-230SPECIALE-N333

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N333

In very good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...

Reference: 278KITAGRAFES-N293

Plastic repair kit - staple welding (6mm) - Second Life - N293

Kit in good condition. Sold with 100 staples of 4 different types in 6 mm instead of 8 mm, please note that this kit does not contain smoothing staples Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The staple-welded plastic repair kit is a professional solution for effectively repairing all...

Reference: 1046-N78

Brand: REPARBRISE

2nde Vie - Old generation UV lamp -12V- Special resin polymerisation - N78

12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: N/A This lamp has numerous scratches and signs of wear, as shown in the photos - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important...

Reference: PSH-120-1-N70

Single suction cup N70 - 2ème VIE - Load capacity: 80 kg

Suction cup in very good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The suction cup allows you to lift a window pane that is ready to be installed safely (2 are required). The edge of the window pane must not be touched after it has been prepared...

Reference: 1046-N181

Brand: REPARBRISE

2nde Vie - New generation UV lamp -12V- Special resin polymerisation - N181

12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: RAS Only aesthetic defects shown in the photos appear - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon...

Reference: 1046-N186

Brand: REPARBRISE

2nde Vie - Old generation UV lamp -12V- Special resin polymerisation - N186

12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: N/A This lamp has numerous scratches and signs of wear, as shown in the photos - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important...

Reference: VP-230SPECIALE-N338

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N338

In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...

Reference: HDS-480NEW-N278

2nde VIE - Adjustable windshield table with leg locking system -N278

Adjustable windshield table ALWAYS IN ITS PACKAGING BOX - NOT ASSEMBLED General functioning: OK Some minor aesthetic defects present on this table- 1 Only one available 2ND LIFE warranty: 6 months - Adjustable for various lengths and weights to support any type of windshield. - Extremely strong material - Electrogalvanised steel legs, 30 mm in diameter....

Reference: 04200101-N282

Windshield table with suction cups, non-removable legs (old version)-N282

Adjustable windshield table ALWAYS IN ITS PACKAGING BOX - NOT ASSEMBLED General functioning: OK Only the aesthetic defects shown in the photos appear on this rack - 1 Only one available SECOND LIFE guarantee: 6 months - 1 hanging chain - red lacquered steel tube. - 4 rubbers keep the windows secure and in the original position. Size 115 cm x 182 cm x 88...

Reference: CLIPS-AGRAFES-55PCS-N47

Set of 55 windshield clips and staples - 2nd LIFE - N47

Sets of 55 various windshield clips and staples

Reference: KIT-AZOTE-MAXI-N4

Complete PLASTIC AZOTE WELDING KIT - SECOND CHOICE n°4

ATTENTION 1 device available With integrated generator No operating faults. Minor cosmetic defects in the form of scratches and lack of paintwork.

Reference: CAISSE-N396

Storage case L: 44 cm x H: 17 cm x W: 19 cm - 2nd LIFE - N396

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Storage case Length: 44cm - Width: 17cm - Height: 19cm

Reference: BOS8-N240

Economical dent removal lamp - 2nd LIFE - N240

General operation: RAS Dent removal lamp used very little in commercial demonstrations, a few micro scratches visible - 1 Only one available 2nd LIFE warranty: 6 months The essential tool for accurate and efficient bodywork dent repair! Thanks to its reflection system, this lamp allows you to clearly visualize deformations, providing a precision guide for...

Reference: VP-230SPECIALE-N336

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N336

Average condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...

Reference: DEV-BOB-CHAM-N273

Dispenser for BOB-CHAM or BOB-FIBRE cleaning paper - Seconde Life - N273

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Make it easier to use your wiper rolls with this sturdy and practical dispenser, designed to hold BOB-CHAM and BOB-FIBRE rolls. Ideal for workshop use, it ensures a smooth and controlled distribution of hand towels while guaranteeing quick and...

Reference: AEB405-N193

Pneumatic knife: Equalizer® EXCALIBUR® DELUXE - 2nd LIFE - N193

Kit in good condition. The case may be incomplete (blades). Only cosmetic defects shown in the photos are present. Only one item available. 2nd LIFE warranty: 6 months Recommended for cutting the lower parts of the windscreen, rear windows and quarter windows. Cutting the interior of the vehicle. Compact and lighter, it is even easier to handle,...

Reference: PTB-6030-N130

Dashboard protection 60 X 30 cm - Second Life - N130

Condition: fair - 1 item available 2nd LIFE warranty: 6 months Dashboard protection 60 X 30 cm Option: Suction cup (pack of 2) Réf.VENT-6030

Reference: 278KITAGRAFES-N291

Plastic repair kit - staple welding (6mm) - Second Life - N291

Kit in good condition. Sold with 100 staples of 4 different types in 6 mm instead of 8 mm, please note that this kit does not contain smoothing staples Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The staple-welded plastic repair kit is a professional solution for effectively repairing all...

Reference: DESTOCK-CLEAN-SET

Interior car protection set - 2nd choice

CAUTION: Some sets may have fragile gear lever and handbrake protectors (tear) This car interior protection set is designed to keep the vehicle safe and clean during any work. It provides the necessary protection before working on a customer's vehicle, effectively protecting the sensitive parts of the interior. This set is ideal for automotive...

Reference: 969-N103

Large probe for impact repair - 2nd LIFE - N103

Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: 366-N20

Brand: REPARBRISE

366 REPAR'VIT® Senior injection bridge for windshield repair - 2nd LIFE - N20

Condition: fair - 1 item available 2nd LIFE warranty: 6 months 366 REPAR'VIT® Senior injection bridge, designed to ensure precise resin injection during windscreen repairs.

Reference: VP-230-N319

Piston Suction Cup Ø 230 mm – Lifting Capacity 380 kg - Second Life - N319

In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting power,...

Reference: 1046-N80

Brand: REPARBRISE

2nde Vie - New generation UV lamp -12V- Special resin polymerisation - N80

12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: RAS Only aesthetic defects shown in the photos appear - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon...

Reference: 969-N101

Large probe for impact repair - 2nd LIFE - N101

Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: 1046-N7

Brand: REPARBRISE

2nde Vie - New generation UV lamp -12V- Special resin polymerisation - N7

12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: RAS Only aesthetic defects shown in the photos appear - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon...

Reference: VP-230SPECIALE-N334

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N334

Average condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...

Reference: 945-N85

Brand: REPARBRISE

Square mirror REPARBRISE (Plexiglass) - Second Life - N85

Vacuum cleaner in good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Reparbrise 945 Plexiglas square mirror for repairing windscreen impacts. This mirror allows you to view the impact throughout the repair process. Dimensions: 9.5cm x 9.5cm

Reference: 1046-N235

Brand: REPARBRISE

2nde Vie - New generation UV lamp -12V- Special resin polymerisation - N235

12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: RAS Only aesthetic defects shown in the photos appear - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon...